• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.107-113
• /
• 2005

In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead HTTP(Hyper Text Transfer Protocol) web server, and the system which can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized For sensing the operation condition and change of vehicle the desired data is derived by interfacing ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle valve.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.195-195
• /
• 2011

플라즈마를 이용한 반도체 이온 주입 공정(Plasma Immersion Ion Implantation)에서 이온 도즈량(DOSE) 측정은 공정 신뢰성 및 재현성 확보를 위해 중요하다. 본 연구에서는 도즈량 측정을 위해 패러데이컵과 같이 측정 장비를 챔버에 직접 삽입 시키지 않고 챔버 외부에서 이온 주입을 위한 바이어스 전극의 직류 펄스 전압 및 전류 신호 측정을 통해 실시간으로 도즈량을 추출하는 방법을 개발하였다. 펄스 전압 신호에서 전압 신호 상승, 하강 시간에 의해 발생된 변위 전류와 플라즈마 발생 소스의 RF잡음등을 제거한 후 이온 포격으로 인한 2차 전자 방출 계수를 고려하여 펄스 동작 기간 추출을 통해 실시간으로 측정하는 알고리즘을 구현하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5115-5122
• /
• 2013

This paper has studied about the development and application of landslide collapse prediction real-time monitoring system based on USN to detect and measure the collapse of landslide. The rainfall measuring sensor, gap water pressure sensor, indicator displacement measuring sensor, index inclination sensor, water content sensor and image analysis sensor are selected and these are applied on the test bed. Each sensor's operation and performance for reliability verification is tested by the instrument which is installed in the field. As the result, u-IT based real-time landslide monitoring system which is developed by this research for landslide collapse detection could minimize life and property damages because it makes advance evacuation with collapse risk pre-estimate through real-time monitoring on roadside cut and bedrock slopes. This system is based on the results of this study demonstrate the effect escarpment plan are spread throughout.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1287-1294
• /
• 2021

This paper is a study on the implementation of a sensor-based smart compression system for improving home and street environments. Since modernization, the amount of garbage has been increasing every year, and this has seriously adversely affected not only people but also ecosystems such as marine pollution and soil pollution. In particular, in large cities with large floating populations, garbage is dumped on the streets without proper measures to deal with the amount of waste generated. In order to improve this problem, this paper intends to implement a system with automatic compression and opening/closing functions using sensors. This system is designed to activate automatic opening/closing function through an infrared sensor, and automatically opening and closing when the inclination is changed using an impact sensor. In addition, by installing a distance sensor, the amount of internal waste can be easily monitored from the outside, and a manual compression switch and a manual opening/closing switch is separately designed to enable opening and closing and compression as needed to increase the effectiveness.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.2
• /
• pp.97-104
• /
• 2011

This paper deals with the quick and precise disaster prevention automation system (DPAS) based on information communication technology (IT) that detects fire and disasters in the building automatically and quickly and then activates the facilities to extinguish fire and disasters, monitoring such situation in a real time through wire-wireless communication network. The proposed DPAS is applied a programmable logic controller (PLC) of one-chip type which is smallsize and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLC analyzes detected signals from sensors in a case of fire and disasters, then activates fire extinguishing facilities for rapid suppression. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication. The transferred data sounds an emergency alarm signal, and operates a monitoring program. The proposed DPAS based on IT will minimize the life and wealth loss from rapid measures while prevents fire and disasters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.996-997
• /
• 2010

This paper is designed for disinfection and sterilization devices, devices based on the monitoring operation to detect the internal fault diagnosis and design a disinfection device Sterilization device monitored the internal state of the TCP / IP-based communications using Ethernet can be managed remotely, the system presented.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.3
• /
• pp.113-120
• /
• 2018

In this study, we proposed a monitoring system for identifying and handling faulty sensing stream data on manufacturing equipments where low-cost sensors can be safely used. Low cost sensors will lessen the cost of implementing distributed monitoring system, but suffer from sensor noises and inaccurate sensed data. Therefore, a distributed monitoring system with low cost sensors should identify faulty signal data as either of sensor fault or machine fault, and filter out faulty signals from sensing fault. To this end, we adopted a fourier transform based diagnostic approach mixed with a weighed moving averaging method, in order to identify faulty signals. We measured how effective our approach is and found out our approach can filter out one-third faulty signals from our experimental environment. In addition, we attached wireless communication modules to reduce sensor and network installation cost. To handle massive sensor data efficiently, we employed unstructured data format with NoSQL based database.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.303-305
• /
• 2019

다양한 IoT 장비를 모니터링 하고 제어할 수 있는 gateway system을 설계하고 구현할 수 있었다. 본 연구는 효율적으로 스마트홈을 구축하기 위한 방안 및 방향을 제시하고자 한다. 현재의 스마트 홈 케어솔루션은 공기질 측정, 온/습도 측정, 동작 감지, 음성제어 장치 등 다양한 IoT 장치들을 사용하지만 사용자에 따라 필요성이 떨어지는 기능들이 존재한다는 단점이 존재한다. 이러한 이슈를 해결하면서 편리한 스마트홈을 구축할 수 있도록 plug and play 기술을 이용해 집안에서 사용하는 다양한 IoT 기능들을 사용자가 직접 선택할 수 있는 gateway system으르 제시하고자 한다. 저비용 고효율의 효율적 시스템을 구성할 수 있는 IoT 센서와 아두이노 및 라떼판다를 활용해 다양한 IoT 장비들을 모니터링하고 분석하여 쾌적하고 경제적인 스마트홈을 구축할 수 있는 방향을 제시할 수 있었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.39-42
• /
• 2023

최근 온라인 게임 산업이 급속도로 확장됨과 더불어 Gamebot과 같은 비정상적인 프로그램으로 인한 게임 서비스 피해사례가 급격하게 증가하고 있다. 특히, 대표적인 게임 장르 중 하나인 FPS(First-Person Shooter)에서 Aimbot의 사용은 정상적인 이용자들에게 재미 요소를 잃어버리게 하고 상대적 박탈감을 일으켜 게임의 수명을 줄이는 원인이 된다. 비정상 게임 이용자의 근절을 위해서 메모리 변조 및 불법 변조 프로그램 접근 차단 기법과 불법 프로그램 사용의 패턴 모니터링과 같은 기법들이 제안되었지만, 우회 프로그램 및 새로운 패턴을 이용한 비정상적인 프로그램의 개발에는 취약하다는 단점이 있다. 따라서, 본 논문에서는 정상적인 게임 이용자의 패턴만 학습함으로써 비정상 이용자 검출을 가능하게 하는 딥러닝 기반 단일 클래스 분류 기법을 제안하며, 가장 빈번하게 발생하는 치트(Cheat) 유형인 FPS 게임 내 Aimbot 사용 감지에 초점을 두었다. 제안된 비정상 게임 이용자 감지 시스템은 정상적인 사용자의 마우스 좌표를 데카르트 좌표계(Cartesian coordinates)와 극좌표계(Polar coordinates)의 형태로 패턴을 추출하는 과정과 정상적인 마우스 동작 기록으로 부터 학습된 LSTM 기반 Autoencoder의 복원 에러에 따른 검출 과정으로 구성된다. 실험에서 제안된 모델은 FPS 게임 내 마우스 동작을 기록한 공개 데이터셋인 CSGO 게임 데이터셋으로 부터 학습되었으며, 학습된 모델의 테스트 결과는 데카르트 좌표계로부터 훈련된 제안 모델이 비정상 게임 이용자를 분류하는데 적합함을 입증하였다.

• Journal of Satellite, Information and Communications
• /
• v.8 no.3
• /
• pp.15-19
• /
• 2013

Lithium-ion batteries have been used for high density energy storage system due to the features such as low self-discharge rate. And the unit cell battery with the voltage less than 4V is recommended to use the series connections for a high voltage charger. When batteries are charged or discharged with series connection, there may be an explosion or degradation of unit cell battery owing to undistributed internal resistance of cell battery. therefore, the voltages of unit cell batteries should be monitored to prevent an overcharging and a deep discharging. This paper introduces the implementation of CVM (Cell Voltage Monitoring) system that can transmit the 12 channel's information including voltages and temperatures with the 12-bits resolutions and the transmission speed of 192 kbps.