• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.83-90
• /
• 2007

In this paper, we propose an implementation and an algorithm of 'Jitter and Glitch Removing Circuit' for UHF RFID reader system based on ISO/IEC 18000-6C standard. We analyze the response of TI(Texas Instrument) Gen2 tag with a reader using the proposed algorithm. In ISO/IEC 18000-6C standard, a bit rate accuracy(tolerance) is up to +/-22% during tag-to-interrogator communication and +/-1% during interrogator-to-tag communication. In order to solve tolerance problems, we implement the Jitter and Glitch Removing Circuit using the concept of tolerance and tolerance-accumulation instead of PLL(DPLL, ADPLL). The main clock is 19.2MHz and the LF(Link Frequency) is determined as 40kHz to meet the local radio regulation in korea. As a result of simulations, the error-rate is zero within 15% tolerance of tag responses. And in the case of using the adaptive LF generation circuit, the error-rate varies from 0.000589 to zero between 15% and 22% tolerance of tag responses. In conclusion, the error-rate is zero between 0%-22% tolerance of tag response specified in ISO/IEC 18000-6C standard.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.281-290
• /
• 2010

In geographic forwarding algorithms, traditional route maintenance requires mobile nodes periodically exchange beacon messages with their neighbors. In beacon message based forwarding scheme, a longer interval reduces the number of beacons needed, but may result in significant location errors. Conversely, a shorter interval guarantees more accurate location information, but induces control overheads.Therefore, the fixed or dynamic interval scheme based forwarding schemes cannot adapt well to different mobility environments. Also, existing schemes result in the uncertainty of neighbor node's position in the forwarding table of mobile node. Therefore, this paper presents a self-adaptive location checking mechanism based proactive geo-routing algorithm for beacon-based geographic routing. Simulation results show that the proposed routing algorithm not only significantly increases the relay transmission rate but also guarantees the high end-to-end packet delivery in low and high mobility environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.17-23
• /
• 2000

Wireless link has high bit error rate compared with wired link and many users share this limited bandwidth. So it needs more powerful error control code and efficient media access control(MAC) to provide multimedia service reliably. In this paper we proposed efficient MAC frame format based on TDMA using mini-slot for request access. The number of mini-slots is variable based on the result of collision in the previous frame. This dynamic allocation of request mini-slots helps resolve the contention situation quickly and avoids the waste of bandwidth that may occur when there are several unneeded request mini-slots. The simulation results are also presented in terms of channel utilization, call blocking probability and cell transmission delay for mixed traffic environment.

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.1-11
• /
• 2001

Though it is proposed to use Petri net or dynamic FSM methods for the generation of test sequences on some specific protocols, those methods ere unavailable on the cases where the protocol allows faults processing or includes paths in looping which cause errors or endless looping by the explosion of states. The determination of test coverage on the protocol software that has been designed and implemented is difficult by the reason of development periods, technical solutions to support and also economical limitations. It is suggested to generate timely protocol software test sequences on the basis of regular expressions covering the functions of protocol. With this regular expression method, the 38 test sequences of Q.2971 protocol has been generated and also minimized the endless looping problem when dynamic test suites are used by simplifying the test path expressions that denotes loops, According to the works, the suggested method is confirmed as simple and easy compare to the other dynamic test sequence generation techniques. Moreover. the method to search an optional test path whether it Is included or not in the regular path expression is reviewed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.943-950
• /
• 2005

Recently, many of researches on stream transmission for satisfying each of different real-time transmission condition of the multimedia data that demands various service quality through high-speed networks have been studied actively. In this paper, we design a scheme that discriminately reserves the network resources for the transmission of each multimedia application and propose a bandwidth allocation scheme for improving the utilization ratio of free resources. And we also propose a pipelining scheme for providing flexible real-time transmission. The proposed schemes can be used to support a real-time transmission by applying feedback transmission control method based on receiving buffer for guaranteeing the synchronization conditions requested by the multimedia data. Moreover, we propose a transmission control scheme that can take the amount of network resources down to the minimum amount within the range of permissible error-range under the guarantee with no quality degradation simultaneously when the bottleneck is caused by the network congestion. Finally, we propose a dynamic bandwidth smoothing scheme that can smooth the maximum bandwidth to the demand of each video steam for giving continuous transmission to the delay sensitive video steam between senders and receivers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1161-1170
• /
• 2016

In this paper, we provide an authentication technology for verifying dynamic signature made by finger on smart phone. In the proposed method, we are using the Auto-Encoder-based 1 class model in order to effectively distinguish skilled forgery signature. In addition to the basic dynamic signature characteristic information such as appearance and velocity of a signature, we use accelerometer value supported by most of the smartphone. Signed data is re-sampled to give the same length and is normalized to a constant size. We built a test set for evaluation and conducted experiment in three ways. As results of the experiment, the proposed acceleration sensor value and 1 class model shows 6.9% less EER than previous method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.49-56
• /
• 2024

An automated dynamic structural analysis module stands as a crucial element within a structural integrated mitigation system. This module must deliver prompt real-time responses to enable timely actions, such as evacuation or warnings, in response to the severity posed by the structural system. The finite element method, a widely adopted approximate structural analysis approach globally, owes its popularity in part to its user-friendly nature. However, the computational efficiency and accuracy of results depend on the user-provided finite element mesh, with the number of elements and their quality playing pivotal roles. This paper introduces a computationally efficient adaptive mesh generation scheme that optimally combines the h-method of node movement and the r-method of element division for mesh refinement. Adaptive mesh generation schemes automatically create finite element meshes, and in this case, representative strain values for a given mesh are employed for error estimates. When applied to dynamic problems analyzed in the time domain, meshes need to be modified at each time step, considering a few hundred or thousand steps. The algorithm's specifics are demonstrated through a standard cantilever beam example subjected to a concentrated load at the free end. Additionally, a portal frame example showcases the generation of various robust meshes. These examples illustrate the adaptive algorithm's capability to produce robust meshes, ensuring reasonable accuracy and efficient computing time. Moreover, the study highlights the potential for the scheme's effective application in complex structural dynamic problems, such as those subjected to seismic or erratic wind loads. It also emphasizes its suitability for general nonlinear analysis problems, establishing the versatility and reliability of the proposed adaptive mesh generation scheme.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.391-393
• /
• 2005

최근 유비쿼터스 네트워크 환경을 구축하기 위해 많은 무선 통신 기술들이 등장하였다. 그 중 무선랜 기술은 쉬운 설치와 저렴한 비용 덕에 폭발적인 보급이 이루어 겼다. IEEE 802.11 표준을 기반으로 만들어진 무선랜은 여러 개의 전송속도를 지원한다. 대표적으로 802.11b는 1, 2, 5.5, 11MbPs의 4가지 전송속도를 지원한다. 낮은 전송속도로 전송을 하면 패킷 전송시간은 증가하지만 비트 에러율은 감소된다. 각각의 전송속도에 따라 다른 패킷 전송 성공률을 갖게 된다. 한 무선랜 AP에 연결된 노드들은 각자 자신의 처리율을 최대화할 수 있는 전송속도를 결정하여 사용하게 된다. 이러한 상황은 전체 시스템 성능에는 문제를 발생시킬 수 있다. 본 논문에서는 각자의 전송속도를 각자가 결정하는 것이 전체 시스템 성능에 문제를 발생시키는 경우를 보이고, 그것을 해결하기 위해 AP가 각 노드의 전송속도를 결정하는 기법을 제안한다. 나아가 무선랜에서의 문제점인 Performance Anomaly 현상을 해결하고, [3]에서 언급된 Inefficient Equilibria 현상도 막아본다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.60-62
• /
• 2015

Dynamic Positioning System(DPS)은 동력, DP control 장치, DP 컴퓨터, 위치참조시스템(PRS), 센서, thruster 시스템 및 DP 운용자(DPO) 7가지로 구성되어 있다. DP 선박은 이들 구성요소들에 문제가 발생하면 그 기능을 상실할 수 있다. 본 연구에서는 2001~2010년까지 10년 동안 IMCA 보고된 DP 선박 관련사고 612건에 대한 분석을 바탕으로 DPS의 7가지 구성요소와 관련된 사고 원인을 파악하고 이들 중 가장 높은 비율을 차지하는 원인을 정성적, 정량적으로 상세 분석하여 요소별 관계와 주요 작용 요소를 확인하고자 한다. 이를 통해 DP 선박의 LOP사과 관련 분석에 있어 베이지안 네트워크의 활용성을 확인해 보았다. 10년 평균 가장 높은 비율을 차지한 DPS 사고원인 요인은 PRS이었으며 이를 전문가 브레인스토밍을 통해 작성된 flowchart를 바탕으로 베이지안 네트워크를 통해 상세 분석해 본 결과 PRS의 각 요소별 조건부 확률 확인할 수 있었다. DP 선박의 drive off를 발생시키는데 주요한 영향을 미치는 것은 DGPS, microwave radar 및 HPR 이었고 DGPS에 주요한 영향을 미치는 에러 요인은 signal blocked, electric components failure, relative mode error 및 signal weak or fail 이었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.363-366
• /
• 2009

변이영상은 두 스테레오 영상의 시차에 의해 발생하는 각 화소의 변위를 수록한 영상이다. 이 영상은 깊이영상을 생성하여 시점 간 가상영상을 생성하는데 사용된다. 따라서 변이영상은 다시점 비디오 서비스와 직접적인 연관이 있다. 본 논문에서는 유일성(uniqueness)제약과 순차성(ordering) 제약을 사용하여 기준영상과 참조영상 사이의 관계를 이용하여 생성한 변이 공간 영상(DSI : disparity space image)으로부터 비용 행렬을 계산하여 최적의 변이 경로를 찾아가는 다이내믹 프로그래밍을 분석 하였다. 다이내믹 프로그래밍은 정밀한 변이 맵을 얻을 수 있고, 다른 방식들에 비해 연산 속도가 빠르다는 장점을 가지고 있지만, 영상의 화소값의 변화가 없는 영역에서 이전의 경로를 계속 유지하려는 성질에 때문에 발생 하는 오류확산과 가려진 (occluded) 영역에 의한 오차로 인해 정확한 경로를 찾을 수 없는 경우가 빈번히 발생 하여 에러율이 높아지는 단점을 가지고 있다. 이러한 이론을 토대로 기존의 기법들에 비하여 정확도가 우수한 기법들을 제안하였다. 개선된 역 추적 과정을 이용하여 기존의 다이내믹 프로그래밍 기반의 스테레오 정합 기법들보다 우수성이 뛰어난 결과들을 나타내었다.