• Explosives and Blasting
• /
• v.41 no.3
• /
• pp.73-92
• /
• 2023

With the increase of risk of gas explosion, various methods for indirectly estimating the explosion paramaters, which are required for the prediction of gas explosion scale and impact. In this study, the characteristics of the most frequently used methods such as TNT equivalent method, TNO multi-energy method, and BST method and the processes for determining the parameters of the methods were compared. In the case of TNT equivalent method, an adequate selection of the efficiency factor for various conditions such as the type of vapor cloud explosion and explosion material is needed. There is no objective guidelines for the selection of class number in TNO multi-energy method and it is not possible to estimate negative overpressure. It was found that there were some mistakes in the reported parameter values and suggested corrected values. BST method provides more detailed guidelines for the estimation of the explosion parameters including negative overpressure, but the graphs used in this methods are not clear. In order to overcome the problem, the graphs were redrawn. A more convenient estimation of explosion parameters with the numerical expression of the redrawn graphs will be available in the future.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.31-40
• /
• 1998

The purpose of this study is to investigate static elastoplastic behaviour and estimate ultimate resistance capacity of a high-rise apartment shear wall system subjected to a vertical distribution of lateral loading along the height. A typical 25-story two unit plan apartment is selected as a representive model. For the analysis, the pushover analysis is adopted to estimate initial elastic stiffness, post-yielding stiffness and story shear yield resistance level on each story of the structure through three-dimensional nonlinear analysis program-CANNY. In the result of elastoplastic analysis, it is observed that the yield strength of building structures is 1.6 times larger than required lateral design strength.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.6
• /
• pp.500-504
• /
• 2001

The present approach based on the genetic algorithm with improved selections of bonds was adopted to extract a bridged T equivalent circuit elements of $\times10\mu m^2$InGaP/GaAs HBT. the small-signal model parameters were extracted using the genetic algorithm from S-parameters measured at different frequencies under multiple forward-active biases, which demonstrate physically meaningful values and consistency. The agreement between the measured and modeled S-parameters is excellent over the frequency range of 2 to 26.5GHz.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3069-3077
• /
• 1997

This paper is concerned with a new paradigm for parallel evaluation of linear recursion rules which contain transitive dependency in a shared-nothing parallel architecture. For parallel evaluation of rules, we consider a shared-nothing parallel architecture that consists of a set of nodes and a message passing network to these nodes. An evaluation of normalized rules is a computation of the proof theoretic meaning of a collection of rules. We shall here define normalized recursion rules which contain transitive dependency, present an equivalent expression for the rule, propose a paradigm for Parallel evaluation of normalized rule based on the equivalent expression using join, partition, and transitive closure operations, and analyze response-time complexity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1096-1103
• /
• 2003

In this paper, we analyze the transient electromagnetic response from three-dimensional(3-D) dielectric bodies using a time-domain PMCHW(Poggio, Miller, Chang, Harrington, Wu) formulation. The solution method in this paper is based on the Galerkin's method that involves separate spatial and temporal testing procedures. Triangular patch basis functions are used for spatial expansion and testing functions for arbitrarily shaped 3-D dielectric structures. The time-domain unknown coefficients of the equivalent currents are approximated by a set of orthonormal basis functions that are derived from the Laguerre polynomials. These basis functions are also used as the temporal testing. Numerical results involving equivalent currents and far fields computed by the proposed method are presented.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.18-28
• /
• 1999

A new equivalent circuit model of package (SOP, Small Outline Package) is presented for designing radio frequency integrated circuits (RFIC). In the RF region, the paddle of a package does not work as an ideal ground. Further parasitics due to both coupling and loss have a substantial effect on MMIC. The equivalent circuit model and parameter extraction methodology for the electrical characteristics of the package are described by illustrating the SOP type packages. The accuracy of the model is evaluated by comparing the s-parameters of the commercial full-wave solver and those of HSPICE simulation with the circuit model. The proposed model shows an excellent agreement with full-wave analysis up to about 8GHz.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.3
• /
• pp.87-93
• /
• 2002

A procedure for figuring out proper amount of additional viscous damping required to keep the inelastic deformation of a plan-wise asymmetric structure within a given target performance point was developed. To this end the behavior of an asymmetric nonlinear structure after yielding is investigated. Then a formula for the required amount of equivalent damping was derived based on the ductility demand of the structure. The procedure was applied to a five-story asymmetric structure subjected to an earthquake load. According to the comparison with the results from the dynamic time-history analysis, the structure with viscous dampers installed in accordance with the proposed procedure showed satisfactory seismic performance in both the stiff and the flexible edges.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.687-696
• /
• 2006

An efficient numerical method is developed to estimate the elasto-plastic post-buckling strength of space-framed structures. The inelastic ultimate strength of beam-columns and frames is evaluated by the parametric study. Applying the improved plastic hinge analysis that evaluate the gradual stiffness decrease effects due to spread of plasticity, elasto-plastic post-buckling behavior of steel frames is investigated considering the various residual stress distributions. Introducing the plastification parameter that represent pread of plasticity in the element and performing parametric study of equivalent element force and member idealization, finite-element solutions for the elasto-plastic analysis of space frames are compared with the results by plastic region analysis, shell elements and experimental results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.368-374
• /
• 2016

This paper presents an experimental study on an electrical circuit model of the TiO2-based nano-wired memristor device for neuromophic applications. The electrical circuit equivalent model of the proposed memristor device consists of several electronics components and some passive devices including operational amplifiers, multipliers, resistors and capacitors. In order to verify the proposed design, both of simulation (using PSPICE) as well as hardware implementation were performed for the analysis of the memristor circuit with time waveforms, frequency spectra, I-V curves and power curves. The gained results from the measured data showed a good agreement with the simulation result that confirm the proposed idea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1106-1111
• /
• 2002

This paper presents a new watermarking scheme to reduce the detection error probability through removal of local mean values of an original signal equivalently. At first, we show that the error probability is reduced by the removal of the local mean values. In the removal process, we are in need of a method that equivalently removes the local mean values without modification of the original signal since the process changes the original signal. The method is based on the principle that as the watermark with zero local mean values is embedded, the local mean values of the original signal is equivalently removed in detection of the watermark. The principle are analytically proven, and the superiority of the proposed method is verified by experiments for variety of watermarks.