• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.7-14
• /
• 1999

어브레시브 워터젯을 이용한 Drilling시 깊이에 대한 예측은 가장 중요한 변주중의 하나다. 이 논문에서는 구멍 깊이의 예측 및 구멍 형상을 연구하기 위하여 3차원 해석 모델이 제안되었다. 해석 모델은 크게 두 가지로 구성되었다. 하나는 비선형 반복 방정식에서 생성된 입자의 운동식이며, 다른 하나는 수많은 입자에 의한 충돌시 가공능력을 규정지우는 Constitutive Equation으로 구성되었다. 이 모델은 구멍 가공이 진행됨에 따라 발생하는 감쇠 효과를 고려하였다.실험적인 고찰이 해석모델의 유용성을 검증하기 위하여 이루어졌으며, 근사한 결과를 보였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.182-187
• /
• 1994

트위스트 드릴을 사용한 구멍은 구멍가공중 가장 경제적인 방법중의 하나이다. 그러나 트위스트 드릴에 의한 가공은 길이에 대한 구멍경의 비가 한정되어 있다. 깊이/직경(L/D)의 비가 통상 5배 이상의 경우의 적절한 가공방법은 거압력의 절삭유를 공급할 수 있는 공구를 사용하여 가공하고 있으며, 그 대표적인 방법은 Long drull, Gun drill, BTA drill 및 Ejector drill등이 있다. 이들 방법중 BAT drill은 다른 가공공구에 비하여 우수한 가공능율을 갖고 있다. 그러나 BAT드릴에 의한 심공가공은 1회 가공에 의하여 요구되는 품질을 만족시켜야 함으로 이에 대응한 연구가 요구되고 있다. 따라서 본 연구는 BAT드릴링 시스템에 BAT drrill을 사용하여 심공가공할때 공작물의 형상 즉 표면 거칠기 및 지원도등 미치는 영향에 대하여 실험을 통하여 분석하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.1
• /
• pp.11-19
• /
• 2013

Purpose: The aim of this study was to evaluate the heat generation in bone in vitro during the guided flapless drilling procedure and the effect of drilling methods on the heat generation. Materials and methods: A model that has missing the first and second mandibular molars bilaterally was used. In group A, classical flap implant surgery was performed. In group B, flapless implant surgery using surgical guide was performed. In group C, flapless implant surgery using surgical guide without up-and-down pumping motion was performed. Temperature was measured with k-type thermocouple and a real-time digital thermometer. The thermocouples were placed at 0.5 mm away from the osteotomy area at the depths of 3 mm and 6 mm. The measured values were evaluated with independent t-test. Results: The mean temperature generated was $27.2^{\circ}C$ ($SD{\pm}2.1^{\circ}C$) and $27.5^{\circ}C$ ($SD{\pm}2.3^{\circ}C$) for groups A and B, respectively. These differences were not statistically significant. In group C, the mean temperature was $37.0^{\circ}C$ ($SD{\pm}3.4^{\circ}C$). There were statistically significant differences between groups B and C with respect to the mean temperature. Conclusion: These findings suggest that guided flapless drilling with up-and-down pumping motion may not significantly increase the bone temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.77-86
• /
• 1991

레이저 빔이갖고있는 spatial coherence 특성에 의해서 렌즈를 이용하여 집광시키면 집광부에서 고출력 밀도를 얻을 수 있다. 이와같이 집광된 레이저 빔을 재료의 표면에 조사하면 재료로 부터 미세량을 용융, 증발시키므로 일반적인 방법으로는 가공이 어려운 단단한 재료의 절단과 미세 구멍가공이 가능하게된다. 본 논문에서는 출력, 펄스 수, defoucsing, pulse on-time, 보조가스 압력등을 변화 시키면서 드릴링 실험을 수행하고, 각 실험 조건에서의 구멍 형상과 깊이를 측정함으로써 가공 변수들의 process sensitivity를 평가하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.48-57
• /
• 1998

Abrasive waterjet(AWJ)은 가공시 열에 의한 가공경화가 없기 때문에 유리, 세라믹, 타이타늄및 금속복합재료와 같은 난삭재의 가공기술로 사용이 증가되었다. Acoustic emission(AE)신호에 의한 AWJ 세라믹 drilling가공시 On-Line Monitoring의 가능성이 고찰되었다. 기계 적인 물성이 서로 상이한 3종류의 세라믹이 본 연구에서 사용되었으며, AE신호는 AWJ drilling의 깊이를 monitoring하는데 유용함을 알 수 있었고 또한 세라믹의 material removal mechanisms을 규명하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.669-670
• /
• 2007

본 논문은 천공수 산출기법에 의해 천공수를 산출하여 크롤러드릴을 이용한 기계천공으로 1회에 필요한 깊이를 천공하고, 장약공과 무장약공을 구분하여 장약 및 전색을 하고, 지발뇌관에 의한 순차적 발파 시공방법에 관한 것으로 현장 적용시 심빼기 발파효과와 동시에 무장약공에 의한 2차 자유면을 얻는 효과로 진동, 소음, 비석을 줄이고 암반지대의 정밀한 철탑기초굴착이 가능한 기술에 관한 연구이다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.294-300
• /
• 2010

Purpose: The template-guided implant surgery offers several advantages over the traditional approach. The purpose of this study was to evaluate the accuracy of coordinate synchronization procedure with 5-axis milling machine for surgical template fabrication by means of reverse engineering through universal CAD software. Materials and methods: The study was performed on ten edentulous models with imbedded gutta percha stoppings which were hidden under silicon gingival form. The platform for synchordination was formed on the bottom side of models and these casts were imaged in Cone beam CT. Vectors of stoppings were extracted and transferred to those of planned implant on virtual planning software. Depth of milling process was set to the level of one half of stoppings and the coordinate of the data was synchronized to the model image. Synchronization of milling coordinate was done by the conversion process for the platform for the synchordination located on the bottom of the model. The models were fixed on the synchordination plate of 5-axis milling machine and drilling was done as the planned vector and depth based on the synchronized data with twist drill of the same diameter as GP stopping. For the 3D rendering and image merging, the impression tray was set on the conbeam CT and pre- and post- CT acquiring was done with the model fixed on the impression body. The accuracy analysis was done with Solidworks (Dassault systems, Concord, USA) by measuring vector of stopping’s top and bottom centers of experimental model through merging and reverse engineering the planned and post-drilling CT image. Correlations among the parameters were tested by means of Pearson correlation coefficient and calculated with SPSS (release 14.0, SPSS Inc. Chicago, USA) ($\alpha$ = 0.05). Results: Due to the declination, GP remnant on upper half of stoppings was observed for every drilled bores. The deviation between planned image and drilled bore that was reverse engineered was 0.31 (0.15 - 0.42) mm at the entrance, 0.36 (0.24 - 0.51) mm at the apex, and angular deviation was 1.62 (0.54 - 2.27)$^{\circ}$. There was positive correlation between the deviation at the entrance and that at the apex (Pearson Correlation Coefficient = 0.904, P = .013). Conclusion: The coordinate synchronization 5-axis milling procedure has adequate accuracy for the production of the guided surgical template.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.25-32
• /
• 2014

Petroglyphs is an essential part of the worldwide cultural heritage since it plays a key role for the comprehension of prehistoric communities previous to writing. nowadays 3D data are a critical component to permanently record the form of important cultural heritage so that they might be passed down to future generations. Recent 3D scanning technologies allow the generation of very realistic 3D model that can be used for multimedia museum exhibitions to attract the users into the 3D world. In this paper, we develop the 3D petroglyph VR contents based on a novel gesture recognition method. The proposed gesture recognition method can recognizes the movements of the user using 3D depth sensor by comparing with the pre-defined movements. Also this paper presents new approaches for 3D petroglyphs data recording using 3D scanning technology as accurate and non-destructive tools.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.373-379
• /
• 2010

EMAT has been applied in various fields for flaw detection and material characterization because it has noncontact property in wave generation and a good mode selectivity. Unfortunately, however, EMAT shows low signal to noise ratio relative to commercial contact transducer because of low energy conversion efficiency. If the phase matching through the control of time delay between each coil consisting of the array EMAT is accomplished, it is expected that it will be a solution for the improvement of low signal to noise ratio. In this experiment, the phased array EMATs which consists of 3 or 4 meander coils and one big magnet were fabricated for surface and vertical shear wave generation. Effect of phased delay control on signal directivity and amplitude enhancement was verified. A slit with the depth of 0.5 mm and a side-drill hole of 0.5 mm diameter were clearly detected by fabricated phased array EMATs, respectively.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2008

This study was conducted to investigate the characteristics of the leaching of metal components from CCA-treated wood during outdoor exposure. CCA-treated wood specimens were placed horizontally or buried vertically into the soil, and then exposed to the natural environment for a year. Wood samples were collected from the side of the horizontal wood specimens using a drill and saw dust samples were collected at the end of the exposure. Soil samples were also obtained around the wood specimens and at different depths of the posts. Wood and soil samples were analyzed for metals using an atomic absorption spectrometer. Monthly metal concentrations varied greatly and more metals were released when wood specimens were exposed vertically than horizontally. Arsenic was released from the wood by 80 % of the intial content. In addition, more leaching was observed from the zone below the ground than above the ground, and soil around the posts was contaminated with metals released from CCA-treated wood.