• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.723-729
• /
• 1994

We have investigated on the photoreflectance(PR) of heavily Si-doped n-GaAs. The PR response was found to be dependent of modulation beam intensity, modulation frequency, and temperature. From the observed Franz-Keldysh oscillation(FKO), we determined the band gap energy and surface electric field. As the temperature is decreased from room temperature to 77K, the band gap energy increases while the surface electric field decreases. The quality of crystal was greatly increased after thermal annealing for 5 min at $500^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.51 no.3
• /
• pp.265-269
• /
• 2007

A comparative study on crystal structures and UV-visible diffuse reflectance spectra for Nb-containing oxyfluorides was performed to probe the relationship between energy band gap and local structure. The oxyfluorides, RbSrNb2O6F, RbCaNb2O6F and RbNb2O5F are commonly composed of the corner-sharing NbO5F octahedra as structural building units. The average Nb-O(F)-Nb bond angles, which can be a measure of the structural distortion, are 158.6° for RbSrNb2O6F, 149.6° for RbCaNb2O6F and 139.5° for RbNb2O5F. As the bond angle decreases, the band gap increases: 3.48eV for RbSrNb2O6F, 3.75eV for RbCaNb2O6F and 4.03 eV for RbNb2O5F. This experimental result implies that the band gap can be controlled with a range of 0.6 eV through a variation of local structure for the Nb-containing oxyfluorides.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.97-103
• /
• 1999

Zinc sulfide is a ll-VI compound with a large direct band gap in the near-UV region and a promising material for blur-light emitting diode and laser diode. It was identified that the structure had zinc blonde structure through the analysis of X-ray diffraction patterns. It's lattice constant was measured to be $a_o=5.411{\AA}$. The optical absorption, photocurrent, and photoluminescence spectra were measured to investigate the optical properties of zinc sulfide single crystal. The optical energy band gap measured at room temperature was 3.61eV The energy band gap of zinc sulfide annealed in zinc vapor at $800^{\circ}C$ was lower 0.1eV than that of as-grown zinc sulfide through the analysis of the photocurrent spectra. The photoluminescence spectra were measured ranging from 30K to 293K for the two cases of as-grown and annealed zinc sulfide. As-grown ZnS single crystal had peaks at 350nm, 392nm, 465nm, and annealed zinc sulfide had peaks at 349nm.

• Journal of the Korean Vacuum Society
• /
• v.3 no.1
• /
• pp.33-38
• /
• 1994

-Hot-wall epitaxy 방법에 의하여 GaAs(100) 기판위에 CdTe(100)박막을 성장하였다. 박막을 성 장하는 동안 기판의 온도는 28$0^{\circ}C$ 증발원의 온도는 $430^{\circ}C$로 유지하였고 성장률은 $2mu$m/h이었다. 박막의 두께가 증가함에 따라 격자상수와 2결정 X-선 요동곡선의 반폭치가 감소하였다. CdTe (100) 박막의 광 전류 스펙트럼으로부터 에너지 띠간격의 광전류 봉우리는 가전자대 8 에 있는 전자가 광흡수에 의해 전도대 6 전이한 것이며 에너지 띠간격의 온도의존성을 구한 결과 온도계수 a=-2.3~-3.5 x 10-4 ev/k.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.560-564
• /
• 2009

ZnO and Mn-substituted $Zn_{0.95}Mn_{0.05}O$ were synthesized by using precipitation method. $Zn_{0.95}Mn_{0.05}O$ compound absorbed UV light as well as hole range of visible light ($400{\sim}800$ nm). Results obtained revealed that $Zn_{0.95}Mn_{0.05}O$ showed higher activity than P-25 for visible-photocatalytic degradation of 1,4- dichlorobenzene.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.10-10
• /
• 2004

유전율이 서로 다른 물질을 나노 크기로 주기적으로 배열하여 황자 띠간격(Photonic bandgap)을 이루게 하는 광결정(Photonic crystal)에 인위적인 결함을 부가하여 광파워 분배 및 Mux/Demux 등 광회로 기능 수행을 할 수 있도록 집적화한 광도파로 소자가 미래형 정보통신사회를 위한 초고집적화, 초고속화, 저전력 및 신기능 등의 특성을 위하여 요구된다. 이러한 나노 광결정 소자는 다양한 방법으로 제작이 시도되고 있는데, 나노 임프린트 기술은 실장밀도가 높으며, 수십 나노급의 패턴이 주기적으로 배열된 구조물의 성형에 큰 장점이 있어서 본 연구에서 다루어졌다.(중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.510-513
• /
• 2002

띠모양의 에미터와 에미터와 정렬된 띠모양의 케이트 구멍을 가진 탄소나노튜브(CNT) 삼극 구조에 대하여 전계방출 시뮬레이션을 수행하였다. 전자방출은 주로 가장자리에서 발생하였으며 에미터와 게이트사이의 간격이 가까워지면 급격히 증가하였다. 전자방출 특성도 상당히 우수하였다. 한쪽 가장자리만을 사용한 삼극구조의 경우에는 방출된 전자의 궤적이 좁은 띠모양으로 형성되어 방향성이 매우 우수하게 나타났다. 띠모양의 에미터 및 게이트로 이어진 삼극구조는 제작이 용이하고 조립할 때 정렬이 쉬운 장점이 있다.

• Journal of the Korean Vacuum Society
• /
• v.19 no.5
• /
• pp.353-359
• /
• 2010

We report the surface photovoltage (SPV) properties of $In_{0.49}Ga_{0.51}P$/GaAs heterostructure grown by metal-organic chemical vapour deposition (MOCVD). The SPV measurements were studied as a function of modulation beam intensity, modulation frequency and temperature. From a line shape analysis of room temperature derivative surface photovoltage (DSPV) spectrum, the band gap energies for GaAs and $In_{0.49}Ga_{0.51}P$ transitions were 1.400 and 1.893 eV respectively. The surface photovoltage (SPV) increases with increasing the light intensity and temperature, whereas the SPV decreases with increasing the modulation frequency. From the temperature variation of the energy gaps, we have analysis by both Varshni and Bose-Einstein type expressions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.225-235
• /
• 2005

The stability of innovative prestressed wale system applied in urban excavation was investigated. The IPS is a wale system prestressed by tension of steel wires. The IPS consists of steel wires, H-beam support and wale. The IPS provides a high flexural stiffness to resist the bending moment caused by earth pressures. And the IPS transmits earth pressures due to excavation to corner struts. The IPS provides a larger spacing of support, economical benefit, construction easiness, good performance and safety control. This paper explains basic concept and mechanism of the IPS and presents the measured performances of the IPS applied in urban excavation. In order to investigate applicability and stability of the IPS in urban excavation, observations and measurements in site were performed. The IPS applied in urban excavation was performed successfully. The results of the field instrumentation were presented. The measured performances of the IPS were investigated. And behavior of the wall and corner struts was investigated.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.3
• /
• pp.39-48
• /
• 2010

Improved seismic performances of RC bridges can be attained by sufficient ductilities of piers, which can be obtained by providing sufficient lateral confinements to the plastic hinge regions of piers. The cross sectional shape and the amount of lateral reinforcements are key parameters in the determination of effective confinements. Even though identical amounts of lateral reinforcement are provided, the effective confinement differs due to different spacing, arrangements, hook details and so on. Unlike circular sections in which confinement is exerted by mere hoop reinforcements, cross-ties are arranged in square or rectangular sections to enhance the effective confinements. The stress-strain relationship of confined concrete is varied by how to consider these cross-ties. In this study, the stress-strain relationships of confined concrete with cross-ties are investigated experimentally and their mechanical characteristics are estimated by comparison with other empirical equations.