• Computational Structural Engineering
• /
• v.2 no.2
• /
• pp.53-62
• /
• 1989

In recent times, the subterranean caverns for storing crude oils and oil products are increasingly needed. The elasto-VIScoplastic DYNamic finite element analysis program(VISDYN) has been developed in order to investigate dynamic responses of the storage cavity. And validity of the program is studied through a numerical example. Mohr-Coulomb yield criterion is adopted and associated flow rule is assumed. Geometrically nonlinear behaviour is taken into account using a total Lagrangian formulation. In dynamic deformation reponses, the difference between the steady state displacements and the unsteady state ones by the static analysis can be neglected.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.6
• /
• pp.185-193
• /
• 1997

본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 (200kg/$\textrm{cm}^2$)이상의 콘크리트 배합비를 찾기 위하여 24배치의 예비실험을 수행하였으며, 선정된 적정배합비에 따른 제진재료를 이용한9개의 진동시험체보를 제작하여 보의 구조적 및 재료적 동적특성 즉 1차 공명진동수와 동적 휨강성 및 감쇠비를 측정하여 제진효과를 조사하였다. 그리고 압축강도에 의한 각 시험체의 균열모멘트를 추정하여 재하하중과 균열모멘트비(M/Mcr)에 따른 하중단계별 동적특성값을 살펴보았다. 제진재료로서는 라텍스(Latex), 고무분말(Rubber Powder)그리고 플라스틱 레진( Plastic Resin)등을 사용하였고, 재료적, 구조적 진동감쇠효과를 파악하고자 KS F2437규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Spectrum 곡선에 대한 Polynomial Curvefitting 방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.2 s.12
• /
• pp.81-88
• /
• 2004

The dynamic instability of snapping phenomena has been studied by many researchers. Few papers deal with dynamic buckling under loads with periodic characteristics, and the behavior under periodic excitations is expected to be different from behavior under STEP excitations. We investigate the fundamental mechanisms of the dynamic instability when the sinusoidally shaped arch structures are subjected to sinusoidally distributed excitations with pin-ends. The mechanisms of dynamic indirect snapping of shallow arches are especially investigated under not only STEP function excitations but also under sinusoidal harmonic excitations, applied i the up-and-down direction. The dynamic nonlinear responses are obtained by the numerical integration of the geometrically nonlinear equation of motion. And using this analyze characteristics of the dynamic instability through the running response spectrum by FFT(Fast Fourier Transform).

• School Mathematics
• /
• v.13 no.1
• /
• pp.19-36
• /
• 2011

This study provides middle school students with an opportunity to construct elementary functions with dynamic geometry based on the proportion between lengths of triangle to activate students' intuition in handling elementary algebraic functions and their geometric properties. In addition, this study emphasizes the process of justification about the choice of students' construction method to improve students' deductive reasoning ability. As a result of the pilot lesson study, this paper shows the characteristics of the students' construction process of elementary functions and the roles the teacher plays in the process.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.395-404
• /
• 2005

This paper presents a reliable numerical procedure for nonlinear time-history analysis of space steel frames subjected to dynamic loads. Geometric nonlinearities of member (P-$\delta$) and frame (P-$\Delta$) are taken into account by the use of stability functions in framed stiffness matrix formulation. The gradual yielding along the member length and over the cross section is included by using a tangent modulus concept and a softening plastic hinge model based on the New-Orbison yield surface. A computer program utilizing the average acceleration method for the integration scheme is developed to numerically solve the equation of motion of framed structure formulated in an incremental form. The results of several numerical examples are compared with those derived from using beam element model of ABAQUS program to illustrate the accuracy and the computational efficiency of the proposed procedure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1988

In this study, a method of nonlinear dynamic analysis of suspension bridges subjected to random wind loads is pre.sented. The nonlinearity considered is the one due to the interaction between the motion of the bridge girder and the tertsion variation of the main cables. The equation of motion is formulated using a continuum approach. The coupling between the vertical and torsional motions are included in the analysis. The equation of motion is solved by using the mode superposition method. The analysis is carried out in the frequency domain utilizing the stochastic linearization technique on to the modal equations. In the linearization procedure, the nonlinear terms are approximated as linear ones with constant terms. The verification of the method has been performed on a case with four modal degrees of freedom. Example analyses are carried out on two suspension bridges for various wind speeds and wind force parameters. Numerical results indicate that, by including the nonlinearity into the analysis, the dynamic responses of the bridges, particularly in the vertical direction, change considerably.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.109-118
• /
• 2012

Few paper deal with the dynamic bucking under the load with periodic characteristics, and the behavior under periodic excitation is expected the different behavior against STEP excitation. A space frame structure has high stiffness with a structure resisting external forces in steric conformation. According to many structural conditions, structural stability problems in the space frame are determined and considered very important. This study seeks to understand the space frame collapse mechanism using the 2-free nodes truss model in order to examine static structural instability characteristics of the latticed dome. According to geometrical shape, the star dome, parallel lamella dome and three way grid dome were selected as models. The models were examined for characteristics of instability behavior according to rise-span ratio(${\mu}$) and shape imperfection.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.243-254
• /
• 1997

When dynamic loads such as mechanical load, wind load, and seismic load, which causing a vibration, acts on the body of the 3-D framework resting on soil foundation, it is required to consider the dynamic behavior of soil-space framework interation system. Thus, this study presents the 3-dimensional soil-interaction system analyzed by finite element method using 4-node plate elements with flexibility, 2-node beam elements, and 8-node brick elements for the purpose of idealizing an actual structure into a geometric shape. The objective of this study is the formulation of the equation for a dynamic motion and the development of the finite element program which can analyze the dynamic behavior of soil-space framework interaction system.

• Journal of the KSME
• /
• v.54 no.2
• /
• pp.41-45
• /
• 2014

이 글에서는 조인트, 부싱, 댐퍼 그리고 구동기 등으로 연결된 일반적 다물체계의 질량, 강성, 감쇠, 기하학적 제원 등에 존재하는 불확실성의 영향을 동적 해석 및 설계 시 어떻게 체계적으로 고려해야 하는지 대표적인 방법을 중심으로 관련 내용을 소개하고자 한다.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.2
• /
• pp.42-50
• /
• 2004

캐릭터 애니메이션 기술의 발달로 가상공간에 애니메이트되는 캐릭터의 수가 점점 증가되고 있으며, 캐릭터 자체 골격구조의 관절 개수와 캐릭터를 덮고 있는 메쉬의 폴리곤 개수도 점점 증가하는 추세이다. 따라서, 실시간 가상환경에서 다수의 캐릭터를 전처리 과정 없이 시뮬레이션할 경우 전체 군중시스템 성능의 저하가 예상된다. 본 논문에서는, 이러한 문제점을 해결하기 위해 모션 다단계(motion level-of-detail) 기법을 제시한다. 모션 단순화 기법은 캐릭터의 움직임을 제어하는 골격(관절)구조와 캐릭터의 형태를 시각적으로 표현하는 기하(메쉬)구조를 단순화 하는 방법으로 기존 동작과 단순화된 동작의 차이를 최소화 한다. 골격구조 단순화를 위한 JPC(joint posture clustering)방법은 특정 관절의 연속된 모션 시퀀스에서의 유사 자세 집단을 추출하여 하나의 자세로 표현하는 방법으로, 모션의 특성에 따라 동적으로 관절을 단순화하여 관절 시뮬레이션 시간을 줄이는 방법이다. JPC방법은 골격구조가 시간에 따라 동적으로 변형되기 때문에 골격구조의 계층구조를 재 구축할 시간이 필요하지만, 기존 동작과 유사성을 잃지 않는 단순화된 동작 생성이 가능하다. 유사 자세 집단을 추출하기 위해 전체 모션 시퀀스에서 관절의 프레임간 자세 차이를 수식화하여 테이블 형태로 구성하고 이를 통해 기존 동작의 유사성을 잃지 않으며 관절의 단순화 율을 최대화 할 수 있는 알고리즘을 제시한다. 또한, 실시간 군중 환경의 성능을 더욱 향상시키기 위해 시간에 따라 변형되는 캐릭터 메쉬의 단순화 기법을 적용한다. 실험결과 모션 다단계 기법은 실시간 군중환경에서 캐릭터의 수가 많고 복잡한 골격구조와 기하구조로 구성된 관절 궤적의 변화가 심하지 않은 동작에 대해 특히 효율적이다.