• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.136-144
• /
• 2004

From the AC analysis results utilizing a two dimensional device simulator, the ac equivalent-circuit modeling of the ESD protection devices is executed. It is explained that the ac equivalent circuit of the NMOS protection transistor is modeled by a rather complicated form and that, depending on the frequency range, the error can be large if it is modeled by a simple RC serial circuit. It is also shown that the ac equivalent circuit of the thyristor-type pnpn protection device can be modeled by a simple RC serial circuit. Based on the circuit simulations utilizing the extracted equivalent circuits, the effects of the parasitics in the protection device on the characteristics of LNA are examined when the LNA, which is one of the important RF circuits, is equipped with the protection device. It is explained that a large error can result in estimating the circuit characteristics if the NMOS protection transistor is modeled by a simple capacitor. It is also confirmed that the degradation of the LNA characteristics by incorporating the ESD protection device can be reduced a lot by adopting the suggested pnpn device.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.45-54
• /
• 2004

Microwave characteristics of ridge type CPW traveling-wave(TW) electroabsorption modulator and photodetector are affected by the thickness of intrinsic layer, width of guiding layer, and the separation of signal and ground electrodes. These factors are determined effective index of microwave and characteristic impedance due to changing of capacitance(C) and inductance(L) of device. However, conventional equivalent circuit of TW-structure is approximated to microstrip and CPW transmission line by distribution of electric and magnetic fields, respectively. In this paper, we analyzed microwave characteristics of TW-structure and found more accurate value of C and L by using finite difference time domain (FDTD) method. These values are adopted circuit element of equivalent circuit. Microwave characteristics obtained by the FDTD and equivalent circuit model show good agreement.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.47-49
• /
• 1996

The equivalent circuit of LIM is generally composed as the same that of rotary induction motor. However it is very difficult to move the LIM at synchronous velocity for open-secondary circuit test. The resistance representing the core losses in the primary core can not be ignored because the air-gap of LIM is larger than that of rotary induction motor. In this paper, the T-type equivalent circuit of a LIM with the core loss resistance is chosen using static zero slip test and theoritical analysis.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.155-156
• /
• 2017

본 논문에서는 단일 셀과 배터리 팩의 전기적 특성 실험 기반 내부 파라미터를 추출하고 등가회로 모델에 적용하여 시뮬레이션 및 검증을 진행하였다. 본 논문에서는 임의로 선정한 단일 셀에 대한 파라미터를 추출하여 스크리닝이 이상적으로 되었다는 가정 하에 팩 단위로 확장한다. 단일 셀에서 확장된 파라미터와 배터리 팩 자체의 파라미터를 구하여 시뮬레이션 결과를 실제 전압과 비교하여 검증한다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.5
• /
• pp.218-223
• /
• 2005

Impedance matching characteristics of planar type inductively coupled plasma sources are investigated utilizing the previously reported two-dimensional theory[1] of the anomalous skin effect. Two types of matching networks are considered, and the values of the circuit elements are expressed as functions of various reactor parameter. Also, two cases of perfect and imperfect matching conditions are considered and the functional dependence of the values of matching capacitance and reflection coefficient on the various reactor parameters are investigated using the present circuit model.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.54-62
• /
• 2017

This paper presents a design of the Interior Permanent Magnet Synchronous Motor (IPMSM). an initial design process is accomplished by using the parametric design. In the design process, motor characteristics of parameters is computed by the d-q axis equivalent circuit model. Then, an optimal design process is accomplished by combination the experimental design and the response surface method. Finally, the design and analysis results are verified with experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.568-569
• /
• 2005

한빛 자기거울 장치는 고온 플리즈마 물성을 연구하기 위한 장치로서 플러즈마 밀도 형성을 위한 slot 형 안테나 고주파 가열 시스템이 중앙 진공용기에 설치되어 있다. 본 연구에서는 이러한 고주파 전송선로, 임피던스 정합 network. 장치 임피던스를 포함하는 한빛 장치의 고주파 가열 시스템에 대하여 기존에 정립된 고주파 가열 이론[1]을 기반으로 하여 이론적인 해석만으로 구성된 회로모델을 완성하였다. 임피던스 정합 소자 값들은 임피던스 정합 조건으로 결정함으로써 다양한 장치 및 플라즈마 변수들의 함수로 표현하여 그 의존성을 조사하였다.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.72-73
• /
• 2010

연료전지에 출력 저주파 리플전류가 유입될 때, 연료전지 내부에 화학적 특성변화인 Flooding, Drying 및 CO-poisoning이 발생하며 이는 연료전지 노화에 따른 특성변화를 야기한다. 이는 연료전지 노화에 따른 특성분석 및 노화되지 않은 기존 연료전지 시스템 모델의 수정이 불가피함을 나타낸다. 따라서, 본 논문은 연료전지에 연결되는 부하의 출력 저주파 리플전류에 따른 연료전지의 노화에 따른 특성분석 및 차후 진행될 연료전지의 모델링 방향을 간단히 제시하였다. 연료전지의 등가회로 모델 기반 시 저주파 리플전류에 따른 전압-전류 곡선 및 전기화학적 실험결과로 얻어진 노화된 모델 파라미터 값을 연료전지 시스템에 적용하여 노화된 연료전지의 특성분석을 실시하였다. 또한, 노화 전후의 연료전지 등가회로 모델 차이를 간단히 언급하고 차후 진행될 모델링 방향을 제시하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.1-12
• /
• 2003

In this study, a regime where independent treatment of SETs in transient simulations is valid has been identified quantitatively. It is found that as in the steady-state case, each SET can be treated independently even in the transient case when the interconnection capacitance is large enough. However, the value of the load capacitance $C_{L}$of the interconnections for the independent treatment of SETs is approximately 10 times larger than that of the steady state case. A compact SET transient model is developed for transient circuit simulation by SPICE. The developed model is based on a linearized equivalent circuit and the solution of master equation is done by the programming capabilities of the SmartSpice. Exact delineation of several simulation time scales and the physics-based compact model make it possible to accurately simulate hybrid circuits in the time scales down to several tens of pico seconds. The simulation time is also shown to depend on the complexity level of the transient model.l.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1514-1519
• /
• 2003

This paper presents modeling and analysis of static and dynamic characteristics in three phase PWM Boost AC-AC converter used for input voltage sag compensation of custom power. Especially, using circuit DQ transformation technique, an equivalent circuit in fundamental frequency domain is obtained which has all the system characteristics. Moreover, voltage gain and input power factor is analytically induced and linearized state equation at the specific operating point is given. Finally, PSIM simulation results show the validity of the Nosed modelling and analyses.