• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.534-542
• /
• 2015

Round trip activity occurs discretely due to the abrasion of drill bit in the deep drilling project. Round trip has great impact on the drilling performance because it takes more time to change a drill bit as the depth goes deeper. Therefore, a reliable prediction technology of the round trip should be secured for feasibility analysis and effective management of the drilling project. Lee et al. (2013) developed the TOSA (round trip occurrence simulation algorithm) which can analyze the depth and timing of round trip occurrence at each abrasion state of bit. However, TOSA has weakness that it takes long time for simulation because the number of simulation increase exponentially as increasing the number of simulation section. This study developed the TOSA based round trip performance prediction module using genetic algorithm for simulating in a short time and verified simulation results.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.480-492
• /
• 2013

After the introduction of geothermal power generation technology based on engineering reservoir creation that can be applied on non-volcanic region, industrial need for studies on the efficient and economic execution of costly deep-depth drilling work becomes manifest increasingly. However, since it is very difficult to predict duration and cost of boring work with acceptable reliability because of many uncertain events during the execution, efficient and organized work management for drilling is not easily achievable. Especially, the round trip that discretely occurs because of the abrasion of bit takes more time as the depth goes deeper and it has a great impact on the work performance. Therefore, a technology that can simulate the occurrence timing and depth of round trip in advance and therefore optimize them is essentially required. This study divided the abrasion state of bit into eight steps for simulation cases and developed a forecast algorithm, i.e., TOSA which can analyze the depth and timing of round trip occurrence. A methodology that can divide a unit section for simulation has been suggested; while the Bourgoyne and Young model has been used for the forecast of drilling rates and bit abrasion extent by section. Lastly, the designed algorithm has been systemized for the convenience of the user.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.75-85
• /
• 2014

Existing car-sharing systems have difficulty meeting the demands of one-way trips and connecting to other sharing systems. Therefore, in this study, a multi-mobility sharing service management system that was able to meet the demands of the one-way and round-way trips and shared diverse transportation modes such as cars (electric car/gasoline car), electric motorcycles and bicycles was developed, and a field study was conducted in Kashiwa-no-ha, Kashiwa City and Nagareyama City, Chiba Prefecture, Japan. As a result of the field test, it was confirmed that this system supplied the one-way demands for 54.9% of total car trips and 43.9% of the user used multiple transportation modes by the common interface. In addition, this system contributed to reduce carbon dioxide emissions by sharing vehicles and using eco-friendly vehicles. The developed sharing system is expected to improve mobility by meeting more various types of traffic demand than existing car sharing systems.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.1
• /
• pp.33-40
• /
• 2017

In this Paper, Analyse the Steady State Behavior of TCP and TFRC with Packet Error when both TCP and TFRC Flows Co-exist in the Network. First, Model the Network with TCP and TFRC Connections as a Discrete Time System. Second, Calculate Average Round Trip Time of the Packet Between Source and Destination on Packet Loss Environment. Then Derive the Steady State Performance i.e. Throughput of TCP and TFRC, and Average Buffer Size of RED Router Based on the Analytic Network Model. The Throughput of TCP and TFRC Connection Decrease Rapidly with the Growth of Sending Window Size and Their Transmission Rate but Their Declines become Smoothly when the Number of Sending Window Arrives on Threshold Value. The Average Queue Length of RED Router Increases Slowly on Low Transmission Rate but Increases Rapidly on High Transmission Rate.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.529-544
• /
• 2001

Prefetching is an effective method to minimize the number of roundtrips between the client and the server in database management systems. In this paper we propose new notions of the type-level access pattern and the type-level access locality and developed an efficient prefetchin policy based on the notions. The type-level access patterns is a sequence of attributes that are referenced in accessing the objects: the type-level access locality a phenomenon that regular and repetitive type-level access patterns exist. Existing prefetching methods are based on object-level or page-level access patterns, which consist of object0ids of page-ids of the objects accessed. However, the drawback of these methods is that they work only when exactly the same objects or pages are accessed repeatedly. In contrast, even though the same objects are not accessed repeatedly, our technique effectively prefetches objects if the same attributes are referenced repeatedly, i,e of there is type-level access locality. Many navigational applications in Object-Relational Database Management System(ORDBMs) have type-level access locality. Therefore our technique can be employed in ORDBMs to effectively reduce the number of roundtrips thereby significantly enhancing the performance. We have conducted extensive experiments in a prototype ORDBMS to show the effectiveness of our algorithm. Experimental results using the 007 benchmark and a real GIS application show that our technique provides orders of magnitude improvements in the roundtrips and several factors of improvements in overall performance over on-demand fetching and context-based prefetching, which a state-of the art prefetching method. These results indicate that our approach significantly and is a practical method that can be implemented in commercial ORDMSs.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.3 s.303
• /
• pp.1-8
• /
• 2005

At IETF (Internet Engineering Task Force), recently RFC3775, RFC3776 documents about the mobile IPv6 were standardized by IETF (Internet Engineering Task Force). Those specifications propose that during the roaming, the mobile node sends securely the binding update to the home agent and the correspondent node after setting the security association between Mobile Node and Home Agent. But there is no secure bootstrapping method between a mobile node and a home agent at the two RFC documents. This paper proposed a method for the secure bootstrapping between a mobile node and a home agent. This makes the authentication, binding update, home agent assignment, security association distribution through the AAA-based secure channel between mobile node and home agent. And the proposed method was analyzed in the view of the procedure, round trip and security strength.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.9
• /
• pp.349-354
• /
• 2019

s programming education becomes more important in recent years, it is necessary to learn how the source code written by students reflects Object-Oriented(OO) concepts. We present a tool called the Round-Trip Translator(RTT) that transforms the Unified Modeling Language(UML) class diagram and Java source code to provide a web-based environment that provides real-time synchronization of UML and source code. RTT was created by improving existing RTE and is a tool for students who are learning OO concepts to understand how their UML or source code reflects the concepts that user intended. This study compares the efficiency and user- friendliness of RTT with the existing Round-Trip Engineering-based tools. The results show that students have improved understanding of OO concepts through UML and source code translation by using the RTT. We also found out that students were satisfied with the use of the RTT, which provides more efficient and convenient user interface than the existing tools.

• Journal of KIISE:Software and Applications
• /
• v.35 no.3
• /
• pp.197-206
• /
• 2008

In the mobile Internet environment, frequent communications between a mobile device and a content server are required for searching or downloading learning materials. In this paper, we propose an efficient prefetching technique to reduce the network cost and to improve the communication efficiency in the mobile dictionary. Our prefetching-based approach can be explained as follows. First, we propose an overall framework for the prefetching-based mobile dictionary. Second, we present a systematic way of determining the amount of prefetching data for each of packet-based and flat-rate billing cases. Third, by focusing on the English-Korean mobile dictionary for middle or high school students, we propose an intuitive method of determining the words to be prefetched in advance. Fourth, based on these determination methods, we propose an efficient prefetching algorithm. Fifth, through experiments, we show the superiority of our prefetching-based method. From this approach, we can summarize major contributions as follows. First, to our best knowledge, this is the first attempt to exploit prefetching techniques in mobile applications. Second, we propose a systematic way of applying prefetching techniques to a mobile dictionary. Third, using prefetching techniques we improve the overall performance of a network-based mobile dictionary. Experimental results show that, compared with the traditional on-demand approach, our prefetching based approach improves the average performance by $9.8%{\sim}33.2%$. These results indicate that our framework can be widely used not only in the mobile dictionary but also in other mobile Internet applications that require the prefetching technique.

• Journal of Internet of Things and Convergence
• /
• v.1 no.1
• /
• pp.1-4
• /
• 2015

This paper aims to present the mathematical model to find the mean web object transfer latency in the slow-start phase of TCP congestion control mechanism, which is one of the main control techniques of Internet. Mean latency is an important service quality measure of end-user in the network. The application area of the proposed latency model is the narrowband environment including multi-hop wireless network and Internet of Things(IoT), where packet loss occurs in the slow-start phase only due to small window. The model finds the latency considering initial window size and the packet loss rate. Our model shows that for a given packet loss rate, round trip time and initial window size mainly affect the mean web object transfer latency. The proposed model can be applied to estimate the mean response time that end user requires in the IoT service applications.