• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.243-258
• /
• 2005

A fully-nonlinear two-dimensional dynamically interfaced nested tidal model has been developed with improved efficiency, usability, relocatability and also adopting different time steps for economizing computational times, which is based on two-dimensional tidal model of Choi(1990) with resolution of $1/15^{\circ}$ inlatitude by $1/12^{\circ}$ in longitude covering the whole Yellow and East China Seas continental shelf. To illustrate the validity and applicability of the present model, numerical model experiment was carried out for tidal distribution in the Yellow Sea and the East China Sea emphasizing the Saemangeum area with enhanced grid system. The results from comparison with observed value showed that the present model gives reasonable agreement. The present modeling system is a relocatable tide forecasting system designed to predict tides at any location within the Yellow Sea and the East China Sea continental shelf sea.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.574-579
• /
• 2016

Grid systems used in previous studies were determined to be valid only if the length between the perpendiculars in a model ship was in the range of 6-8 m, and the maximum dynamic trim angle was smaller than $1^{\circ}$. The application of the grid system to a small fishing boat can create numerical instability because the dynamic trim of small boats is generally larger than $3^{\circ}$, and their Froude numbers are in the range of 0.3-0.8. In the present study, resistances of a small fishing boat were stably obtained by reducing the length between the center of buoyancy and the inlet boundary of the numerical domain, and by refining grid cells vertically in a region that would be swept by a free surface. The effective power of the small fishing boat was predicted based on the ITTC-1978 two-dimensional analysis. By using the results of previous towing tank tests, the coefficient of quasi-propulsive efficiency and the brake horsepower at a design draft were calculated.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.108-109
• /
• 1993

• The Korean Journal of Rheology
• /
• v.9 no.3
• /
• pp.103-110
• /
• 1997

고분자 복합재료 제조방법의 하나인 수지이동성형의 충전공정을 모사하기 위한 수 치모사 코드를 개발하였다. 수지이동성형의 충정공정문제를 수학적 공식으로 표현하기 위하 여 비등방성 다공질체를 통과하는 유동에 대한 이론을 사용하였다. 과도상태로 진행하는 자 유표면의 동적 충전거동을 묘사하기 위하여 수치격자 생성을 포괄하는 경계적합 좌표계의 계산기법을 적용하였다. 이와 아울러 불규칙적인 구저와 다중으로 연결된 금형면의 충전모 사에 저합한 복합격자의 개념을 도입하였다. 복합격자들 간의 가상의 경계에 대해서는 검사 체적 기법을 이용하여 물질보존을 만족시켜 주었다. 임의의 금형 두께와 투과도를 가지는 다수의 금형면이 결합된 두 개의 입구를 지닌 금형을 대상으로 하여 몇가지 예를 시험해 보 았다. 수치모사의결과 복합격자의 개념을 도입한 수치모사 코드는 수지이동성형의 복잡한 충전공정을 보다 정교하게 모사하는데 응용될수 있음을 보여주었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.723-733
• /
• 2011

A numerical method of the CSF(Continuum Surface Force) model is presented for the calculation of the surface tension force and implemented in an in-house solution code(PowerCFD). The present method(code) employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with volume capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The application of the present method to a 2-D liquid drop problem is illustrated by an equilibrium and nonequilibrium oscillating drop calculation. It is found that the present method simulates efficiently and accurately surface tension-dominant multiphase flows.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.315-319
• /
• 1997

In photorefractive crystals, light deflection is achieved by dynamic photorefractive volume grating, which is induced by the interference of two writing beams. In this paper, we implemented and analyzed the light deflector using Ce-SBN:60 crystals, which is doped with CeO$_2$ and photorefractive effect is induced by low intensity. And we measured maximum coupling coefficient, effective charge density, diffraction efficiency as the intensity ratio and response time.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1822-1833
• /
• 1996

As the size and complexity of networks increase, it is difficult to manage the whole network using single network manager, thus it is more resonable to manage the network using several network managers distributed on the network. Security interoperability should be supported among network management systems (NMSs)that use different management policies. In this paper, an algorithm that makes it posible to take a role into a role lattices is suggested to provide security interoperability among NMSs that have their own role lattices. In addition, security constraints are proposed to maintain the confidentiality and integrity of information by dynamically modifying the access rights of roles as the state of a system changes. Also, the security constraints are expressed using ECA rules in this paper.

• Annual Conference on Human and Language Technology
• /
• 2001.10d
• /
• pp.359-364
• /
• 2001

필기 한글문자 인식은 다양한 필기 변형, 자모 간의 접촉과 같은 문제들을 내포하고 있다. 최근 이를 해결하기 위한 방법으로 랜덤 그래프를 이용한 필기 한글 모델링이 제안되었으나, 상향식 정보처리의 한계인 시간 복잡도 문제를 겪고 있다. 영어 단어인식에 관한 인지과학적 연구에서는 하향식 정보처리의 주요한 역할 중 하나로 인식 과정에서의 계산 중복을 없애는 필터링의 역할을 들고 있다. 본 논문에서는 랜덤 그래프를 이용한 필기 한글 모델링을 기반으로 하여 필기체에 나타나는 다양한 변형을 흡수하며, 시간 복잡도를 해결하기 위한 한글 문자의 구조에 바탕을 둔 하향식 정보처리 방법을 제안한다. 제안하는 방법은 모델 발화를 이용한 자모 후보 추출 DP 정합과 동적 격자 탐색을 이용한 문자 후보 탐색, 그리고 문자의 구조적 제약을 이용한 후보 제거 기법을 포함한다. 필기 한글 데이터베이스인 SERI-DB에 대한 예비 실험 결과, 제안한 방법은 인식률의 큰 저하 없이 상향식 정보 처리에 바탕을 둔 기존 방법에 비해 높은 속도 향상을 가져 왔다.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.590-592
• /
• 2008

A spacer grid is one of the most important structural components in a LWR nuclear fuel assembly. The primary considerations are to provide a Zircaloy spacer grid with crush strength sufficient to resist design basis loads, without significantly increasing pressure drop across the reactor core. In this study, the dynamic crush strength analysis and test are carried out for the specimens of a spacer grid assembly.

• Journal of the Korean Society of Visualization
• /
• v.17 no.3
• /
• pp.32-38
• /
• 2019

The dynamic stability of swarms is crucial in preventing collisions in clustered flights and safely moving along a defined path. Although there have been many simulation studies on dynamic stability, there have not been many experimental studies using real clusters due to the difficulty in implementation. In this study, we constructed a particle-lattice structure simulating bird flocks or drone swarms, and conducted experiments within turbulent flow. We identified a criterion that describes dynamically stable particle-lattice structures. The stability increased as this newly defined spatial index increased.