• Title/Summary/Keyword: 뒤틀림

Search Result 143, Processing Time 0.022 seconds

Vertebral abnormality in Hatchery-reared River puffer, Takifugu obscurus fingerlings (인공종묘 생산 황복 (Takifugu obscurus) 치어의 척추 변형에 관하여)

  • Park, Sung-Woo;Kang, Kook-Hee
    • Journal of fish pathology
    • /
    • v.20 no.2
    • /
    • pp.129-137
    • /
    • 2007
  • Skeletal deformity in hatchery-reared river puffer (Takifugu obscurus) fingerlings occurred. The vertebral abnormality was recognized with naked eyes 80 days after hatching. Affected fish had a good appetite but no clinical signs were found except the vertebral abnormality. As more than 90% of the hatchery-reared fish exhibited vertebral abnormality, the fingerlings could not be used for commercial seeds any more. Morphological changes in the vertebrate and the swim bladder were observed with a soft X-ray. Histopathological changes on the caudal muscle around the deformed vertebrae, gill, and spleen were also examined to clarify the cause of the deformity. Spinal curvature occurred between vertebrae 10 and 12, but any malfunction of the swim bladder was not found. The diameters of the muscle fibers around the deformed vertebrae were much smaller and more irregular than those in normal fish, and the gabs between the fiber bundles were greatly enlarged. No evidence of inflammation response was found in the muscle layer. In the hatchery, feed was putting at the position of water inflow, which might attract the fingerings to move toward the feed in spite of incomplete development of their caudal muscle fibers. From these results, it is suggested that the high speed of water current in rearing aquaria might be associated with the development of vertebral abnormality.

Dimensional Stability of Waterlogged Archaeological Wood in PEG, Lactitol and Sucrose Treatment (수침목재의 PEG, 락티톨, 슈크로오스 처리에 의한 치수안정화 효과)

  • Lee, Hyo Sun;Kang, Ae Kyung;Park, Sang Jin
    • Journal of Conservation Science
    • /
    • v.8 no.1 s.11
    • /
    • pp.28-32
    • /
    • 1999
  • The performance of dimensional stabilization of lactitol, PEG (Mw, 4000), and sucrose was evaluated for thin sections of oak wood (Quercus sp.) that had been buried in underground for presumably 1500 years. Thin wood sections of the specimen were soaked for three and seven days in each stabilizing agent with wide concentration ranges of 10, 30, 50, and $70\%$ by weight. Sucrose showed the largest weight gain among three agents, and the shrinkage of cross sections were found to be $1\%\;and\;4\%$ for three and seven days soaking, respectively. The result showed that sucrose among three stabilizing agents used was the best for the dimensional stabilization of the oak wood.

  • PDF

A study on development of screen inspection system to detect damages, bowing, and foreign materials of nuclear fuel assembly for reactor in nuclear power plants (원전 연료집합체의 손상, 변형 및 이물질 검사시스템 개발에 관한 연구)

  • Park, Ki-Tae;Lho, Tae-Jung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.8
    • /
    • pp.3617-3624
    • /
    • 2013
  • Screen inspection system applied vision and laser scan technology which detect foreign materials caused fuel rod to be damaged, and which inspect fuel rod damage, bowing, distortion and grid damages, was developed to secure reliability and reproductivity of inspection method for nuclear fuel assembly during outage. In further, datum of inspection results will be continuously monitored and given understand the pattern of bowing and distorting for fuel assembly in reactor. Understanding of the pattern will be key technical information to avoid grid demage might be happened during refueling outage and provides important data base for safe operation of nuclear power plant in Korea and world wide.

Study on The Estimation Method of the Joint for the Operation of the Upper Limb Rehabilitation Equipment for Hemiplegic Patients II (편마비 환자의 상지 재활 기기 운용을 위한 관절 각 추정 기법에 관한 연구 II)

  • Song, K.S.;Eom, S.H.;Lee, E.H.
    • Journal of rehabilitation welfare engineering & assistive technology
    • /
    • v.8 no.4
    • /
    • pp.313-318
    • /
    • 2014
  • In this paper, we propose a method for correcting the measurement axis twist that occurs in the process of wearing and each estimation method of joint in which the inertial measurement unit based in health arm by the method of operation upper limb rehabilitation equipment of hemiplegic patients. In order to verify the proposed method, it is fitted with a inertial measurement unit of the upper arm and forearm of the experimenter left arm, verified by comparing actual joint angle is detected by photographing the arbitrary posture, the angle that the estimated joint. Then, it was verified by comparing the applied front / rear techniques for correcting the measurement axis twist. A result of the experiment, before applying the measurement axis twist correction, joint, after but each match rate showed a weak concordance rate in 89.16% and were corrected, measurement axis twist, each concordance rate of joint agreement of 93.28% I understand that it has been 4.12% improvement in the rate.

  • PDF

Parametric Study on Curved Tub Girders for Varying Radii of Curvature (곡선 개구제형 거더의 곡률에 따른 매개변수 해석연구)

  • Kim, Jong-Min;Han, Taek-Hee;Choi, Jun-Ho;Choi, Byung-Ho;Kang, Young-Jong
    • Journal of Korean Society of Steel Construction
    • /
    • v.24 no.2
    • /
    • pp.175-188
    • /
    • 2012
  • A parametric study for varying the radii of curvature is performed with a curved tub girder bridge having three continuous spans. The bracing forces of top lateral bracings from the results of numerical equations are compared to those of 3-dimensional finite element analyses. New modifying factors applicable in computing the nominal member forces of top lateral bracings were suggested. The numerical equations were derived based on one girder system, and it is shown that the numerical equations exhibit some errors compared with 3D FEA results. The main reason for this phenomenon lies on the number of girders. The twin girder system has an external cross-beam between inner and outer girder. It also has larger lateral stiffness than the single girder system. Finally, the distributions by the torsion, bending, distortion, and lateral loading of the top lateral bracing forces were presented in this paper.

The Compressive Strength of Thin-Walled Cold-Formed Steel Studs with Slits in the Web (복부에 슬릿이 있는 박판냉간성형형강 스터드의 압축강도)

  • Kwon, Young-Bong;Soe, Eung-Kyu;Lim, Duk-Man;Kim, Gap-Deuk;Kwon, In-Kyu
    • Journal of Korean Society of Steel Construction
    • /
    • v.24 no.2
    • /
    • pp.189-197
    • /
    • 2012
  • The cold-formed steel stud, which has been used as a load-bearing member of wall panels for steel houses, poses a significant problem in insulation due to heat bridging of the web. Therefore, some additional thermal insulating materials are required. In order to solve this problem, the cold-formed steel thermal stud with slits in the web was developed. However, estimating the structural strength of thermal studs is very difficult because of the arrangement of perforations. In this paper, an analytical and experimental research on thermal studs is described. Three types of studs with different length, pitch and arrangement of slits were tested to failure. A simple design approach was proposed based on the test results. The proposed method adopted the direct strength method, based on the elastic local and distortional buckling stress of plain studs with equivalent thickness in the web instead of thermal studs. The predictions using the proposed method were compared with test results for verification and the adequacy of the proposed method was confirmed.

A Study on the Variation of Physical Properties of Line-heated for Type-B LNG Fuel Tank with 9% Nickel Steel Plate (9% Nickel강이 적용된 Type-B LNG 연료탱크 선상가열의 물성 변화에 관한 연구)

  • Choi, Kyung-Shin;Lee, Ji-Han;Hong, Ji-Ung;Chung, Won-Jee
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.19 no.7
    • /
    • pp.89-97
    • /
    • 2020
  • Container vessels continue to grow in size, led by global shipowner. Large ships can be loaded more cargo at a time, reducing the cost of transportation per teu. this eventually leads to economies of sale, in which the production cost per unit decreases with increasing output. in accordance with the 70th Convention of the Marine Environment Protection Committee of the International Maritime Organization, as of January 1, 2020, MARPOL Annex VI Regulation 14.1.3 will be effective. All vessels must be meet these criteria to reduce Sox emissions and reduce NOx emissions by reducing the content of manned sulfur oxides from 3.5% to less than 0.5%, otherwise IACS Member States Entry to the port is denied. in order to do that need to LNG storage tank. in this study characteristic of the material after line heating (600℃,700℃,800℃,900℃) of 9% Ni steel used in the manufacture of LNG fuel tank of ship were verified using by mechanical test. In the heating method by line heating. The initial properties of steel are changed by variables such as temperature, time, speed. The experimental data of line heating presented in this paper confirmed that the initial change of 9% Ni steel could be minimized.

Control of Copper Thin Film Characteristics by using Pulsed DC Power Magnetron Sputter System (Pulsed DC Power Magnetron Sputter System을 사용한 Copper 박막 특성 조절)

  • Kim, Do-Han;Lee, Su-Jeong;Kim, Tae-Hyeong;Lee, Won-O;Yeom, Won-Gyun;Kim, Gyeong-Nam;Yeom, Geun-Yeong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2017.05a
    • /
    • pp.107-107
    • /
    • 2017
  • 전자제품의 성능이 향상됨에 따라서 전자제품에 사용되는 부품의 고집적화가 필연적으로 요구되고 있으며, 고집적화 된 전자제품의 방열(heat dissipation)에 관한 문제점이 대두되고 있다. 방열은 전자기기의 성능과 수명을 유지하는데 있어서 중요한 문제 중 하나로서 방열 효과를 높이기 위해 다양한 연구 개발이 진행 중이다. 방열에 사용되는 소재로는 Cu가 있으며, 저렴한 가격과 상대적으로 높은 방열 효율을 가지는 장점이 있다. Cu는 전기 도금 증착 방법을 사용하여왔으나, 전기도금 방식으로 증착된 Cu 방열판은 제품에 열이 축적될 경우 Cu와 substrate 사이의 residual stress로 인해 박리나 뒤틀림 현상 등이 발생하여 high power를 사용하는 device의 방열 소재로 사용하기에는 개선해야 할 문제점이 있다. 이러한 문제점을 극복하기 위한 방법으로 magnetron sputter 증착 방법이 있으며, magnetron sputter은 대면적화가 용이하고, 다양한 물질의 증착이 가능한 장점으로 인해 hard coating 또는 thin film 증착과 같은 공정에 사용되고 있다. 특히 증착된 film의 특성을 조절하기 위해서 magnetron sputter에 pulse 또는 ICP (inductively coupled plasma) assisted 등을 적용하여 plasma 특성을 조절하는 방법 등에 관한 연구가 보고되고 있다. 본 연구에서는 pulsed magnetron sputtering 방식을 이용하여 증착된 Cu film 특성 변화를 확인하였다. 다양한 pulsing frequency와 pulsing duty ratio 조건에서, Si substrate 위에 증착된 Cu film과의 residual stress 변화를 측정하였다. Pulse duty ratio가 90% 에서 60%로 감소함에 따라서 Cu film의 residual stress가 감소하였고, pulsing frequency가 증가함에 따라 Cu film의 residual stress가 감소하는 것을 확인하였다. 증착 조건에 따른 plasma의 특성 분석을 위하여 oscilloscope를 이용하여 voltage와 current를 측정하였고, Plasma Sampling Mass spectrometer 를 이용하여 ion energy의 변화를 측정하였다. 이를 통해 plasma 특성 변화가 증착된 Cu film에 미치는 영향과 residual stress의 변화에 대한 연관성에 대하여 확인할 수 있었다.

  • PDF

The Effects of Washing and Drying on the Dimensional Stability of Woven Fabrics with and without Spandex (세탁 및 건조과정에 의한 스판덱스 혼방 직물의 변형 비교)

  • Yun, Changsang;Ko, Yerin;Song, Gyeong Hee;Shin, Hyodam;Park, Chung Hee
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.41 no.3
    • /
    • pp.458-467
    • /
    • 2017
  • There is increased interest in clothes dryers and garments made of spandex-blend woven fabrics; however, there is limited information available for the laundering and drying these clothes. This study investigates the effects of washing and drying on shrinkage, skewness, and wrinkle for woven fabrics with and without spandex. When spandex with good elastic recovery was blended, the deformed shape from washing and drying improved skewness and wrinkle by easily returning to its original shape. However, these properties had a negative effect on shrinkage in terms of length and area change. When the influence of clothes maintenance was classified, the drying process had the biggest influence of 58%, followed by spinning-rinsingwashing. Tumble drying, in which the fabric is exposed to mechanical force and heat for a long period, had more negative effects on the dimensional stability than line drying. The spandex blend had the effect of preventing skewness and wrinkle in garments, but it was also shown to accelerate shrinkage by garment maintenance cycles. It was important to control drying in order to reduce shrinkage during the maintenance process; consequently, this had the greatest influence on the dimensional stability of fabrics. Therefore, line drying was more advantageous for spandex-blend fabrics than tumble drying in terms of management for shrinkage, skewness, and wrinkle.

Determination of formaldehyde residue and histopathological observation in formalin and neutral-formalin treated Korean rockfish(Sebastes schlegeli) (포르말린과 중성포르말린 약욕한 어류의 Formaldehyde 잔존량 측정과 병리학적 관찰)

  • Cho, Jae-Kwon;Yang, Han-Choon
    • Journal of fish pathology
    • /
    • v.9 no.2
    • /
    • pp.157-168
    • /
    • 1996
  • In this study, Residue of formaldehyde and histopathological changes in formalin and neutralformalin in treated fish(Sebastes schlegeli) were observed at two different temperatures(15 and $25^{\circ}C$). Immediately after in treatment, residue of formaldehyde in formalin treated fish was show little bit higher than in neutral-formalin treated fish at $15^{\circ}C$. But, there is no difference at water temperature $25^{\circ}C$. The elimination of formaldehyde was markedly temperature-dependent. The approximated withdrawal time were 72hr and 24hr at water temperature 15 and $25^{\circ}C$. Formalin was more toxic than the neutral-formalin at the same condition. Intensity of tissues damage was increased with increasing concentration of chemical and temperature. Formalin and neutral-formalin treatments caused edema and seperation of epithelium, winding of secondary gill lamella, necrosis in the gill ; congestion and pycnosis, vacuolation in the liver ; hydropic and granulated degeneration, necrosis of epithelial cells in the proximal renal tubule ; increasing mucus cells, cracking, necrosis of epidermis and dermis in the skin tissue.

  • PDF