• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.258-270
• /
• 2014

In this paper, we investigate channel capacity of two kinds of uplink OFDMA (Orthogonal Frequency Division Multiple Access) schemes, i.e. ZCZ (Zero Correlation Zone) code time-spread OFDMA and sparse SC-FDMA (Single Carrier Frequency Division Mmultiple Access) robust to access timing offset (TO) among multiple users. In order to reflect the practical condition, we consider not only access TO among multiple users but also peak to average power ratio (PAPR) which is one of hot issues of uplink OFDMA. In the case with access TO among multiple users, the amplified signal of users by power control might affect a severe interference to signals of other users. Meanwhile, amplified signal by considering distance between user and base station might be distorted due to the limit of amplifier and thus the performance might degrade. In order to achieve the maximum channel capacity, we investigate the combinations of transmit power so called ASF (adaptive scaling factor) by numerical simulations. We check that the channel capacity of the case with ASF increases compared to the case with considering only distance i.e. ASF=1. From the simulation results, In the case of high signal to noise ratio (SNR), ZCZ code time-spread OFDMA achieves higher channel capacity compared to sparse block SC-FDMA. On the other hand, in the case of low SNR, the sparse block SC-FDMA achieves better performance compared to ZCZ time-spread OFDMA.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.517-521
• /
• 2006

네트워크 가상현실 시스템은 먼 거리에 떨어진 사용자들 사이에 일관성 있는 가상 세계를 제공하며, 군사, 오락, 건축 등 여러 부분에 응용되고 있다. 본 논문에서는 그 동안 고성능 그래픽 워크스테이션 환경에서 중심적으로 연구되어 왔던 네트워크 가상현실 시스템을 가장 보편적인 플랫폼인 네트워크 환경에서 구현할 때 생기는 3차원 그래픽 처리 성능의 문제 등과 같은 이에 대한 해결책들을 제시하고 미로 환경과 지형 환경에 근거한 가상 세계를 응용 실험 대상으로 삼아 성능을 분석하였다. 실시간으로 상호 작용하는 어플리케이션은 성능을 유지하면서 모든 참가자들에게 동일한 뷰를 보여주는 것이 중요하다. 동일한 뷰를 제공하기 위해 참가자들이 전송하는 이벤트마다 재생 지연 시간을 설정하고, 수신한 이벤트에 대해서는 예정 재생 시각까지 버퍼에 저장하여 모든 참가자들이 동시에 이벤트를 실행하도록 하는 기법이 제안되어 왔다. 그러나 네트워크 트래픽이 동적으로 변하므로 네트워크 상에서 발생하는 전송 지연 시간도 동적으로 변화한다. 그러므로 고정된 재생 지연 시간을 사용할 경우, 네트워크 트래픽 감소에 따라 상호 작용 성능을 향상시킬 수 있는 기회를 상실하게 되고, 네트워크 트래픽 증가에 따라 이벤트 손실률이 크게 증가하게 되어 참가자들 간에 일치하지 않는 뷰를 초래하게 된다. 네트워크 트래픽이 적어서 전송 지연 시간이 짧을 경우 짧은 재생 지연 시간을 적용하여 상호작용 성능을 높여주고, 트래픽이 많은 경우에는 재생 지연 시간을 늘림으로써 상호 작용 성능을 해치지 않는 범위에서 이벤트 손실률을 줄인다. 실험을 통하여 제안하는 기법의 성능을 평가하였으며 그 결과 본 동기화 기법이 고부하(heavily loaded) 네트워크 상태가 지속되는 동안 기존 기법에 비해 참가자들에게 일치된 뷰를 제공할 수 있고, 저부하(lightly loaded) 네트워크 상태에서는 상호 작용 성능을 향상시킬 수 있다는 것을 확인하였다.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.23-34
• /
• 2018

This paper presents the high efficiency and high power-factor power supply for LED lighting equipment. The proposed power supply is the single-stage power structure consisted of the full-bridge diode rectifier and flyback converter, and thus the power-factor correction and output voltage regulation are performed simultaneously using only one controller IC and one power semiconductor switch. Furthermore, the proposed power supply reduces the voltage stress and switching loss of main switch using the regenerative snubber, and it improves the system efficiency using the synchronous rectifier. The applied synchronous rectifier is the new voltage-driven type and its operation and construction are simple. In this paper, the operation principle of proposed power supply is explained through the operation analyses of its power-factor correction and main power conversion parts and the operation of synchronous rectifier is described, briefly. Also, a design example of the power circuit of 40W-class prototype is shown and the operation characteristics of proposed power supply are validated through the experimental results of the implemented prototype by the designed circuit parameter.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.218-222
• /
• 2006

최근 산업현장에서는 작업의 빈번한 변화에 따른 로봇의 재배치, 테스트로 인해 많은 비용이 소모되고 있다. 이러한 문제점의 해결방안으로 OLP(Off-line Programming) 시뮬레이션 시스템이 주목받고 있다. 현재 대부분의 OLP 시뮬레이션 시스템은 하나의 컴퓨터에서 실행되는 하나의 응용프로그램으로 되어있다. 따라서 로봇을 제어하는 시뮬레이션 프로그램이 복잡해지고 시뮬레이션 대상이 되는 작업장의 규모가 커지게 되면 이와 비례하여 시뮬레이션에 소모되는 시간이 늘어나게 되고 이로 인하여 시뮬레이션 진행상황을 실시간에 맞추어 출력하지 못하게 되는 경우가 발생하게 된다. 또한 하나 컴퓨터에서 실행되는 응용 프로그램의 한계로 인해 시뮬레이션 상황을 출력하는 화면크기는 제한될 수밖에 없어지고 여러 작업장의 시뮬레이션 진행상황을 동시에 확인하기가 힘들어 진다. 본 논문에서는 이러한 문제점을 해결하기 위하여 하나의 PC에서 실행되는 OLP 시뮬레이션 시스템을 사용자가 지정하는 로봇의 집합 단위로 네트워크로 연결된 여러 개의 PC에서 실행할 수 있도록 하여 다수의 로봇 제어 프로그램을 실행하는데 걸리는 부하와 시뮬레이션 진행 상황을 출력하는 CAD시스템에 걸리는 부하를 분산 시키고 연결된 여러 PC를 통해 시뮬레이션 진행상황을 자유롭게 확인할 수 있는 구조를 제안하였다. 그리고 시뮬레이션 시스템의 분산화로 인해 발생하는 동기화 문제에 대한 해결 방안으로 기존 시스템에 사용되는 이벤트/사이클 혼합 방식의 로봇 시뮬레이션 시스템의 알고리즘을 분산시킨 방안을 제시하였다.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.187-194
• /
• 2003

Main Memory storage system can increase the performance of the system by assigning enough slack time to real-time transactions. Due to its high response time of main memory devices, main memory resident data management systems have been used for location management of personal mobile clients to cope with urgent location related operations. In this paper we have developed a multi-threaded main memory storage system as a core component of real-time retrieval system to handle a huge amount of readers and writers of main memory resident data. The storage system is implemented as an embedded component which is working with the help of a disk resident database system. It uses multi-threaded executions and utilizes latches for its concurrency control rather than complex locking method. It only saves most recent data on main memory and data synchronization is done only when disk resident database asks for update transactions. The system controls the number of read threads and update threads to guarantee the minimum requirements of real-time retrievals.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1096-1099
• /
• 2019

In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.899-915
• /
• 2003

Delivering rich and continuous media contents robustly over a wide range of network conditions of the wired/wireless Internet is a highly challenging task. To address this challenges, the continuous media applications at the edge of network has become more and more adaptive while the best-effort Internet is slowly progressing towards improved networking services. That is, the role of network adaptive media delivery, which dynamically links the quality demand of application contents to the underlying networking services, has become more crucial. In this paper, we will first review the required network adaptation functionalities seen from the application side: congestion control / rate control, error control, and synchronization / adaptive playout. Then, we start the coverage of networking support issues that helps the realization of network adaptive media streaming - from network support and protocol support toward consolidated support via middleware. Finally, we propose a dynamic network adaptation framework that efficiently leverages its awareness of both media application (including contents) and underlying networking support.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2179-2187
• /
• 1999

To privide multimedia mobile communication services for the users in scattered locations, the application ATM cells efficiently in wireless communications, it is effective to the use TDMA method. However, it is necessary to have methods to compensate the CDV(cell delay variation) caused by the difference between TDMA-ATM and cell stream multiplexing of the users. This paper optimizes the cell control time(Tc) when VBR traffic inputs have MMPP by applying CDV characteristics of time stamp method, which has the most advantages among compensation methods of CDV. This paper suggests a cell stream multiplex method employing time stamp techniques to reduce CDV for wireless suggest method shows that CDV distribution and cell stream multiples rangd can be controlled to 1.2${\times}$Tc which reduced over the VBR service in the TDMA-WATM transmission. This paper also presents evaluation of the suggested architecture obtained simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.65-73
• /
• 2007

This paper presents an on-line correction method of current measurement errors for a pure-integration-based flux estimation down to 1-Hz stator frequency. An observer-based approach is taken as one possible solution of eliminating the dc offset and the negative sequence component of unbalanced gains in the synchronous coordinate. At the same time, the positive sequence component estimation is performed by creating an error signal between a motor model reference and an estimated q-axis rotor flux established by a permanent magnet (PM) in the synchronous coordinate. The compensator utilizes a PI controller that controls the error signal to zero. The proposed technique further contains a residual error compensator to completely eliminate miscellaneous disturbances in the estimated flux. The developed algorithm has been implemented on a 1.1-kW permanent magnet synchronous motor (PMSM) drive to confirm the effectiveness of the proposed scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8933-8939
• /
• 2015

In this paper, we designed a multi humanoid robot control method for performing an exhibition that will maximize the efficiency and user convenience and implementation. In recent years, an increasing number of case and to take advantage of the robots in the field performances and exhibitions, plays, musicals, orchestra performances are also various genres. In concert with the existing small humanoid exhibition to source from outside by using a computer and MP3 player and play, while pressing the start button of communication equipment for the show to start the robot began performing with the zoom. Thus, due to the dual source and robot operation and synchronization does not work well is the synchronization of the start of the concert sound starting point of the robot and robot motion and sound are reproduced separately were frequently occurs when you need to restart the show. In addition, when the center of gravity or lose the robots who were present during the performance problems such as performance or intervene to restart the show. In order to overcome this, in this paper, Multi-small humanoid robot was designed to control the efficiency and the user of the GUI-based human interface S/W to maximize convenience, Zigbee communication to transmit a plurality of data in al small humanoid It was used. In addition, targeting a number of the small humanoid robot demonstrated the effectiveness and validity of the user's convenience by gender actual implementation.