• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.106-121
• /
• 2008

In this paper, we proposed and designed the protocol for energy efficiency and the center of data aiming at the design of a Multi Location Awareness System that recognizes a shadow site in parking and tunnel, which stands on the basis of CSS(Chirp Spread Spectrum) method using ISM Band of IEEE 802.15.4a that aware close location with wireless RF only. As a result of the protocol measurement, it displays the observation errors of less than 15cm, the data error rate of less than 5%, and can implement the Multi Location Awareness System with maximum length of life for 13.5 days using battery of 3V(1500 mAh).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.71-79
• /
• 2015

This paper proposes a new touch screen sensing method that improves the drawback of conventional single-line sensing methods for mutual capacitance touch screen panels (TSPs). It introduces a dual sensing and voltage shifting method, which reduces the ambient noise effectively and enhances the touch signal strength. The dual sensing scheme reduces the detection time by doubling the integration speed using both edges of excitation pulse signals. The voltage shifting method enhances the signal-to-noise ratio (SNR) by increasing the voltage range of integrations, and maximizing the ADC's input dynamic range. Simulation and experimental results using a commercial 23" large touch screen show an SNR performance of 43dB and a scan rate 2 times faster than conventional schemes - key properties suited for a large touch screen panels. We implemented the proposed method into a TSP controller chip using Magnachip's CMOS 0.18um process.

• Korean Journal of Remote Sensing
• /
• v.16 no.3
• /
• pp.261-279
• /
• 2000

Today, the development of spaceborne Earth remote sensing is characterised by the increasing number and various types of remote sensing satellites, which are being operated in the low altitude and geostationary orbits with the help of rapid development of modern space technologies. It is believed that around 15 countries have programs to own their spaceborne Earth remote sensing systems, and the number of systems will be reached to some tens until the end of 2000 years. It is expected that Korean remote sensing satellites will be launched in sequence according to the national space program. The befinits will be magnificient because of the wide range of application area. Application of remote sensing information to the social infra implies that the potential customers can access the information, mission and the characteristics of the operation, and it is necessary to be supplied more information about systems and mission areas to our domestic users for proper applications. In this review we will survey the applications of the information acquired by the systems of USA, Russia and other countries. In this review we will discussed withing general application area, missions and systems.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.111-116
• /
• 2019

With recent rapid development of computer capabilities, various technologies that can facilitate the interaction between humans and computers are being studied. The paradigm tends to change to NUI using the body such as 3D motion, haptics, and multi-touch with GUI using traditional input devices. Various studies have been conducted on transferring human movements to computers using sensors. In addition to the development of optical sensors that can acquire 3D objects, the range of applications in the industrial, medical, and user interface fields has been expanded. In this paper, I provide a model that can execute other programs through gestures instead of the mouse, which is the default input device, and control Windows based on the lip motion. To propose a model which converges with an Android application and can be controlled by various media and voice instruction functions using voice recognition and buttons through connection with a main client. It is expected that Internet media such as video and music can be controlled not only by a client computer but also by an application at a long distance and that convenient media viewing can be performed through the proposal model.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.1009-1018
• /
• 2019

This paper describes the design and implementation of a rehabilitation medical device based on a EMG measurement. Rehabilitation systems are controlled using BLDC motors and motor drives. The BLDC motor drive controls the operation and the speed controls the drive through the external servo motor. In addition, potentiometer coupled to the outside of the motor transmits information about the position of the load being rotated by the motor. The rehabilitation algorithm is controlled by limiting the maximum angle of 0 to 120 by utilizing the motor according to the user setting stage during the rehabilitation exercise. The walking algorithm compensates motor control for the low leg of the signal using the difference value of the signal obtained with the surface denser attached to both inner muscles. The motor and surface denser are utilized for the walk motion to control the maximum angle of 0 to 80.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.175-179
• /
• 2009

this paper proposes a filter design that makes to be satisfied EMC spec. in reliability test of analogue switch for electronic equipment and air conditioning load unit. A designed electromagnetic wave filter was applied to minimize an mutual interference and surrounding environment and improve the product's quality being satisfied to EMC standard. By simulation, using a spectrum analyzer at the 30MHz~1GHz band, ISO/JASO standard frequency range, and simplified EMI chamber, energy distribution of a specific frequency band was analyzed and the capacity of the element which composed the filter was determined in order to implement the most suitable electromagnetic wave filter.In fact, it was certificated that noise decrease by filter addition to the analogue switch for electronic equipment and air conditioning load unit in Certification Authority, and confirmed that the unit is carried out a normal action without electromagnetic wave interference.

• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.19-25
• /
• 2021

This study proposes a digital twin implementation method through simulation so that the manufacturing process can be optimized in a manual manufacturing site. The scope of the proposal is a knowledge management mechanism that collects manual motion with a sensor and optimizes the manufacturing process with repetitive experimental data for motion recognition. In order to achieve the research purpose, a simulation of the distribution site was conducted, and a plan to create an optimized digital twin was prepared by repeatedly experiencing the work simulation based on the basic knowledge expressed by the worker's experience. As a result of the experiment, it was found that it is possible to continuously improve the manufacturing process by transmitting the result of configuring the optimized resources to the physical system by generating the characteristics of the work space configuration and working step within a faster time with the simulation that creates the digital twin.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.977-985
• /
• 2021

The LiDAR sensor is attracting attention as a key sensor for autonomous driving vehicle. LiDAR sensor provides measured three-dimensional lengths within range using LASER. However, as much data is provided to the external system, it is difficult to process such data in an external system or processor of the vehicle. To resolve these issues, we develop integrated processing system for LiDAR sensor. The system is configured that client receives data from LiDAR sensor and processes data, server gathers data from clients and transmits integrated data in real-time. The test was carried out to ensure real-time processing of the system by changing the data acquisition, processing method and process driving method of process. As a result of the experiment, when receiving data from four LiDAR sensors, client and server process was operated using background or multi-core processing, the system response time of each client was about 13.2 ms and the server was about 12.6 ms.

• Journal of Software Engineering Society
• /
• v.24 no.2
• /
• pp.67-75
• /
• 2011

In order to improve working speed, add more functions and provide better user interface of ASADAL, the AWT based Java application to support FORM Software Product Line Development Methodology; we had to reengineer this application to be Eclipse based plug-in application. In order to improve working speed, add more functions and provide better user interface of ASADAL, the AWT based Java application to support FORM Software Product Line Development Methodology; we had to reengineer this application to be Eclipse based plug-in application. And then, this paper introduces the plug-in developed by applying guidelines presented in the reengineering cases of ASADAL's feature model editor and behavior model editor.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.3
• /
• pp.113-120
• /
• 2010

Content security and privacy protection are important issues in emerging network-based video surveillance applications. Especially, satisfying both real-time constraint and energy efficiency with embedded system-based video sensors is challenging since the battery-operated sensors need to compress and protect video content in real-time. In this paper, we propose a multicore-based solution to compress and protect video surveillance data, and evaluate the effectiveness of the solution in terms of both real-time constraint and energy efficiency. Based on the experimental results with MPEG2/AES software, we confirm that the multicore-based solution can improve the energy efficiency of a singlecore-based solution by a factor of 30 under the real-time constraint.