• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.177-183
• /
• 2006

IMO and ITU-R have done an intensive study to develop performance standards and technical standards of maritime digital communication systems, respectively. In particular, each administration strives to develop new agenda items of adopting digital new technologies. IMO COMSAR submitted draft performance standard of LRIT to IMO MSC, so that IMO mandates carriage requirement of LRIT In addition to that, COMSAR is preparing performance standard of AIS-SART, and approved the utilization of mobile phones for SAR activities. On the other hand, a new agenda item concerning E-navigation strategy was submitted to MSC 81th meeting. These challenges toward enhanced maritime radio communication systems would make it change largely the concepts of traditional navigation We suggest future directions of maritime information communication systems, investigating the study results of IMO and ITU-R.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.32-39
• /
• 2006

5.8GHz DSRC(Dedicated Short Range Communications) is a short to medium range communications service that supports both public safety and private operations in roadside to vehicle and vehicle communication. However the 5.8GHz frequency may cause the shadowing effect or communication blocking problem when there is an obstacle or another vehicle between RSE (Road Side Equipment) and OBE (On Board Equipment). In this paper, to solve this problem of the 5.8GHz DSRC, we propose a relay protocol based on the standard of DSRC radio communication between RSE and OBE in the 5.8GHz band made by TTA (Telecommunication Technology Association). By using the proposed relay protocol to DSRC system and intervehicle communication, we also consider a fixed relay protocol and mobile relay protocol. We expect to apply this relay protocol for the DSRC intervehicle communication and video communication between drivers and safe distance among vehicles in the near future.

• Progress in Medical Physics
• /
• v.22 no.3
• /
• pp.148-154
• /
• 2011

The quality factors ($k_{Q,Q_0}$) were evaluated by appling the results recently studied for the effect of central electrode in TRS-398 protocol. The PTW-31010 and IBA-CC13 chambers were used in this study. The quality factors were calculated as a function of beam quality for high energy electron and photon beams and compared with data currently used in TRS-398 protocol. In the PTW-31010 chamber using aluminium electrode, appling the new central electrode collections, the quality factors were 0.4% and 0.9% higher than current TRS-398 data for high energy photon and electron beams respectively. In the IBA-CC13 chamber using C-552 electrode, there are no variations in quality factors compared to TRS-398 data currently used.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.122-130
• /
• 2008

In many applications of wireless sensor networks, sensed data can be classified either normal or urgent data according to its time criticalness. Normal data such as periodic monitoring is loss and delay tolerant, but urgent data such as fire alarm is time critical and should be transferred to a sink with reliable. In this paper, by exploiting these data characteristics, we propose a novel energy-efficient data-aware routing protocol for wireless sensor networks, which provides a high reliability for urgent data and energy efficiency for normal data. In the proposed scheme, in order to enhance network survivability and reliability for urgent data, each sensor node forwards only urgent data when its residual battery level is below than a threshold. Also, the proposed scheme uses different data delivery mechanisms depending on the data type. The normal data is delivered to the sink using a single-path-based data forwarding mechanism to improve the energy-efficiency. Meanwhile, the urgent data is transmitted to the sink using a directional flooding mechanism to guarantee high reliability. Simulation results demonstrate that the proposed scheme could significantly improve the network lifetime, along with high reliability for urgent data delivery.

• Research in Plant Disease
• /
• v.14 no.3
• /
• pp.214-218
• /
• 2008

Coleosporium neocacaliae, a needle rust fungus, was described and illustrated for the first time on the needles of Pinus koraiensis (Korean pine) in Korea. Detailed descriptions of the species were verified based on symptoms and signs, and light and scanning electron microscopic observations on aecia, aeciospores and peridial cells. The present needle rust fungus was apparently different from C. eupatorii, a solely recorded Coleosporium species on P. Koraiensis in Korea until this time, in having comparatively large sized aeciospores as $20-39{\times}14-27\;{\mu}m$ than those of latter species (size of aeciospores $15-27{\times}10-20\;{\mu}m$). Verrucose surface structure of aeciospores in light microscopy was revealed to be annulated with three to four rings and root-like base in scanning electron microscopy. Aecial stage of C. neocacaliae were formed on the middle days of April to the early days of June and collected around the central parts of Korean peninsula, including high mountains of about 1,000 m above sea level.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.66-79
• /
• 2009

In this paper, we propose a new adaptive intra coding technique using 1-D and 2-D integer transforms for improving coding efficiency of H.264/AVC. Proposed technique selects the most effective transform and prediction mode for each block after processing 1-D and 2-D transforms of all prediction modes. In case of using 1-D transform, $4{\times}4$ block is divided into four $1{\times}4$ or $4{\times}1$ subblocks and then each subblock is predicted and subtracted by using the decoded subblock located at the nearest position in the direction of prediction. After prediction error subblock is processed by 1-D transform and quantization, four subblocks are merged back into original $4{\times}4$ block and then, reordered as 1-D signal by a DC biased zigzag scanning pattern according to the prediction mode. Finally, comparing the coding efficiency between bitstreams based on 1-D transform and conventional 2-D transform, prediction mode and quantized coefficients for each block are decided and corresponding quantized coefficients are transmitted. Experimental results show that the proposed adaptive technique increases 0.34dB in BD-PSNR and decreases 4.03% in BD-Bitrate on the average compared with H.264/AVC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.1-6
• /
• 2007

In wireless mesh networks (WMNs), the end-to-end throughput of a flow decreases drastically according to the traversed number of hops due to interference among different hops of the same flow in addition to interference between hops of different flows with different paths. This paper proposes a distributed multi-channel assignment scheme based on hops (DMASH) to improve the performance of a static WMN. The proposed DMASH is a novel distributed multi-channel assignment scheme based on hops to enhance the end-to-end throughput by reducing interference between channels when transmitting packets in the IEEE 802.11 based multi-interface environments. The DMASH assigns a channel group to each hop, which has no interference between adjacent hops from a gateway in channel assignment phase, then each node selects its channel randomly among the channel group. Since the DMASH is a distributed scheme with unmanaged and auto-configuration of channel assignment, it has a less overhead and implementation complexity in algorithm than centralized multi-channel assignment schemes. Simulation results using the NS-2 showed that the DMASH could improve remarkably the total network throughput in multi-hop environments, comparing with a random channel assignment scheme.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.91-98
• /
• 2021

The installation and performance test of the ISOL (Isotope Separation On Line) system for the generation and separation of Rare Isotopes (RI) beams is in progress at the Rare Isotope Science Project (RISP), Institute for Basic Science (IBS). The various RI beams generated by the ISOL target/ion source go through the beam lines and separators, and only the RI beam desired by the user is selected and transmitted to the superconducting linear accelerator at the downstream of the ISOL. In the ISOL system, two separators are installed to separate a specific RI beam, and control is performed by the Experimental Physics and Industrial Control System (EPICS). In this study, an EPICS IOC (Input-Output Control) was developed to measure the magnetic field of a dipole magnet for mass separation of a multivalent (n+) RI beam in the A/Q separator, which is one of the ISOL RI beam separators. The operational stability of the A/Q separator was tested through a magnetic field measurement using a Hall probe.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.141-149
• /
• 2022

With the development of artificial intelligence and unmanned technologies, the remote surveillance/autonomous driving systems have been actively researched. For an effective performance analysis of the developed remote control system, it is important to record the data of it in real time. In addition, in order to analyze the performance between the control system and the remote system, the recorded data from them should be synchronized with time. In this paper we proposed a novel time synchronization method for the remote control system. The proposed remote control system satisfies the time difference of the recorded data within 1 ms, and we can reduce the time difference by using a CPU shielding and affinity setting. The performance of the proposed method was proved through various network data storage experiments. And the experiments confirmed that the proposed method can be applied to recording devices of unmanned ground vehicles and control vehicles. The proposed method will be used as a method for analyzing network data of UGV-R (Unmanned Ground Vehicle - Reconnaissance).

• Journal of the Daesoon Academy of Sciences
• /
• v.49
• /
• pp.365-399
• /
• 2024

Tang Taizong was regarded as the emperor with the idea of cherishing the common people, paying close attention to his subjects' military service, and mobilizing of the people as recorded in Zhenguan Zhengyao (Essentials for Government), from the Zhenguan period during the reign of Tang Taizong. Contrary to the above, in reality, Li Shimin, the name of Tang Taizong, mobilized many subjects in the construction of Luoyang Palace in second capital city called Dongdu and Jiucheng Palace, a summer palace during Sui-Tang dynasty, and he requisitioned the subjects of Guannei Province and Longyou Province to install and protect provisional powers and a county in the Gaochang Kingdom. Given his antinomic behavior, the evaluation of Li Shimin as an ideal Confucian monarch should be reconsidered based on Zhenguan zhengyao and other historical records. Dividing the 19 years before Goguryeo-Tang War in 645 into two periods, from the throne to 637 and from 639-644, the subjects were burdened by the construction of Luoyang Palace and Jiucheng Palace in the former period. In the latter period, after the conquest of the Gaochang Kingdom, there was a requisition for the transport of troops and supplies to be stationed in Xizhou, a reorganized prefecture and counties in the Gaochang Kingdom territory; probably mainly limited to the provinces of Guannei and Lungyou, which were geographically close to the West Regin that is now known as Xinjiang Uygur Autonomous Region. The burden in the latter period was relatively less than in the former period. Even so, the number of households in 639, fourteenth year of Tang Taizong's reign, was only 34.1% and 26.8%, respectively, in 609, the sixth year of Sui Yangdi's reign. In this situation, Taizong's Goguryeo Invasion was not conducted in an economically situation during the early days of the Tang Dynasty.