• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.337-345
• /
• 2009

The purpose of this study were to find out the differences in kinematic variables of racket movement by performing the tennis serve. Three top male tennis players participated in this study. Three synchronized high-speed cameras were used to record the service action of top players for Three dimensional video analysis. The results of this study showed that (1) the velocity of the tennis racket at impact is important to the generation of racket velocity to Y-axis. This result indicates that forward motion and upward movement of the racket; (2) with respect to racket angular velocity at impact, the fast angular momentum of X-axis is important to generate the velocity of the tennis ball. This result indicate upward movement of the racket with a strong flexor of wrist joint; (3) the velocity of the tennis ball was influenced by the change of angular linking the Z-axis to -X-axis. This result indicates that the high velocity of the tennis ball is obtained from having the racket unitedly moving to the direction of the bill's flight at the acceleration interval and acquiring the distance of acceleration with the racket head vertically to the ground at the back scratching.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.601-610
• /
• 1986

The acoustic intensity in the very near field of a vibrating surface reveals information about the location of sound sources and sinks. A system model of tennis racket was developed from simultaneous measurement of excitation force, surface vibration and the near field sound pressure. The characteristics of structural dynamics were obtained by standard experimental modal analysis techniques while the sound radiation characteristics were determined by estimating the acoustic intensity. In this paper, the information about vibration behviour was obtained by acoustic intensity method and some, experiments for verification were carried out. Close correlation was found between experimentally determined acoustic intensity and vibration mode patterns of the tennis racket.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.465-474
• /
• 2014

This research aimed to enhance the effects of training through the use of infrared cameras located at anterior and posterior positions. The results were as follows. In the case of the smash, the impact time needed to be adjusted to raise their impact point. The smash of S1, on the other hand, was a step smash, which showed the fastest racquet head speed and the greatest transmission of power upon impact. As the max racquet speed upon impact and during speed was similar, S1 showed the best impact time. All athletes except S6 were shown to use their right foot as their 1 step that was located in front upon landing, using a hop step as their first step. For the best swing upon stroke, it is important to make the best conditions possible for the use of elbow joints and wrist joints. The rotating radius of the racquet should be big and the shuttlecock should be fast. Balance is important in footwork, or the coordinated movement of the feet. Without a correct step it is difficult to execute an efficient stroke. In an actual game, steps need to be executed in 2 to 4 steps, and programs focusing on steps according to situation, agility and reaction need to be executed.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1143-1155
• /
• 2021

The results of the analysed to compare the kinematic variables of backhand backwall boast shot motion between the expert and novice subjects through three dimensional cinematography. First, the expert took shorter time than novice to finish the motion. Second, the racket of expert showed side-horizontally higher, vertically lower and front-horizontally higher displacement than novice in the downswing phase. Third, the racket of expert showed vertically and front-horizontally lower displacements than novice during the follow through phase. Fourth, the velocity of racket was faster for the novice. Five, the velocity of lower arm was faster for the novice.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.147-158
• /
• 2008

The purpose of this study was to analyze the kinematical variables involved in two types of service motion in tennis pinpoint and platform stance, to find the fastest serving method. Seven skilled high school tennis players participated, and the kinematics were recorded by the Vicon motion analysis system. For the gathering and analysis of the data workstation, bodybuilder and polygon were used. During the back swing for the pinpoint stance, as the back leg moves forward the COM and the racquet moves more, thus taking 0.04 seconds longer than the platform stance. The body of the subject takes a bow-shape as the subject's foot moves back and their hip moves forward. This movement enables the subject to create more power during the backswing to impact. It also increases the spread of the COM racquet and the serve speed is increase. As there is no forward movement of the foot during the backswing of the platform stance, the COM and the racquet move less and thus the time required is shorter than that for the pinpoint stance by 0.04seconds. Similarly, the time spent creating the power for the serve is shortened, the COM racquet is narrower and the speed is lessened. However, the advantage of this serve is that it increases the stability.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.915-919
• /
• 2007

가상현실은 컴퓨터를 이용하여 만들어진 가상의 환경에서 사용자가 오감을 통해 현실과 유사한 느낌을 경험할 수 있도록 해주는 기술이다. 햅틱 인터페이스는 사용자가 촉각으로 가상 환경과 상호 작용을 할 수 있도록 해주는 기술로서 사용자가 가상 물체를 실제로 만지는 듯한 착각을 불러 일으켜 보다 현실에 가까운 가상 경험을 할 수 있도록 도와준다. 본 논문에서는 다양한 용도로 사용할 수 있는 3차원 햅틱 인터페이스 장치를 설계 및 제작하고, 순발력 재활훈련의 목적으로 가상공간을 시각적으로 보여주는 입체영상 시스템과 연동하여 일부 제한적인 기능을 갖는 가상 테니스 연습 시스템을 구현하였다. 이때 가상 공과 가상 라켓의 간단한 충돌 모델과 햅틱 렌더링을 통하여 가상 공을 칠 때 사용자가 라켓으로 느끼는 충격과 반력을 제작한 3차원 햅틱 인터페이스 장치를 통하여 느낄 수 있도록 하였다. 구현된 시스템의 실험을 통하여 공과 라켓에서 충돌이 일어났을 때의 느낌을 사용자에게 전달할 수 있었으며, 완벽하지는 않지만 공과 라켓의 충돌 후 공의 나가는 방향과 속도가 실제와 유사함을 확인하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.12-12
• /
• 2017

본 연구에서는 롤러식 양파 파종기의 작동 특성 파악을 위한 동적 시뮬레이션을 수행하였다. 롤러식 양파 파종기의 주요부는 롤러와 포트트레이로 구성된다. 양파 파종기의 작동 특성 파악을 위해 동력전달 경로의 구성요소와 각 주요부의 속도를 분석한 결과 동력원인 모터의 출력은 체인과 스프라켓을 통해 포트트레이와 롤러에 전달되며 모터에서의 회전속도는 1770rpm으로 감속기를 통해 출력축의 회전속도는 17.7rpm으로 감소한다. 이론적으로 도출한 포트트레이의 이동속도는 74.98mm/s, 롤러의 회전속도는 22.13rpm으로 나타났다. 시뮬레이션을 수행하기 위해 스캐너를 이용하여 롤러식 파종기를 실측했으며 후에 3D모델링을 진행하였다. 시뮬레이션 해석조건은 파종기의 실제 작동방식을 고려하여 롤러1과 3은 포트트레이와 면대면 접촉을 통해 회전하도록 설정하였고 롤러2와 롤러4는 동력전달경로에 포함된 스프라켓과 기어의 잇수비를 반영하여 회전속도를 도출하여 적용하였다. 시뮬레이션 결과 롤러의 회전속도는 모두 22.13rpm으로 수식에 근거하여 도출한 값과 계측 값이 같음을 확인하였다. 또한 파종 깊이를 결정하는 요소인 롤러의 상토 압축 정도를 파악하기 위하여 롤러궤적 시뮬레이션을 통해 롤러 끝 단의 궤적을 분석하였는데 롤러궤적 분석 결과 롤러의 끝 단은 약 9.8mm 깊이로 내려가는 것을 확인하였다.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.373-380
• /
• 2015

This study which was conducted on male tennis player on one hand(OH) & two hand(TH) backhand stroke and how both motion differed on low extremity movement with each feature analyzed in detail, the result as follow. The motion of TH based on resultant velocity, appeared to be a higher than OH, which was important variable in determining the ball speed. Contrary to TH where the player minimized the motion in the lower body and finalized a stroke through the turn of the trunk as if sticking the ball closed to the body, OH was carried out such that the player appeared to chase the ball. Whereas in OH, the knee joint extension moment was not found to be larger than TH, the opposite result came out for abduction moment and internal rotation moment. In the case of hip joint, consisted of extension, abduction and internal rotation moment, the outcome emerged to be greater for TH with conspicuous difference in abduction moment. Flection moment for TH overwhelmed in TH though both adduction and external rotation moment brought about similar outcome for both strokes.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.91-107
• /
• 2002

This research got the following conclusion as result that analyzed high clear action kinematically to 4 C girls' junior high school badminton players who are situated in Chungchong-bukdo. 1. Most of the subject didn't rotate their right shoulder and elbow joint at back swing and moved speedy to shuttle cock. And an cooperation action of joint decreases displaying only a good action on both subject`s specification joint part. 2. When the subject S1 and S2 swing slowly and largely the joint of shoulder and elbow and then the speed of right wrist and racket head is fast, the cooperation action of joint is better than other subject. 3. An angle change of right shoulder showed angle that all subjects are great being caused in softness of joint and angular velocity was exposed that load enough Impact force and increase the speed of racket head as angular velocity decreases rapidly in Impact except subject S3. 4. All subjects of right elbow angle change showed similar form and was exposed that subject S2 sees form of impact stage serious bends from back swing and do not use force effectively in angular velocity. 5. Angle of right wrist appeared that the speed of shuttle cock is decelerated because fast bends of wrist is not formed shortly after Impact because all subject do not accomplish big angle shortly after back swing. Angular velocity can assume that the subject S1 and S4 are using and move fast strong snap shot offering angular velocity value of Impact stage sound (-). 6. While size of Impact stage knee angle accomplishes angle that is big both subject, hip joint angles sees small angle and is playing swing that do on upper body and arm without using strong waist force that is composition action with knee and hip joint.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.53-60
• /
• 2007

Recently tennis techniques has been changed in stance patterns. Stance is consist of square stance, open stance and semi-open stance. The purpose of this study was to analyze the kinematics variables of racket head velocity during forehand stroke by stance patterns. Eight high school tennis players were chosen for the study who use semi western grip right-handed person more than career 7 years. They performed horizontal swing and vertical swing that it was done each five consecutive trial in the condition of square, open and semi-open stance. The results showed that racket head velocity significant difference was not observed in stance types between swings at impact. Y and Z components of racket head velocity for horizontal and vertical swing at second prior to impact and at impact were that y components velocity was faster horizontal swing than vertical swing and z components velocity was later horizontal swing than vertical swing. Statistically significant variable to racket head velocity and Pearson's correlation were drawn as follows. 1. Z components of racket head velocity in square stance was significant correlation by right knee joint. 2. Y components of racket head velocity in semiopen stance was significant correlation by left hip joint. 3. Y components of racket head velocity in open stance was significant correlation by left ankle joint.