• 대한기계학회논문집A
• /
• 제20권8호
• /
• pp.2468-2479
• /
• 1996

An upper bound solution is obtained to perform the process analysis of hot strip rolling process. The material flows within the roll bite at various geometries and frictional conditions are obtained from finite element analysis and the typical flow pattern which is necessary to determine the kinematically admissible velocity field is assumed. From the kinematically admissible velocity field, the upper bound energy is calculated and the rolling load, angle of neutral point and forward slip ratio at various operational conditions are obtained from upper bound energy. The process analysis of above mentioned parameters at various operational conditions have provided valuable information which is hard to obtain during rolling operation and the predicted ranges of quantitive values from these analyses lie whthin the bound of actual operational data.

• 소성∙가공
• /
• 제8권4호
• /
• pp.364-373
• /
• 1999

For material characterization of semi-solid materials, backward extrusion process, which has been used in forming of hollow-sectioned products, was analyzed by the upper bound analysis in the current study. The existing kinematically admissible velocity field was applied to steady state at which there was no change in the assumed regions of velocity field. For unsteady state, new velocity field, as a function of dead zone angle, was proposed. Through the whole analysis, fiction between die and workpiece was also considered. It has been studied how the process variables, such as friction factor and punch velocity, and material parameters, such as strength coefficient, strain rate sensitivity could affect on analysis results. Finally, by the comparison with the finite element analysis, the reliability and efficiency of the proposed velocity field were discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.598-603
• /
• 2001

For metal forming analysis, upper-bound solution is practical method because the solution is overestimated. It is limited to determine stresses on tools by using upper-bound solution. In this study, new scheme to calculate stresses on tools based on upper bound solution is proposed. To verify the proposed scheme, plane strain drawing has been considered. The stresses on tools obtained by the proposed scheme are compared with results of rigid plastic FEM. And the stresses on tools have been determined by the proposed scheme in the forging within plane strain deformation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.837-841
• /
• 1997

An upper bound elemental technique(UBET) program has been developed to analyze forging load, die-cavity filling and optimum kinematically admissible velocity fields for flashless forging. The simulation for flashless forgings are applied plane and axisymmetric closed-die forging with rib-web type cavity. The kinematically admissible velocity fields for inverse triangular and inverse trapezoidal elements, are used to analyze flashless forging. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load in plane-strain and axisymmetric forging are in good agreement with experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.379-388
• /
• 1999

Au upper bound elemental technique(UBET) program has been developed to analyze forging load die-cavity filling and optimum kinematically admissible velocity fields for flashless forging. The simulation for flashless forgings are applied plane-strain and axisymmetric closed-die forging with rib-web type cavity. The kinematically admissible velocity fields for inverse triangular and inverse trapezoidal elements are used to analyze flashless forging,. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load in plane-strain and axisymmetric forging are in good agreement with experimental results.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.1-12
• /
• 1990

본 연구에서는 자유단조용 프레서를 이용하여 돌출부가 있는 비대칭 중공형단 조 제품을 생산할 수 있도록 금형장치를 설계.제작하고, Fig.1에서 보는 바와 같이 경 사진 돌출부가 있는 비축대칭 복합단조에 UBET를 적용하여 해석하였다. 단조시편은 원주형태를 가지도록 하였다. 즉 원주형 소재가 요구되는 비축대칭 단조제품으로 변 형되는 과정에서 단조하중, 재료가 돌출부를 충만하도록 하는 유동특성, 재료가 돌출 부로 차들어가는 속도 등에 영향을 주는 인자(예:펀치 직경의 크기, 금형 상하면의 각 도)의 특성을 이론적으로 해석하고 실험으로 확인하였다.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.345-352
• /
• 1989

본 연구에서는 3차원 변형형상을 갖는 소재에서 상하금형면의 마찰이 다른 경우에, 작각주 소재와 비직각주 소재(non-prismatic block)에 대해서 적용할 수 있는 동적 가용 속도장(kinematically admissible velocity field)을 유도해 내고자 한다.이론계산에 있어서 가공경화를 고려하기 위해 소성변형 영역을 유한개의 요소들로 나누고 이들 각 요소에 대해서 유효변형도, 유효응력을 계산하여 에너지 소비율을 계산하였다.