• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.49-54
• /
• 2007

As digital contents based on 3D graphics are increased, the requirement for low power 3D graphic hardware for mobile devices is increased. We design a transformation engine for mobile 3D graphic processor. We propose a simplified transformation engine for mobile 3D graphic processor. The area of the transformation engine is reduced by merging a mapping transformation unit into a projective transformation unit and by replacing a clipping unit with a selection unit. It consists of a viewing transformation unit a projective transformation unit a divide by w nit, and a selection unit. It can process 32 bit floating point format of the IEEE-754 standard or a reduced 24 bit floating point format. It has a pipelined architecture so that a vertex is processed every 4 cycles except for the initial latency. The RTL code is verified using an FPGA.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2004.10a
• /
• pp.14-17
• /
• 2004

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.108-114
• /
• 2008

The aim of this analysis is to verify the electrical compatibility of the interfaces which exist between TWTA(Travelling Wave Tube Amplifier) which is equipment of the Ka-band payload in COMS (Communication, Ocean and Meteorological Satellite) and external equipments. For each interface, this study checked the compatibility between equipments for the power links, commands, digital telemetry, analog telemetry, and failure condition or AIT(Assembly, Integration and Test) errors. In addition with this interface compatibility verification, this study outputs electrical and manufacturing recommendations to be applied at harness level.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.270-271
• /
• 2008

고품질, 고기능 오디오에 대한 대중적인 수요가 증대되고 있는데, 이는 첫째로 레코딩 기술의 발달, 둘째로 저장매체와 발달과 코딩기술의 발달에 의한 오디오 저장 데이터 량의 증가, 또한 디지털 출력회로에 의해 가능해진 저렴한 고음질 오디오 출력장치에 그 원인이 있다고 할 수 있다. 더구나, 발달된 디지털 신호처리 기술로 각종 필터의 구현, 음장제어, 3차원 사운드 효과 등이 가능해져서 시장에서의 수요를 견인하는 새로운 오디오 장치의 개발이 필요한 상황이다. 이러한 요구에 부응하여 디지털 음원들을 입력받아 임의의 필터링을 실행하고, 출력 유닛의 공간적, 음향적 특성을 상위제어기로부터 입력받아 전 신호경로 상에 디지털 신호처리 하여 출력신호를 생성하는 장치가 요구된다. 이는 단순히 청취만 가능했던 기존의 수동적이고 일방적인 오디오 서비스와 달리 청취자가 자신의 취향에 따라 음악을 들을 수 있는 능동적인 오디오 서비스가 가능해졌다.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.103-108
• /
• 2007

Eurostar 3000 AOCS is optimized for telecommunication mission with no strong requirement on attitude stability and has therefore to be upgraded to comply with COMS high stability requirements for the optical observations. This COMS configuration constraint induces specificities for the wheel. The aim of this analysis is to verify the electrical compatibility of the interfaces which exist between COMS wheels and external equipments. For each interface, this study checked the compatibility between equipments for the power links, commands, digital telemetry, analog telemetry, and failure condition or AIT errors. In addition with this interface compatibility verification, this study outputs electrical and manufacturing recommendations to be applied at harness level.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.59-71
• /
• 2019

The distribution logistics center has its own inventory, so designing an efficient storage area is very important. The purpose of this study is to present the optimal storage area calculation method for distribution logistics center considering the use of standard pallet unit load, and the results of this study are as follows. First, standard rack modules for storing T-11 and T-12 type pallet, which is generally used in Korea, were defined. Second, a variety of pallet transport equipments were investigated and analyzed to define the standard transport equipment's work passageway by type. Finally, it has great implications in terms of suggesting measures to minimize unused space that may occur during placement of pallet rack modules within storage space, as well as the easy and optimal calculation of the storage area for the distribution logistics center. Future research require a study on the layout of the entire distribution logistics center, which reflects the latest logistics technologies, such as standard rack modules for Mini-Load and GTP picking system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.266-269
• /
• 2010

급속한 정보 통신 기술의 발달로 인해 멀티미디어 재생 개발 기술들은 단순히 수동적으로 보고 듣는 재생 기술에서 벗어나 청취자 감성, 취향 등에 따라 보다 실감 있고 사용자가 능동적으로 재생할 수 있는 기술로 진화 하고 있다. 지금까지의 오디오 서비스는 음원 개발자 중심의 오디오 서비스, 즉 보컬 및 모든 악기가 믹스된 단일음원이기 때문에 사용자는 단순히 오디오 음원 개발자나 음반 제작사가 발매한 단일 음원을 일방적으로 수동적 청취할 수밖에 없다. 하지만 사용자 능동형 오디오 서비스에서는 사용자가 능동적으로 자신이 원하는 음악적 취향에 따라 능동적으로 각각의 객체 기반의 독립 음원을 선택, 감성에 따른 음원 효과 추가, 최적의 음원 청취 위치(Sweet Spot) 변경, 음원 및 스피커 재생 공간 및 위치 변경 재생 등을 할 수가 있다. 본 논문에서는 디지털 음원들을 입력받아 임의의 필터링을 실행하고, 사용자 음원 보정 정보, 출력 유닛의 공간적, 음향적 특성을 상위제어기로부터 입력받아 전신호경로 상에 디지털 신호처리 하여 출력신호를 생성하는 DSP 시스템 플랫폼 및 알고리즘에 관하여 소개한다.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.341-346
• /
• 2007

The purpose of this paper is to propose the design of VADSM(Value-Added Digital Speaker Module) which tunes up the speaker unit by measuring the speaker's frequency responses and controlling EQ band. This module can reduce audible distortions at particular frequency band and improve some flatness in the speaker's frequency response. VADSM is composed of DSP AMP and speaker unit. When a speaker transforms electrical signal to sound, the magnitude response at some frequencies are more or less than normal level. So, DSP AMP can be used to adjust those magnitudes up or down by controlling its EQ bands.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1451-1456
• /
• 2017

In this research we discuss an integrated actuator-control system for advanced control of a smart Shape Memory Alloy (SMA) actuator. Toward this goal, we designed and fabricated an actuator-control module combining two SMA actuating units with a single-chip microprocessor, two different sensing elements, and an actuator driver. In our proposed system, sensing elements include a 6-axis single-chip motion sensor for orientation measurement and a circuit for resistance measurement of SMA wires. We experimentally verified our proposed actuator-control system using actuator driving, sensor data readings, and communication tests.