• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.185-194
• /
• 2001

This study was designed to evaluate the effects of angulation changes of head posture on the enlargement ratios of a lateral headfilm depending on the vortical or horizontal rotation of the objects. A device was constructed to measure regional changes of enlargement ratios. The device was held within the cephalostat and cephalograms recorded at each measured degrees of the device tilting, vertically and horizontally. The enlargement ratios of the horizontal, vertical, and angular measurements on the films taken at each tilted angulations were obtained and compared with those on the films taken without rotation. In summary, the enlargement ratios of the horizontal linear measurements were decreased during horizontal rotations. The enlargement ratios of vortical measurements of the right side on the film were increased and those of the left side were decreased by the horizontal rotations. Enlargement ratios of horizontal measurements were affected further than those of vertical measurements by the same angular changes of the horizontal rotations. Therefore, a disruption of parallelism between the object's midsagittal plane and the film could result in distortion of the image while vertical rotation around the object's porionic axis would not significantly affect the enlargement ratios on the headfilm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.222-232
• /
• 2014

Purpose: This study aims to investigate if 2D analysis method is applicable to analysis of CBCT by comparing measuring points of CBCT with those of Adjusted 2D Lateral Cephalogram (Adj-Ceph) with magnification adjusted to 100% and finding out at which landmarks the difference in position appear. Materials and methods: CBCT data and Adj-Ceph (100% magnification) data from 50 adult patients have been extracted as research objects, and the horizontal (Y axis) and vertical (Z axis) coordinates of landmarks were compared. Landmarks have been categorized into 4 groups by the position and whether they are bilaterally overlapped. Paired t-test was used to compare differences between Adj-Ceph and CBCT. Results: Significant difference was found at 11 landmarks including Group B (S, Ar, Ba, PNS), Group C (Po, Or, Hinge axis, Go) and Group D (U1RP, U6CP, L6CP) in the horizontal (Y) axis while all the landmarks in vertical (Z) axis showed significant difference (P<.05). As a result of landmark difference analysis, a meaningful difference with more than 1 mm at 13 landmarks were indentifed in the horizontal axis. In the vertical axis, significant difference over 1 mm was detected from every landmark except Sella. Conclusion: Using the conventional lateral cephalometric measurements on CBCT is insufficient. A new 3D analysis or a modified 2D analysis adjusted on 19 landmarks of the vertical axis and 13 of the horizontal axis are needed when implementing CBCT diagnosis.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.1-7
• /
• 2000

It is important that the orthodontist accurately assess the degree to which facial asymmetry contributes to a given malocclusion before treatment planning. P-A, submentovertex and verticosubmental view have been used in the assessment of facial asymmetry. Among them, submentovertex view is rarely used because it has low reproducibility and is short of normal data and proper analysis method. The purpose of this study was to develop a submentovertex cephalomentrics and obtain normal data in Korean adults. The subjects consisted of 40 normal adults (male : 22, female 18) without the experience of orthodontic treatment. We find the 2 angular and 9 linear measurements. Though submentovertex cephalomentrics has the limitation in comparing the absolute length between right and left, it is useful to examine the relationship of skeletal and dental midline, the shape and location of condyle head and the shape of mandibular body in submentovertex view Therefore, if we understand the limitation of submentovertex cephalomentrics and use lateral , P-A and submentovertex cephalomentrics together, we will measure the location and amount of skeletal disharmony more exactly.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.252-264
• /
• 2008

Objective: To aid the development of a frontal image simulating program, we evaluated the soft tissue frontal changes in relationship to movement of hard tissue with orthognathic surgery of facial asymmetry patients. Methods: Preoperative and postoperative frontal cephalograms and frontal view photographs of 45 mandibular surgery patients with facial asymmetry were obtained in a standardized manner. Vertical and horizontal changes of hard tissue and soft tissue were measured from cephalograms and photographs, respectively. Soft tissue change in result to hard tissue change was then analyzed. Results: Both vertical and horizontal correlation analysis showed a weak relationship between the changes. Hard tissue points that were picked for 1 : 1 mean ratio with soft tissue points did not show any significant relevance. For each soft tissue change, regressive equation was formulated by stepwise multiple regression analysis, and the equation for soft tissue Menton was most reliable in predicting changes. Both vertical and horizontal hard tissue changes were used together in prediction of vertical or horizontal soft tissue change. Conclusions: The results suggest that computerized image simulation using regression analysis may be of help for prediction of soft tissue change, while 1:1 mean ratio method is not useful.

• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.203-213
• /
• 2013

Objecives : The purpose of the study was to evaluate treatment outcome of mandibular advancement device(MAD) in obstructive sleep apnea (OSA) patients using full night polysomnography and cephalometry. Methods : Twenty-seven OSA patients were confirmed by full night, lab-attended polysomnography. Cephalometric examinations were conducted to obtain SNA, ANB, $AH{\bot}MP$, AH-C3, SPT, PNS-U, NAS, SOAS, MOAS, and HAS. Mandibular advancement devices (MADs) were fabricated and delivered for all subjects. After acclimation period of MAD, the second polysomnographic examinations were conducted in the same manner. Polysomnographic variables were compared between before and after MAD placement. Also, correlation coefficients were calculated between apnea-hypopnea index (AHI) and each item of cephalometric parameters. Results : There were significant improvements in total AHI, lowest $SpO_2$, and total arousal index after MAD therapy. Also, there were significant improvements in NREM $SpO_2$ and NREM AHI, but not in REM $SpO_2$ and REM AHI with MAD. Stratifying the sleep stage, there were significant decrease in stage I and significant increases in stage II and REM, but change in stage III was not significant. SNA and SOAS were significantly correlated with total AHI and NAS was significantly correlated with supine AHI. ANB was significantly associate with the effect of MAD. Conclusions : MAD is an effective treatment in OSA patients comparing polysomnographic variables before and after treatment. Cephalometric examination can be useful to evaluate OSA patients and predict treatment outcome of MAD.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.1
• /
• pp.127-135
• /
• 1991

This study purports to make in consideration of the recent xeroradiographic development an exact analysis, by comparison, of conventional cephalometry and xeroradiographic cephalometry that are indispensably utilized in the field of orthodontics as a means of cephalometric measuring For that purpose attached to ten landmarks on a dry skull was a lead ball, a radio-opaque substance, and projected X-ray beam one time each by means of the two methods, and then ten times each without change of locations of the skull, in the state in which the lead ball was removed. These data were committed to ten dentists for tracing to determine a difference between the same kind of cephalometries. A computerized statistic analysis of the data shows findings, as follows: 1. Conventional cephalometry shows higher accuracy in Nasion, as compared with xeroradiographic cephalometry. 2. Xeroradiographic cephalometry is found more accurate in Anterior Nasal Spine, 'A' Point, Pogonion, Gonion, Porion, Prosthion and Orbitale than conventional cephalometry. 3. There is no difference between both methods in Basion. 4. At test between the two methods by all the dentists reveals that xeroradiographic cephalometry is more accurate than conventional cephalometry.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.109-118
• /
• 2005

In the field of pediatric dentistry, comparison and analysis of cephalogram values of children are important fir evaluation of growth and development, and are essential to evaluate the craniofacial form and growth pattern for early diagnosis of malocclusion. For this, cephalographic norm values are important, but not many studies on the primary dentition exist. To compare the past norm values of normal occlusion in the primary dentition with current norms, preschool children, 4 to 5 years of age, with normal occlusion in the primary dentition who visited our hospital were examined. Among these children, 46 children with normal facial form and developmental status were chosen for evaluation of cephalogram values. The following results were as follows: 1. For skeletal values, the angular values showed no significant differences between males and females, and the linear values were generally greater in males than females. 2. SNA was $81.3^{\circ}$, SNB was $76.6^{\circ}$ and ANB difference was $4.7^{\circ}$. 3. The ratio for Mandibular body length to Anterior cranial base length was 0.9 : 1 for both male and female and the ratio for posterior facial height to anterior facial height was 61.4 % for male, 62.0 % for female. 4. For dental values, IMPA was $84.2^{\circ}$ and UA to SN was $90.8^{\circ}$. 5. The upper lip to Ricketts esthetic line was positioned 2.6 mm anteriorly, and the lower lip to Ricketts esthetic line was positioned 2.5 mm anteriorly.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.453-463
• /
• 1995

Most commonly used axis for central incisors in lateral cephalometric radiographs is the line connecting root apex and incisor edge. However, crown axis and root axis do not always coincide in cases of malocclusion patients. The angle created by these axis are called the collum angle, which should be considered in orthodontic diagnosis and treatment. In this study, 31 Class I malocclusion, 30 Class II division 1 malocclusion, 31 Class II division 2 malocclusion, and 31 Class m malocclusion patients were selected and their collum angles were measured. Correlation between these angles and malocclusions was investigated, and the correlation analysis with other parameters in cephalometrics was done. The results were as follows ; 1. The mean collum angles according to the types of malocclusions are ; $3.11^{\circ}{\pm}3.54^{\circ}$ for Class I, $1.23^{\circ}{\pm}2.41^{\circ}$ for Class II division 1, $3.77^{\circ}{\pm}4.39^{\circ}$ for Class II division 2, and $3.90^{\circ}{\pm}4.08^{\circ}$ for Class III malocclusion. 2. Statistically significant differences in collum angles were noted between Class II division 1 group and Class II division 2 and Class III group. 3. Significant correlations were found between collum angles and other parameters used in cephalometrics, namely IMPA for Class I, Wits for Class II division 1, Overbite for Class II division 2 and for ClassIII.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.937-946
• /
• 1998

The patient with an anterior open bite has one of the most difficult orthodontic problem to correct. Previous studies have yielded different conclusions as to exactly where the morphologic problems associated with vertical dysplasia-high angle cases are located. In order to identify the cephalometric features of high angle cases and highlight the measurements that characterize high angle cases, 109 pretreatment cephalograms, 35 high angle, 37 average angle, and 37 low angle cases, were analyzed and compared statistically. As the mandibular plane was steeper, the anterior facial height, especially lower anterior facial height, became greater, and the posterior facial height became smaller. All the dentoalveolar vertical dimensions, especially in upper, increased. And all the skeletal angular measurements increased. Especially Lower genial angle had most positive correlation to mandibular Plane angle. Upper incisor was lingually inclined, and lower incisor was labially inclined in high angle cases.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.317-325
• /
• 1999

In proper diagnosis of skeletal Class III malocclusion, it was important to know the pattern of three dimensional skeletal & facial disharmony. The purpose of this study was to obtain P-A cephalometric characteristics in skeletal Class III malocclusion comparing with normal occlusion. The samples were consisted of 120 subjects, divided into four groups : Male normal occlusion, Female normal occlusion, Male skeletal Class III malocclusion, Female skeletal Class III malocclusion. Posteroanterior and lateral cephalogram were taken from the subjects with a x-ray apparatus (ASHAI CX90SP, Japan) and traced on acetate paper with routine manner. The transverse and vertical values from posteroanterior cephalometry, the sagittal values from lateral cephalometry and their ratio were obtained. The results were as follows: 1. The anteroposterior discrepancy in skeletal Class III group was not due to short maxillary length(Cd-A), but to longer mandibular length(Cd-Gn) than normal occlusion group. 2. The faces of skeletal Class III group were longer than normal occlusion group. It was not due to increase of upper face height(Cg-ANS) but to increase of the lower face height(ANS-Me) especially mandibular height(Cd-Me). 3. There was no difference in the facial width values between normal occlusion group and skeletal Class III group, except upper molar width(U6-U6), lower molar width(L6-L6) and mandibular width(Ag-Ag) of female skeletal Class III group which were larger than normal occlusion group. 4. The increase of mandibular length of skeletal Class III group was reflected in the increase of lower facial height but did not have an effect on the mandibular width.