• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1936-1940
• /
• 2010

본 연구에서는 갑작스런 호우로 인한 다목적댐 저수지 수위의 급격한 상승에도 유기적으로 대응할 수 있도록 우리나라 기후 맞춤형 수위연동 장치를 고안하였다. 현재 기본적인 제작은 완료되었으며, 수위변동으로 인한 장치의 인장 및 수축 시 균등한 측정간격을 유지할 수 있는 연동 기능의 확인 및 검증을 위한 현장 실험을 수행하고 있다. 실험결과는 2010 년 1월 1일부터 약 41일간의 수심별 수온 및 수위변화에 따른 장치의 연동특성에 나타내었다. 각 수온 자료의 측정수심은 앵커에 설치한 수위계를 이용하여 확보하였으며, 또한 각 수심별로 설치한 수위계를 이용하여 취득된 수온의 측정 위치를 확인하였다. 본 장치는 현재 약 60 m의 최대 수심을 고려하였으며, 저수지 수위변동 시 수표 면으로부터 동일 수심에서의 수온모니터링 및 부력재를 이용한 수위변동 시 등간격 연동 측정이 가능하다. 또한 향후 4 대강 및 저수지에서의 수위변화에 연동한 수온 조사 뿐 만 아니라 유속, 탁도 및 염분 등 수리특성 조사 업무까지 활용범위 확대가 가능하다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1979-1990
• /
• 2009

This study suggests apparel sizing systems for obese women in their twenties to fifties. Size Korea body measurement data were used for sampling the obese subjects by obesity judgment indices. A total of 7 obesity judgment indices frequently used in the clothing field were inspected and the measurement data of 499 females defined as "obese" by over 5 obesity judgment indices were analyzed. The results of the study were as follows: A total of 2,212 female body measurement data for the Size Korea Project were collected. These were compared with the 499 data of the obese women in the study. Except for all heights and some lengths correlating with heights, the measurements of obese women were larger than the entire group of females. Bust girth, hip girth, and height were selected as control dimensions of the outerwear covering the upper body; waist girth and hip girth were selected as control dimensions of the outerwear covering the lower body. In each crosstabulation table, 3cm pitches and 5cm pitches by bust girth, waist girth, and hip girth were compared in the aspects of coverage and coverage efficiency. Finally, sizing charts for outerwear covering the upper body and the lower body of obese women were established in the study through the comparison of the coverage and the coverage efficiency. These Size charts were given by 5cm pitches as final sizing systems. Size number of outerwear covering the upper body was 10 and size number of outerwear covering the lower body was 9. In addition, the body measurements of control dimensions and referable dimensions for making garments are given.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.383-389
• /
• 2016

Kissing of sub-conductors due to magnetic forces has been investigated in a 154 kV bundled overhead transmission line. With increasing ampacity of the conductors and enlarging the distance between spacers, lager magnetic force was measured. When the phase ampacity was 2,000 amps and the distance between two adjacent spacers was 68 m, for instance, the conductors became unstable and vibrated with a frequency of several herts. Furthermore, when the ampacity was 2,250 amps and the distance between spacers was 136 m, the two sub-conductors were contacted. Analysing the magnetic forces with distance of spacers, the safe distance of spacers to avoid contact of sub-conductors was presented. The change of the safe distance is discussed due to various parameters, such as residual stresses and wind pressures, in the real transmission lines.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.571-578
• /
• 2002

In temporal database, extended time dimension for history management brings about complexity of join operation and increased cost. To solve this problem, a method that joins the divided segment time data after partition the time range into fixed time interval is introduced. But existing methods can't solve the ambiguity problem of time border that caused by temporal granularity in the partition point. In this paper, We suggested Fuzzy Minimum Interval Partition (FMIP) method that introduced the possibility distribution of fuzzy theory considered uncertainty time interval border in the partition line.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.53-58
• /
• 2008

This study presented a design model optimizing a distance of inlet with drainage pipe laid under the gutter in road. When the distance of inlet changed, a basin for the gutter divided by the distance of inlet and the inflow coming into the gutter would be changed. In this case, the change of inlet distance causes the change of a diameter of drainage pipe and slope because of the change of capacity. Therefore, the optimization is needed to design the combination of them for the distance of inlet. Genetic Algorithm is used to determine the optimal combination of them. The conditions of road and the precipitation were assumed like a real and the range of inlet distance adopted $10{\sim}30\;m$ which has been introduced in domestic. This model presented the optimal distance of inlet and the combination of pipe and slope through the minimum cost. The result of the study is that the optimal distance of inlet is different from each slope of road and it can reduce about 20% of total cost for the distance of inlet.

• KCID journal
• /
• v.6 no.1
• /
• pp.81-87
• /
• 1999

등간격으로 된 여러 개의 유출구와 말단의 배출이 있는 관수로에서 G 인자를 유도하였다. G인자는 관수로의 유출구 수에 따라 사용되는 마찰공식의 함수이며, 관의 입구에서부터 첫 번째 유출구까지의 거리가 유출구 사이의 간격과 같을 때 직접 수두손실의 계산에 사용될 수 있다. 그러나 관수로 하류 말단부에 배출량이 없을 때에는 G 인자는 잘 알려진 Christiansen의 F인자가 되며, G 인자는 여러 개의 유출구를 가진 관수로의 구간별 설계를 가능하게 한다

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.12-16
• /
• 2001

To analyze the performance of array shape estimation techniques using auxiliary sensors, the appropriate number and the positions of auxiliary sensors are investigated. Also, a post-processing technique based on spline interpolation is proposed to improve the performance of array shape estimation. The simulation results showed that when auxiliary sensors are arranged uniformly, the performance of shape estimation is better than other arrangements of auxiliary sensors. Also, the proposed post-processing technique improved the performance of the existing shape estimation method, such as Kalman filter method.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.794-801
• /
• 2000

The effect of chain length and packing density of intercalated surfactants, annealing temperature, and annealing time on static melt intercalation of thermoplastic polymers was examined using x-ray and FTIR spectroscopy. Although melt intercalation of polymers was not successful when alkyl chains in organosilicates form a lateral monolayer structure, the type and structure of surfactants could not much affect final interlayer distances of most polymer/silicate hybrids. As annealing time increases, interlayer distance in organosilicates increases while the dispersity of the spacing between silicate layers decreases. However, the dispersity of interlayer spacing as well as interlayer distance in organosilicates increase with annealing temperature.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.15-21
• /
• 2009

This paper proposes a novel algorithm to assess the abnormal heart beats such as PVC (Premature Ventricular Contraction) and its subsequent RUNs. Our Arrhythmic detection scheme is based on only the R-R Interval features extracted from ECG waveforms and MIT-BIH arrhythmia database is evaluated to validate the efficiency of our algorithm in terms of sensitivity, specificity, FPR(%) and FNR(%).

• Korean Journal of Optics and Photonics
• /
• v.21 no.3
• /
• pp.97-102
• /
• 2010

A pattern density function using simulation analysis for controlling LGP output distribution was proposed. The pattern density function was found as [Pexp(-y/70)+Qexp(+y/25)]R. We analyzed the LGP output distribution of a hemi-sphere pattern using the function and then found that its output distribution was clearly improved as compared with that of the equi-distance pattern. We found that the density function works well for the pyramid pattern case as well as.