• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.103-109
• /
• 2015

In an amplitude-splitting interferometer, a beam splitter divides an input beam into two parts, which are superposed after propagating along separate paths, producing an interference effect. We have investigated the phase relation between the reflected and transmitted light waves at BS's made of lossless dielectric stacks. If we define the phases with proper reference planes, a definite phase relation exists, irrespective of the detailed structure of the layers in the BS. Although this results from the generalized Stokes relations, we have verified it numerically for two representative BS's with symmetric and asymmetric layer structures respectively. When we applied the phase relation to interferometers, we could determine the superposition state of the output beam (either constructive or destructive interference) for a general BS, and could verify that the light's energy was conserved.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.860-868
• /
• 2000

In this work, the electro-magnetic interference (EMI) characteristics of PAN-based carbon fibers-reinforced composites are investigated with difference to manufactural parameters, i.e., fiber grade, fiber orientation angle, and laminating method. As a result, EMI shielding effectiveness (SE) of the composites greatly depends on a fiber orientation in composite angle. Especially, the fiber grade affects SE of composites in case of orientation angle of 0$^{\circ}$. Then the SE become greater as the change of electric character according to the arrangement directions, i.e., electrical anisotropy in the same constituent materials. This is due to the skin effect which is represented in the surface of electro-magnetic wave in high-frequency range. In all cases according to lamination methods, the composites represents SE of 83~98% over. Whereas, in symmetric and unsymmetric laminate structures, the SE decreases slightly as the laminate angles of composites increases. On the contrary. the repeating laminates structure shows the opposite tendency. Especially, 90$^{\circ}$ repeating laminate structure shows the SE more than 90% over the measuring frequency.

• Korea Real Estate Review
• /
• v.28 no.2
• /
• pp.21-34
• /
• 2018

The purpose of this study is to investigate the effect of macro-finance variables on the correlation between the housing and stock markets because understanding the nature of time-varying correlations between different assets has important implications on portfolio allocation and risk management. Thus, we adopted the AG-DCC GARCH model to obtain time-varying, conditional correlations. Our sample ranged from January 2004 to November 2017. Our empirical result showed that the coefficients on asymmetric correlation were significantly positive, implying that correlations between the housing and stock markets were significantly higher when changes in the housing price and stock returns were negative. This finding suggested that the housing market has less hedging potential during a stock market downturn, when such a hedging strategy might be necessary. Based on the regression analysis, we found that the term spread had a significantly negative effect on correlations, while the credit spread had a significantly positive effect. This result could be interpreted by the risk premium effect.

• Atmosphere
• /
• v.23 no.1
• /
• pp.85-92
• /
• 2013

We estimate atmospheric radiative heating effect of aerosols, based on AErosol RObotic NETwork (AERONET) and lidar observations and radiative transfer calculations. The column radiation model (CRM) is modified to ingest the AERONET measured variables (aerosol optical depth, single scattering albedo, and asymmetric parameter) and subsequently calculate the optical parameters at the 19 bands from the data obtained at four wavelengths. The aerosol radiative forcing at the surface and the top of the atmosphere, and atmospheric absorption on pollution (April 15, 2001) and dust (April 17~18, 2001) days are 3~4 times greater than those on clear-sky days (April 14 and 16, 2001). The atmospheric radiative heating rate (${\Delta}H$) and heating rate by aerosols (${\Delta}H_{aerosol}$) are estimated to be about $3\;K\;day^{-1}$ and $1{\sim}3\;K\;day^{-1}$ for pollution and dust aerosol layers. The sensitivity test showed that a 10% uncertainty in the single scattering albedo results in 30% uncertainties in aerosol radiative forcing at the surface and at the top of the atmosphere and 60% uncertainties in atmospheric forcing, thereby translated to about 35% uncertainties in ${\Delta}H$. This result suggests that atmospheric radiative heating is largely determined by the amount of light-absorbing aerosols.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.241-242
• /
• 2009

There are marry ships and marine structures and also has marry differences on according to the shape and the interval of hulls to the purpose. the multi-submerged body needs appropriate distance between the hulls because of the optimum hull form. thus, through this paper, the flow characteristics behind the multi-submerged body according os the distance ration between the hulls and various angles of attack was conducted.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.191-204
• /
• 1998

The general formulation for free vibration and stability analysis of unsymmetric thin-wared space frames is presented in case where the shear deformation effects are neglected. The kinetic and total potential energies are derived by applying the extended virtual work principle, introducing displacement parameters defined at the arbitrarily chosen axis and including warping deformation and second order terms of finite semitangential rotations. In formulating the finite element procedure, cubic Hermitian polynomials are utilized as shape functions of the two node space frame element. Mass, elastic stiffness, and geometric stiffness matrices for the unsymmetric thin-walled section are evaluated, and load-correction stiffness matrices for off-axis distributed loadings are considered. In order to illustrate the accuracy and practical usefulness of this formulation, finite element solutions for the free vibration and stability problems of thin-walled beam-columns and space frames are presented and compared with available solutions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.67-75
• /
• 1986

This paper introduces the nonlinear Stream Function Wave Theory for design waves efficiently to compute the wave energy and energy transport quantities and to analyze the effects of nonlinearities on them. The Stream Function Wave Theory was developed by Dean for case of the observed waves with assymmetric wave profiles and of the design waves with symmetric theoretical wave profiles. Dalrymple later improved the computational procedure by adding two Lagrangian constraints so that more efficient convergence of the iterative numerical method to a specified wave height and to a zero mean free surface displacement resulted. And the Stream Function coefficients are computed numerically by the improved Marquardt algorithm developed for this study. As the result of this study the effects of nonlinearities on the wave quantities of the average potential energy density, the average kinetic energy density result in overestimation by linear wave theory compared to the Stream Function Wave Theory and increase monotonically with decreasing $L^*/L_O$ and with increasing $H/H_B$. The effects of nonlinearities on the group velocity and the wavelength quantities result in underestimation by linear wave theory and increase monotonically with increasing $H/H_B$. Finally the effect of nonlinearity on the average total energy flux results in overestimation for shallow water waves and underestimation for deep water waves by linear wave theory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.389-394
• /
• 2017

In a conventional ship structure, stiffeners with an asymmetric section, such as inverted angles, are used widely despite the disadvantage of strength compared to the stiffeners with a symmetric section, such as a built-up T. On the other hand, T-type built-up members are attracting more attention than L-type inverted angles due to the increased size of ships. The purpose of this study was to develop an optimal design program for a built-up T, and apply an evolution strategy as an optimization technique. In the optimization process, the gross thickness concept was adopted for the design variables and objective function, and the constraints are set up based on HCSR (Harmonized Common Structural Rules). Using the developed program in this study, the optimal stiffener design was carried out for 300K VLCC and 158K COT of which the orders were obtained lately. The optimal results revealed the weight reduction effect of 144 tons and 60 tons, respectively.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.453-462
• /
• 2009

Studies on software plagiarism detection, prevention and judgement have become widespread due to the growing of interest and importance for the protection and authentication of software intellectual property. Many previous studies focused on comparing all pairs of submitted codes by using attribute counting, token pattern, program parse tree, and similarity measuring algorithm. It is important to provide a clear-cut model for distinguishing plagiarism and collaboration. This paper proposes a source code clustering algorithm using a probability model on extreme value distribution. First, we propose an asymmetric distance measure pdist($P_a$, $P_b$) to measure the similarity of $P_a$ and $P_b$ Then, we construct the Plagiarism Direction Graph (PDG) for a given program set using pdist($P_a$, $P_b$) as edge weights. And, we transform the PDG into a Gumbel Distance Graph (GDG) model, since we found that the pdist($P_a$, $P_b$) score distribution is similar to a well-known Gumbel distribution. Second, we newly define pseudo-plagiarism which is a sort of virtual plagiarism forced by a very strong functional requirement in the specification. We conducted experiments with 18 groups of programs (more than 700 source codes) collected from the ICPC (International Collegiate Programming Contest) and KOI (Korean Olympiad for Informatics) programming contests. The experiments showed that most plagiarized codes could be detected with high sensitivity and that our algorithm successfully separated real plagiarism from pseudo plagiarism.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.178-178
• /
• 2022

일반적으로 하천은 상류에서 하류로 흐르지만, 하구에서 일어나는 해안으로부터의 염수의 역류 혹은 상류에서 홍수 발생 시 순간적으로 나타나는 역류 등 주 흐름을 거스르는 흐름이 종종 발생하는데 이는 예상치 못한 피해를 가져올 수 있으므로 최대한 방지해야 한다. 즉, 양방향 흐름이 일어나는 지역을 단방향 흐름으로 바꿔줄 수 있는 수리 구조물의 설치가 필요하다. 역방향 흐름을 제어하는 대표적인 예로는 보가 있는데, 보는 충분한 수위 확보뿐만 아니라 하구에서 역류하는 해수를 방지하는 역할도 한다. 다만, 상류와 하류를 수직적으로 분리함에 따라 물고기의 자유로운 이동을 제한하는 등 생태계를 단절시키는 부작용이 나타날 뿐만 아니라, 최근 정부의 정책에 따라 세종보, 죽산보 등의 보 해체 결정이 이루어지면서 이를 대체할 방안이 필요하다. 따라서 이번 연구에서는 수직적인 구조물이 아닌 수평적인 수리 구조물을 고안함으로써 생태계에 큰 영향을 주지 않으면서 가장 효과적으로 양방향 흐름을 제어할 수 있는 구조물 설계 모형을 탐구해보았다. 구조물 설계 아이디어는 심장의 판막에서 고안하였다. 판막은 특정한 방향성을 갖는 구조로 이루어져 있으면서 혈액의 역류를 방지하는 기관으로, 비슷한 방식으로 하천에도 특정 각도를 갖는 구조물의 설치를 통해 단방향 흐름을 유도할 수 있다고 판단하였다. 실제 하천 규모에서의 실험은 불가능하다고 판단, 전산 유체 프로그램 OpenFOAM을 이용하여 가상 수로의 모델링을 진행하였다. 얇은 판 형태의 흐름 제어 구조물을 수로 측면에 각각 설치 후, 같은 조건에서 정방향 흐름과 역방향 흐름에 대해 각각 시뮬레이션을 진행하였다. 이때, 두 흐름의 하류 유량 크기의 차이를 단방향 흐름을 정량화하는 수치로 산정한다. 시뮬레이션은 구조물과 흐름 방향이 이루는 각도, 구조물의 개수 및 간격, 구조물의 비대칭성 등 여러 가지 조건을 바꿔가면서 진행하고, 유속 분포 및 후류의 크기 등의 수리학적 현상을 파악하여 계산 결과를 분석한다. 분석 결과를 바탕으로 하류의 유량 차이가 가장 크게 나타나는 수리 구조물의 조건을 결정하고, 해당 구조물의 실제 적용 가능 여부를 판단한다.