• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.458-460
• /
• 2006

본 논문은 대면적 자기부상 스태이지의 정밀급 위치제어를 위한 시스템 구성 및 제어 알고리즘에 대한 연구결과를 기술한다. 자기부상 스태이지는 16개의 동기모터에 의해 구동되며, 각 모터의 Moving 부분에 수직방향의 힘과 수평방향의 힘을 모두 발생할 수 있도록 Halbach 구조로 되어 있다. Matlab/Simulink 모델링을 수행하였으며, Simulation 결과를 벼였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1069-1078
• /
• 2013

In this paper, we propose a distributed time synchronization technique for OFDMA- based wireless mesh communication systems. The proposed technique employs the bio-inspired algorithm for self-time synchronization in the physical layer. To achieve the network synchronicity, the proposed technique updates the transmission time and the FFT window using the TDoA information of received signals from the neighbor nodes. The proposed technique can achieve fast self-synchronization among nodes with a simple algorithm, without the need of a centralized controller. The performance of the proposed time synchronization technique is evaluated by simulation in terms of convergence speed and convergence probability.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1104-1108
• /
• 2020

This paper propose a variable proportional resonant feedforward algorithm for reducing the speed ripple of a three-phase permanent magnet synchronous motor. In general, the torque ripples can be generated by electrical pulsation due to current measurement errors and dead time and mechanical pulsation because of rotor eccentricity and eccentric load. These torque pulsations can cause speed pulsations of the motor and degrade the operating performance of the motor drive system. Therefore, in this paper, the factors of the speed ripple is analyzed and an algorithm to reduce the speed ripple is proposed. The proposed algorithm applied a variable proportional resonant controller in order to reduce the specific operating frequency included in the speed pulsation, and utilized a feedforward compensation controller structure to perform the compensation operation. The proposed algorithm is verified through various experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2635-2642
• /
• 2012

MOST(Media Oriented Systems Transport) is a network protocol for vehicle multimedia, where it guarantees large bandwidth and reliability. However, previous MOST device utilized I2C or I2S communication method to data manage or transfer, Bandwidth of MOST have increased and additional equipments are added to one device, requiring a larger form of bandwidth communication method. Therefore, this research suggests of the methods in improving the efficiency of asynchronous data transfer, and suggest an algorithm, which will improve the reliability.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.404-408
• /
• 2006

This paper presents an anti-windup gain selection method for a complex vector synchronous frame PI current controller. The complex vector PI current controller is more robust to the parameter variation than the state feedback decoupling PI current controller. The complex vector PI current controller also includes an integral term, which can results in windup problem when the controller is saturated due to physical limitation of the system. Furthermore, even an anti-windup is utilized, inappropriate gain can deteriorate the performance of the current controller. Therefore, appropriate anti-windup gain selection method for a complex vector current controller has been proposed based on the mathematical description of the current control system. The superior performance of the current control system with the proposed anti-windup gain has been verified by the experimental results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.114-123
• /
• 2005

A nonlinear speed control of a PMSM using a sequential parameter auto-tuning algorithm for servo equipments is presented. The nonlinear control scheme gives an undesirable output performance under the mismatch of the system parameters and load conditions. Recently, to improve the performance, an adaptive linearization scheme, a sliding mode control and an observer-based technique have been reported. Although a good performance can be obtained, the performance is not satisfactory any more under specific conditions such as a large inertia variation, a fast speed transient or an increased sampling time. The simultaneous estimation of principal parameters giving a direct influence on speed dynamics is generally not simple. To overcome this problem, a a sequential parameter auto-tuning algorithm at start-up is proposed, where dominant parameters are estimated in a prescribed regular sequence based on the method that one parameter is estimated during each interval. The proposed scheme is implemented on a PMSM using DSP TMS320C31 and the effectiveness is verified through simulations and experiments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.5
• /
• pp.348-356
• /
• 2003

Active vibration control algorithms for the compensator and proto-type testing system have been developed for the suppression of vibrations from the reciprocating engines. At first, the developed algorithm determines optimal control vibration phases by detecting vibration responses of the engine without and with compensator, and then performs the continuous optimal control functions by tracking the change of the vibration frequency and phase. This algorithm is comparatively simple. robust for the external excitations and needless of supplementary operation since the control process is serially carried out. To validate the performance of compensator and algorithm, testing system including excitation device are constructed and tested, and the reductions of vibration levels are observed over than 80 % of the uncontrolled levels at various frequency ranges.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.15-18
• /
• 2004

본 논문에서는 표면 부착형 영구자석형 동기 전동기(SPMSM)의 가감속과 부하 변동에 따른 속도 특성 향상을 위해 실제 속도와 부하 토크 관측기를 통한 부하 토크를 입력 변수로 설정하여 가변 이득 조절 알고리즘을 제안한다. 제안된 알고리즘을 증명하기 위해 여러 운전 조건에서 기존의 이득 시스템과 가변 이득 조절 시스템을 비교하여 제안된 알고리즘의 효용성을 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.243-246
• /
• 2019

In cognitive radio networks, secondary transmitters should cease its transmission immediately under the detection of primary transmission in the spectrum they are using. Then they need to exploit another idle spectrums and resynchronize to the newly found idle spectrums. Most of related work presume the existence of separate control channel used by secondary users commonly for exchanging the information of idle spectrums. However, this presumption is not feasible in real world cognitive radio scenario. Therefore we address a proactive spectrum synchronization scheme with no need of separate control channel. Our scheme lets secondary users exchange the spectrum information periodically during normal communication process and determine the next spectrum band in advance of detecting primary transmission. We evaluate our scheme in a real world cognitive radio environments set up with USRPs.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.45-51
• /
• 2009

In this paper, a transparency analysis and network-adaptive transport scheme are proposed in order to improve transparency of EBA-based force-reflecting teleoperation. EBA guarantees stability of force-reflecting teleoperation over network delay and loss but has limitation that it cannot overcome transparency deterioration of haptic interactions. The proposed transparency analysis quantifies the force feedback distortion caused by network delay and loss. Based on the analysis, the proposed haptic data synchronization and transmission rate control schemes adapt synchronization delay and transmission rate to current network state for more transparent haptic interaction. Through Matlab/Simulink simulations, it is confirmed that the proposed analysis provides an acceptable quantification method about haptic interaction quality and that the proposed haptic data transport scheme effectively improves haptic interaction quality with respect to network delays and losses.