• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.8-16
• /
• 1999

In this paper, the performance of a hybrid DS/SFH-SS(direct-sequence/slow-frequency-hopped spread-spectrum) system with coherent BPSK modulation over Nakagami fading channel in the presence of multiple tone jamming is analyzed. Because the Nakagami m-distribution can describe not only Rayleigh fading but also more general fluctuations involving a specular component by adjusting the value of the fading index m. It is known that for m=1 corresponds to Rayleigh fading, for $1/2{\le}m{\le}1$ corresponds to the worst case fading condition, for m>1 corresponds to Rician fading, and for $m{\to}{\infty}$ corresponds to the nonfading condition. The bit error probability is derived over Nakagami model and numerical evaluations are presented for some combinations of system parameters. The results show that as m increases, the bit error probability is better. Also, at a low JSR(jamming-to-signal power ratio), a pure DS-SS system can achieve lower bit error probability than a hybrid DS/SFH-SS system. But at a high JSR, a hybrid DS/SFH-SS system is shown to be superior to a pure DS-SS system. Therefore, it is demonstrated that without increasing the total system bandwidth, the performance of a hybrid DS/SFH-SS is superior to that of a pure DS-SS system in the presence of multiple tone jamming.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.37-47
• /
• 2016

The practical constraints on the commercial FPGAs which contain dedicated wide function multiplexers in their slice structure are incorporated with one of the most advanced FPGA mapping algorithms based on the AIG (And-Inverter Graph), one of the best logic representations in academia. As the first step of the mapping process, cuts are enumerated as intermediate structures. And then, the cuts which can be mapped to the multiplexers are recognized. Without any increased complexity, the delay and area of multiplexers as well as LUTs are calculated after checking the requirements for the tree construction such as symmetry and depth limit against dynamically changing mapping of neighboring nodes. Besides, the root positions of multiplexer trees are identified from the RTL code, and annotated to the AIG as AOs (Auxiliary Outputs). A new AIG embedding the multiplexer tree structures which are intentionally synthesized by Shannon expansion at the AOs, is overlapped with the optimized AIG. The lossless synthesis technique which employs FRAIG (Functionally Reduced AIG) is applied to this approach. The proposed approach and techniques are validated by implementing and applying them to two RISC processor examples, which yielded 13~30% area reduction, and up to 32% delay reduction. The research will be extended to take into account the constraints on the dedicated hardware for carry chains.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.15-25
• /
• 2012

The research on the FPGA CAD tools in academia has been lacking practicality due to the underlying FPGA fabric architecture which is too simple and inefficient to be applied for commercial FPGAs. Recently, the database of placement positions and routing graphs on commercial FPGA architectures has been built, and provided for enabling the academic development of placement and routing tools. To extend the limit of academic CAD tools even further, we have developed the evaluation toolkit for the K-FPGA architecture which is under development. By providing interface for exchanging data with a commercial FPGA toolkit at every step of mapping, packing, placement and routing in the tool chain, the toolkit enables individual tools to be developed without waiting for the results of the preceding step, and with no dependency on the quality of the results, and compared in detail with commercial tools at any step. Also, the fabric primitive library is developed by extracting the prototype from a reporting file of a commercial FPGA, restructuring it, and modeling the behavior of basic gates. This library can be used as the benchmarking target, and a reference design for new FPGA architectures. Since the architecture is described in a standard HDL which is familiar with hardware designers, and read in the tools rather than hard coded, the tools are "data-driven", and tolerable with the architectural changes due to the design space exploration. The experiments confirm that the developed library is correct, and the functional correctness of applications implemented on the FPGA fabric can be validated by simulation. The placement and routing tools are under development. The completion of the toolkit will enable the development of practical FPGA architectures which, in return, will synergically animate the research on optimization CAD tools.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.37-47
• /
• 2011

Real picture like high quality computer graphic is widely used in various fields and shader processor, a key part of a graphic processor, has been advanced to programmable unified shader. However, The existing graphic processors have been optimized to commercial algorithms, so development of an algorithm which is not based on it requires an independent shader processor. In this paper, we have designed and implemented a control unit to support high quality 3 dimensional computer graphic image on programmable integrated shader processor. We have done evaluation through functional level simulation of designed control unit. Hardware resource usage rate are measured by implementing directly on FPGA Virtex-4 and execution speed are verified by applying ASIC library. the result of an evaluation shows that the control unit has the commands more about 1.5 times compared to the other shader processors that is a behavior similar to the control unit and with a number of processing units used in a shader processor, compared with the other processors, overall performance of the control unit is improved about 3.1 GFLOPS.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.129-136
• /
• 2004

Titanium and [titanium+Na(K)] substituted 11${\AA}$ tobermorites solids synthesized under hydrothermal conditions at 180$^{\circ}C$ exhibit cation exchange properties toward heavy transition metal cations, such as Fe$^{2+},\;Zn^{2+},\;Cd^{2+}\;and/or\;Pb^{2+}$. The amount of heavy metal cations taken up by these solids was found in the order: Fe$^{2+}>Zn^{2+}>Cd^{2+}>Pb^{2+}$, and reached maximum at 10% [Ti+K]-substituted tobermorite. The total cation exchange capacity of the 10% Ti+Na (K) - substituted tobermorites synthesized here range from 71 to 89 meq/100 g, and 50-56 meq/100g for Ti-substituted only. Results indicated that 10% [Ti+K] substitution exhibit cation exchange capacity more 2.4 times than the unsubstituted-tobermorite. This is due to the increase of the number of active sites on the exchangers. The incorporation of Ti and/or [Ti+Na(K)] in the lattice structure of synthesized tobermorites is due to exchange of Ti$^{4+}{\Leftrightarrow}2Ca^{2+}\;and/or\;Ti^{4+}+2Na^+(K^+){\Leftrightarrow}3Ca^{2+}$, respectively. The mechanism of Ti and [Ti+Na(K)] incorporations in the crystal lattice of the solids during synthesis and the heavy metal cations uptaken by these solids is studied.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.131-143
• /
• 2011

Previous alerting service based on LBS was caused severe overload problem of server by using the method to confirm the location of each moving object on server. In this paper, by loading an App on smart moving object, we proposed a novel algorithm named ADAS(Active Disaster Alert Service) for accessing to the server site with oneself location information as needed and implemented the disaster alerting service system with visualization for user. In the proposed method, running App access to the server periodically with the present location coordinate gained from GPS module or network module and the ID of moving object. Then, the server compare the present location coordinate of moving object and the coordinates of disasters registered in DIDB and transmit the n NDIs existed in near distance orderly from the coordinate of present moving object to the client. The App compares the coordinate of present location for moving object and the coordinates of NDI is transmitted from server by real time and executes the service with classifying levels of alert into three steps such as danger, carefulness and safety. And new NDIs are gained by accessing DIDB on Server periodically during running App. Therefore, this will be become a novel method for reducing fundamentally the server overload problem in comparison with previous alerting service that the career of moving object is managed on server.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.87-95
• /
• 2011

Recently, as smartphones have rapidly come into wide use and various social networking services have grown, people perform a variety of interactions through the virtual and real world based on them. Usually, such services focus on easy formation of social links among users, supporting the exchange of simple messages among users on the networks. Twitter, one of such services used worldwide, supports short message service named Tweet and has over 200 million members signed up. n this paper, we propose techniques for supporting real-time group messaging based on the social network of Twitter and describe a smartphone group messaging system developed with the techniques. The system automatically forms a group that include a Twitter user and the followers of the user, supporting real-time group messaging among the group members. The developed system is composed of an XMPP protocol-based messaging server and smartphone client applications which perform real-time messaging based on the social network of Twitter. Twitter users can easily use the system utilizing Tweet messages, exchanging real-time messages with their followers within the groups instantly established on the XMPP server.

• Journal of Korea Port Economic Association
• /
• v.36 no.1
• /
• pp.129-140
• /
• 2020

In the future, the global container handling market will be reorganized into larger ships and shipping alliances, and the bargaining power of shipping companies will be further strengthened. Therefore, the global terminal operator (GTO), which has a global network, vast experience, and operational know-how, is expected to strengthen its competitiveness. In Korea, the central government promoted the development of GTOs in the mid-2000s, but it failed, mainly due to disagreements between port stakeholders. In this study, the macroeconomic indicators that have the same effect in all regions were used to analyze GTO management performance. In the short term, it could be used to establish the business strategy of domestic terminal operators based on changes in macroeconomic indicators. In the long term, it would be used to establish a promotion strategy for GTOs in Korea. The results of analyzing the impact of macroeconomic indicators on the GTO's profit show that the GTO's profit is significantly affected by cargo handling capacity, the consumer price index of the United States, the Shanghai Composite Index, the Crude Oil Price, and the London Inter-bank Offered Rate (LIBOR). However, the scale of impact was not significantly different between public and private GTOs.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.331-335
• /
• 2006

This experiment was conducted to investigate the effect of deep sea water on fruit quality and yield of tomato. In the deep sea water treatments, fruit growth and weight were decreased as the concentration of deep sea water increased. Especially, the fresh weight of second truss was decreased significantly than first truss. Soluble solid content was increased significantly in higher concentration treatment especially at 30mM and 40mM treatment. That was increased more in the first than in the second truss fruits. Most of hexose in fruits were glucose and fructose. The reason of increased glucose and fructose contents was the decline of growth because of salinity stress by deep sea water treatment. however deep sea water treatment increased the lycopene content, especially in 20mM treatment. It is assumed that deep sea water treatment cause induction and promotion of ethylene. The higher concentration of deep sea water to the solution, the eater fruit quality improvement was noticed. However, proportional yield reduction accompanied concentration, 20mM deep sea water improved fruit quality without a significant yield reduction. The Re content was the highest among ginsenosides in all treatments. The contents total of ginsenosides in all treatments, except EC 8 treatment, was higher than those in the controlled treatment. The PT/PD value was 1.31 of the lowest in the EC 8 treatment and was 2.52 of the highest in the EC6 treatment. Rf contents in high increase was detected at all treated ginseng roots.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.1 s.55
• /
• pp.35-44
• /
• 2006

Recently, encapsulation studies have been tarried out to protect active agents using shell materials such as polymers, lipids, inorganic materials and the other protective materials. We have prepared copolymers of methylmethacrylate (MMA) and trimethoxysilylpropylmethacrylate (TMPMA), and the copolymers as shell materials were used for encapsulating active agents. Poly(MMA-co-TMPMA) spheres were very efficient for encapsulating active agents such as vitamin derivatives (such as retinol, retinyl palmitate, tocopheryl acetate and ascorbyl tetraisopalmitate) and oil soluble licorice extract etc. Mean diameters of poly(MMA-co-TMPMA) core-shell spheres containing active agents varied between about 0.1 to $10{\mu}m$ according to the experimental conditions. The loading amount of encapsulating active agents was 15 to 25% (w/w) and the loading yield was above 90%. The stability of active agents in poly(MMA-co-TMPMA) core-shell spheres prepared with an UV absorbing precursor increased by 25% compared with that of active agents in spheres prepared without an UV absorbing precursor.