• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.315-325
• /
• 2017

This study aims to provide information for the design and use of structural lightweight concrete (SLWC) for floating concrete structures in a marine environment. An experimental program was set up and comprehensive experimental campaign were carried out to determine SLWC mix proportions that can satisfy specified concrete strength, density, and slump values all of them were determined from previous research. Comparisons with previous SLWC mix designs that have been utilized for actual floating concrete structures were made. Key aspects needed to be considered regarding to the use of SLWC for floating marine concrete structures were discussed.

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.219-232
• /
• 2005

With the rapid progress of computer technology in recent years, a digital video data has been used in many applications. As a result, various technologies have been introduced to discover knowledge embedded in a video database. However, few researches on data mining for a video database have been performed due to the unclear boundary of the information in a large amount of a video stream. This paper proposes an efficient generation method of a feature profile in a set of similar video data. To extract the information embedded in original video data efficiently, several refinement techniques are also presented. These methods include merging pixels, restricting preferred areas, removing noises under a minimum repeat factor, extracting important key frames, generating derived blocks and applying weights to dynamic and static areas differently. Finally, the performance of these methods is evaluated by comparing a result profile obtained by a data mining process with original video streams.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.474-483
• /
• 2018

In this paper, we propose a multi-scale high dynamic range (HDR) tone mapping algorithm using guided image filter (GIF). The GIF is used to divide an image into a base layer and a detail layer, then the range of the detail layer is reduced with a compression function to enhance the detail information of the image. However, in most cases, an image includes the detail and edge information in different scales. That is to say, it is difficult to represent all detail features under a certain scale, and a single-scale image decomposition method is not free from artifacts around edges. To solve the problems, the multi-scale image decomposition method is proposed. It utilizes the detail layers of several scale to determine how much edge is preserved. Experiment results show that the proposed algorithm has better image performance in preserving edge compared to conventional algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.5
• /
• pp.79-86
• /
• 2005

The Qis visualizational spreadsheet environment is shown to be extremely effective in supporting the organized visualization of multi-dimensional data sets. The Qis consists of the reconfigurative 2D arrangement of spreadsheet elements at run time and each spreadsheet element has a novel framestack. As the feature, it supports 3D data structure of each element on the Qis. It enables the visualization spreadsheet to effectively manage, rapidly organize, and compactly encapsulate multi-dimensional data sets for visualization. Using several experiments with scientific users, the Qis has been demonstrated to be a highly interactive visual browsing tool for the analysis of multidimensional data, displaying 2D and 3D graphics, and rendering in each frame of the spreadsheet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.11
• /
• pp.919-927
• /
• 2013

In this paper, we present a perception-based tone mapping technique using histogram modification for displaying high dynamic range image. HDR (high dynamic range) tone mapping algorithms are used to display HDR image on LDR (low dynamic rnage) devices. Although perception-based tone mapping methods provides better performance, it dose not always produce good results for a wide variety of images. The proposed method reduces dynamic range by using the perception-based tone mapping function and histogram modification. A derivative of perception-based tone mapping function is used as constraint function of histogram and additional compensation process is performed. This method not only improves contrast by adopting different constraints on each pixel value, but also preserves more visual details. In order to prevent over enhancement, histogram modification technique is applied. Furthermore, it can control the rate of image contrast using control parameters. Subjective and objective evaluations show that proposed algorithm is better than existing algorithms.

• Geotechnical Engineering
• /
• v.9 no.2
• /
• pp.5-14
• /
• 1993

Weathered granite soil is the most representative as a surface soil in Korea. In this paper, the dynamic properties and settlement characteristics of Korea granite soil are studied through the dynamic triaxial compression tests. The dynamic characteristics are very important on the analysis of the foundations under dynamic loading such as machine vibration and earthquake. Soil samples having different grain sixtes were prepared at the relative densities between 80oA and 90oA and tested to measure shear moduli and damping ratios at each level of shear strain. The measured shear moduli of weathered granite soils showed large variations according to the grain sizes, confining pressures, relative densities and shear strains. Sandy weathered granite had a little larger dynamic properties than the average values of the sand studied by Seed and Idriss. Pot the well compacted granite soils, little residual settlements occured due to dynamic loading.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.186-194
• /
• 2011

Natural fiber/natural rubber composites were fabricated by uniformly compounding natural rubber and cellulose- based natural fiber kenaf and then by compression molding. The effect of kenaf fiber content on their vulcanization behavior, hardness, tensile properties, tear strength and static and dynamic properties was investigated. The contents of kenaf fiber in the composites were 0, 5, 10, 15, and 20 phr, compared to natural rubber and additives. The result indicated that various properties of natural rubber depended on the kenaf fiber content. With increasing kenaf fiber content, the torque for vulcanization of natural rubber was increased whereas the vulcanization time was reduced as well. The hardness, tensile modulus and tear strength of kenaf/natural rubber composites were gradually decreased with the fiber content whereas the tensile strength and elongation at break were decreased. Also, with increasing the kenaf fiber content the dynamic property of natural rubber was changed more greatly than the static property. The loss factor, which is closely related with the damping or absorption of the energy given to natural rubber, was proportionally increased with the fiber content.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.37-44
• /
• 2015

In this paper dynamic deformation of lower hinge of refrigerator is simulated using dynamic finite element analysis while refrigerator is being dropped. The flow stress curves considering velocity dependency of hinge and lower packing material are determined through bending test and compression test at several dropping speeds. The determined material properties and flow stress from reverse engineering were used as input data for refrigerator's drop test using a dynamic finite element analysis software LS-DYNA. Additionally the result between CAE and 3D deformation measurement from real refrigerator drop test are compared and the result shows that the proposed analysis model is very useful to design lower hinge and lower packing endurable to the impulsive drop impact.

• Journal of Broadcast Engineering
• /
• v.27 no.4
• /
• pp.548-560
• /
• 2022

Video based Point Cloud Compression (V-PCC) is one of the compression methods for compressing point clouds, and shows high efficiency in dynamic point cloud compression with movement due to the feature of compressing point cloud data using an existing video codec. Accordingly, V-PCC is drawing attention as a core technology for immersive content services such as AR/VR. In order to effectively service these V-PCC contents through a media streaming platform, it is necessary to encapsulate them in the existing media file format, ISO based Media File Format (ISOBMFF). However, in order to service through an adaptive streaming platform such as Dynamic Adaptive Streaming over HTTP (DASH), it is necessary to encode V-PCC contents of various qualities and store them in the server. Due to the size of the 2D media, it causes a great burden on the encoder and the server compared to the existing 2D media. As a method to solve such a problem, it may be considered to configure a streaming platform based on content obtained through V-PCC content encoding based on SHVC. Therefore, this paper encapsulates the SHVC-based V-PCC bitstream into ISOBMFF suitable for DASH service and proposes a configuration method to service it. In addition, in this paper, we propose ISOBMFF encapsulation and DASH configuration method to effectively service SHVC-based V-PCC contents, and confirm them through verification experiments.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.5
• /
• pp.123-133
• /
• 1996

Recently, the construction of infrastructures has been booming and accelerating to keep up with rapid economic growth. Construction activities and operation of transportation facilities cause unfavorable effects such as civil petitions associated with vibration-induced damages or nuisances. Accordingly, the objective of this study is to develop vibration-controlled concrete using various vibration-controlled mixtures, and also to recycle obsolete materials in part. As the first step to achieve this research, preliminary mix designs have been carried out to obtain an appropriate mix proportion above 200kg/$\textrm{cm}^2$ in uniaxial compressive strength. Test specimen based on the mix proportion selected have been actuated by the impact hammer to investigate their dynamic characteristics. Vibration-controlled mixtures are foam, latex, rubber powder and plastic resin, which have been determined to reduce a vibration by and large. KS F2437 and travel time method have been used to figure out 1st natural frequency and dynamic elastic moduli. Damping ratios have been computed by adopting the polynomial curvefitting method and the geometric analysis method on the frequency response spectrum curve. of which results have been compared and analyzed hereon.