• 제목/요약/키워드: 동선분석

검색결과 381건 처리시간 0.027초

파랑중에서 SWATH선의 부가저항에 관하여 (On the Added Resistance of SWATH Ships in Waves)

  • 전호환
    • 대한조선학회논문집
    • /
    • 제29권4호
    • /
    • pp.75-86
    • /
    • 1992
  • 본 논문에서는 파랑중에서 소수선면 쌍동선(SWATH ship)의 저항증가에 관하여 해석적 및 실험적으로 다루었다. 여러가지 SWATH 모델들이 파고가 높아질수록 총저항이 정수중에서의 저항보다 적어진다는 특이한 현상들이 실험적으로 저자에 의해 보고되었다. 그 원인을 규명하기 위한 첫번째 단계로서 선형화된 3차원 diffraction 이론을 바탕으로 하여 SWATH선에 작용하는 1차 및 2차 힘들을 분석하였다. 또한 파랑중에서 SWATH선의 속도가 대응하는 단동선 및 다른 고속 선형에 비해 월등히 우세하다는 것을 보여준다.

  • PDF

수 10 Gbit/s 모바일 프론트홀 링크에서 색분산에 의한 OFDM 신호 전송성능 열화 분석 (Degradation of OFDM Signal Performance by Chromatic Dispersion in a Several 10 Gbit/s Mobile Front-haul Link)

  • 원용욱;서동선
    • 전기전자학회논문지
    • /
    • 제20권1호
    • /
    • pp.26-30
    • /
    • 2016
  • 본 논문에서는 광섬유 분산에 의한 직교 주파수 분할 다중방식(OFDM: orthogonal frequency division multiplexing)의 부 반송파 신호왜곡에 대해 조사하였다. 광섬유 색 분산은 OFDM 신호 간의 위상차를 발생시키고, 이는 OFDM 신호 왜곡을 유기하는 비대칭 첨두전력대 평균전력 비율을 유기한다. 광섬유 분산의 영향을 확인하기 위한 실험은 직접검출 광 모바일 프론트홀 시스템에서 수행하였다. 4 Gbit/s의 QPSK-OFDM 심볼의 경우, 100 km 전송에서 EVM이 40 %에 도달함을 확인하였다.

발효보중익기탕들의 생물전환성분 분석 (Analysis of Bioconversion Compositions from Fermented Bojungikki-tangs)

  • 김동선;노주환;조장원;마진열
    • 약학회지
    • /
    • 제55권5호
    • /
    • pp.361-366
    • /
    • 2011
  • Traditional herbal medicinal preparation Bojungikki-tang (BJT) is well-known herbal medicine used as tonic. We fermented Bojungikki-tang using nine lactic acid bacteria strains and discovered two remarkably increased compositions from the fermented BJTs using HPLC/DAD analysis. HPLC/DAD-guided fractionation of the increased compositions followed by structure identification using NMR and MS identified liquiritigenin and isoliquiritigenin. These bioconversion compositions were quantitatively analyzed using HPLC-DAD. Liquiritigenin contents were highest in BJTs fermented with L. amylophilus (1.91 mg/g) and L. fermentum (1.89 mg/g), which were increased by 20-fold compared to BJT (0.09 mg/g). Isoliquiritigenin contents were highest in BJTs in fermented with L. plantarum (0.19 mg/g) and L. fermentum (0.19 mg/g), which were increased by 19-fold compared to BJT (0.01 mg/g).

코일 형태에 따른 변압기의 특성 (Characteristics of Transformer as a function of Coiling method)

  • 김현식;김종령;이해연;;오영우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
    • /
    • pp.161-164
    • /
    • 2004
  • 변압기는 권선방법에 따라 많은 특성의 변화를 나타내게 되는데 일반적인 동선의 권선법과 코일형태로 동판을 가공하여 사용하는 평면 권선방법, 그리고 고전류용 변압기에 이용되는 것으로 코어의 권선창 표면을 감싸는 형태의 관형 권선방법의 3가지의 코일 형태 또는 권선방법에 따른 변압기의 특성 변화와 컨버터에 채용되었을 때의 전력효율에 대하여 고찰하였다. 평면 코일을 이용한 변압기는 높은 코일간의 결합도로 인해 가장 낮은 누설인덕턴스와 가장 높은 성능지수 및 결합계수를 나타내었고, 관형코일을 이용한 변압기는 높은 누설특성으로 인해 가장 낮은 성능지수와 결합계수를 나타내었다. 그리고 이들을 DC-DC 컨버터에 채용하여 분석한 결과 평면변압기가 가장 높은 효율을 발휘하였다. 관형변압기는 저전력에서는 높은 누설량으로 인해 효율이 상대적으로 낮지만 출력전력이 증가할수록 상승하는 발열량에 대한 방열효과가 높아 효율의 감소폭이 작아서 고주파 또는 대전류용 변압기 응용이 기대된다.

  • PDF

상주 양진당과 대산루의 동선요소 분석 (Analysis on the moving line of Yangjundang and Daesanru in Sangju)

  • 이승우
    • 한국실내디자인학회논문집
    • /
    • 제17권4호
    • /
    • pp.3-10
    • /
    • 2008
  • In the Western and Oriental architecture, corridor and stairs have not been important from the whole architectural composition. The purpose of this study is to analyze their elements from theoretical viewpoint of modern architecture. The subject of analysis are Yangjindang and Daesanru of the Mid-Chosun Dynasty in Sangju. The conclusions are the followings : First, the moving line in the Western and Oriental architecture has the linear axis, and in general moving axis is straighten in Hanok architecture. But unlike common traditional architecture, the two buildings are right-angled in the moving axies. Second, Toenmaru in Yangjindang is the element of visual experience in the whole architectural space as promenade architecture called by Le Corbusier. On the other hand, Toenmaru in Daesanru plays a role the space of thinking in extending a visual field to the nature than its pure function. Third, the stairs of Yangjindang is diagonal shape with a role of entrance, but that of Daesanru was concealed in the wall as interior step. Yangjindang has two different stairs. One is broad and shallow stairs with ceremonial or public expression, and the other is narrow and steep stairs with unstable or private expression. This paper intends to show the latent architectural possibility of our traditional architecture.

사회연결망 서브그룹을 통한 소매점 상품배치 및 동선 평가: 장바구니 데이터 분석을 중심으로 (An Approach of Product Placement and Path Evaluation Using Social Network Subgroup: Focusing on Shopping Basket Data Analysis)

  • 윤한성
    • 디지털산업정보학회논문지
    • /
    • 제17권4호
    • /
    • pp.109-120
    • /
    • 2021
  • Despite the growing online exposure of retailes, offline retail channels still outperform online channels in the total retail volume of some countries. There is much interest in the physical layout plans of retail stores to expand sales. Product placement that have a large impact on customer purchasing behavior at offline retailers influences customer movement and sales volume. But in many cases, each retailer relies on unsystematic and autonomous product placement. When multiple products are sold with one purchase, the customer's movement for shopping may be evaluated in terms of customer efficiency and additional impulse purchase. In this paper, the social network is applied to sales data of a retail store and the result is used for evaluation of product placement and customer path. The frequent sales product composition was identified using k-core from sales data in the form of shopping baskets. The location was checked for the identified compositions of products, the spatial variance was measured and the customer's path was identified. With these results, the store arrangement of products was evaluated with appropriate improvement directions. The analysis method of this paper can be an alternative analysis approach for better layout of retail stores.

정확한 프로그램 결함 위치 추적을 위한 전-후처리 방법론 (Pre/post-processing Operator Selection for Accurate Program Bug Localization)

  • 김동선
    • 방송공학회논문지
    • /
    • 제27권2호
    • /
    • pp.240-243
    • /
    • 2022
  • 프로그램 결함에 대한 위치 추적은 소프트웨어 유지 및 보수를 위해 필수적인 요소이다. 대부분은 버그리포트가 제출되었을 때, 결함 추적이 개발자들의 수작업으로 이루어지기 때문에 비용 소모가 많은 작업에 속한다. 현재까지 많은 연구자가 해당 작업을 자동화시키기 위하여 노력해 왔지만 보고된 결과에 따르면, 현업에서 사용되기에 아직도 부족한 성능을 보이는 추세이다. 이에, 본 연구에서는 많은 양의 버그 리포트 데이터와 관련 최신 연구들을 분석하여, 기존 연구들이 하나의 전처리 방법을 모든 버그 리포트에 일괄적으로 적용하고, 이런 방법은 위치 추적에 악영향을 준다는 것을 파악하였다. 본 논문에서는 이와 같은 문제점을 해결하기 위해 선택적인 전-후처리 방법론을 제안한다.

연산 작업에 대한 자율 신경계의 반응에 대한 연구 (A Study on the Analysis of Autonomous Nerve System Response for the Computational Task)

  • 하은호;박광훈;김동윤;임영훈;고한우;김동선
    • 감성과학
    • /
    • 제3권1호
    • /
    • pp.63-71
    • /
    • 2000
  • 본 연구에서는 20대의 건강한 남자대학생 45명을 대상으로 작업조건(안정상태, 연산작업상태, 휴식상태, 반복연산작업상태, 연산작업후 아정상태)과 연산레벨(연산작업의 난이도)에 따른 생리신호의 측정을 위한 실험 프로토콜을 제안하고 측정된 생리신호에 대한 분석을 하였다. 연산작업에 대하여 측정된 파라메터에 대하여 1) 정규분포화를 위한 파라메터의 변환 2) 파라메터간의 산관관계의 조사 3) 연산작업에 대한 파라메터의 표준화 4) 작업조건과 연산레벨에 대한 파라메터의 차이에 대한 유의성검정을 하여 연산스트레스를 평가할 수 있는 파라메터를 추출하였다. 연산작업시의 파라메터는 안정산태의 파라메터와 유의적인 차이를 나타내어 연구에 사용된 연산작업이 생리신호의 변화를 발생시키는 것으로 밝혀졌고 연산작업후의 휴식상태에서 측정된 대부분의 파라메터의 갓이 연산작업전의 안정상태의 파라메터의 통계적으로 유의적인 차이가 없어서 본 연구에 사용된 연산작업은 단기적 스트레스를 유발하는 것으로 밝혀졌다. 그리고, 동일한 연산레벨에 대한 연산작업을 반복하더라도 파라메터의 값은 처음으로 연산작업을 할 때의 파라메터의 값과 유의적인 차이가 없었다. 그러나, 연산레벨에 따라서는 Heart Rate, HRV의 LF/HF, HRV의 MF/(LF+HF), Return Map의 분산, 코끝의 Mean Temperature, GSR-Mean과 호흡수는 차이가 있는 것으로 밝혀졌다. 따라서 이들 파라메터를 사용하면 연산스트레스의 강도를 지수화할 수 있을 것이다.

  • PDF

발전소용 CTCS 내 Vortex Promoter 설계 변수에 따른 세척용 스폰지 볼 회수성능 분석 (Analysis of Cleaning Sponge Ball Recovery Performance According to Vortex Promoter Design Parameters in CTCS for Power Plant)

  • 정다운;이승율;김동선;서현규
    • 한국분무공학회지
    • /
    • 제28권3호
    • /
    • pp.126-133
    • /
    • 2023
  • This study analyzes the flow characteristics and sponge ball recovery performance in a ball strainer according to vortex promoter design variables through flow-particle analysis based on actual experiments to derive a method for improving the recovery rate of cleaning sponge balls of CTCS applied to existing power plants. Based on the ball strainer in CTCS used in the power plant, the experiment was conducted by changing the design factor of the improved shape. In addition, flow and particle analysis were performed under the same conditions as the experiment to numerically the flow characteristics and recovery rate in the ball strainer according to the design factor of the vortex promoter. As a result of the study, it was confirmed that the recovery performance was improved by about 3% by changing the design height of the Vortex promoter. And when comparing the difference between maximum and minimum recovery rate, it was found that the effect on the recovery performance increased slightly according to the distance condition compared to the vortex promoter design height condition.

재난상황과 마케팅을 위한 실시간 객체인식 기술기반 출입자 카운터시스템 개발 (Development of visitor counter system for disaster situations and marketing based on real-time object recognition technology)

  • 김영권;정재훈;김재현;강명진;강민성;주휘재;장우현;윤태진
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2021년도 제63차 동계학술대회논문집 29권1호
    • /
    • pp.187-188
    • /
    • 2021
  • 최근 COVID19 상황에서 생활 속 거리두기가 강조되면서 관광지나 다중이용시설 등의 이용객 수와 밀집도를 파악하는 것이 중요해지고 있다. 따라서, CCTV 영상을 활용하여 저렴한 비용으로 다중이용시설의 출입자수에 대한 정보를 실시간으로 모니터링할 수 있는 시스템이 필요하다. 이를 위해 본 논문에서는 딥러닝 실시간 객체인식기술을 활용한 출입자의 수와 동선을 측정하여 출입자에 대한 통계정보를 웹브라우저를 통해 제공하는 시스템을 개발하였다. 실시간 객체인식기술인 YOLOv4와 YOLOv4-tiny 알고리즘을 Nvidia사의 Jetson AGX Xavier 와 데스크톱PC에 적용하여 각 알고리즘의 FPS와 객체 인식률을 비교 분석 하여 알고리즘을 적용하였다.

  • PDF