• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.159-160
• /
• 2009

• Korean Journal of Microbiology
• /
• v.49 no.4
• /
• pp.313-320
• /
• 2013

Biofilm formed on stainless and copper in water treatment plant was investigated for sixteen weeks. Biofilm reactor was specially designed for this study. It was similar to that of a real distribution pipe. Raw water, coagulated, settled, filtered and treated water were used in this study. The average number of heterotrophic bacteria counts was $1.6{\times}10^4CFU/ml$, $5.8{\times}10^3CFU/ml$, $1.8{\times}10^3CFU/ml$, $1.3{\times}10^2CFU/ml$, 1 CFU/ml, respectively. Density of biofilm bacteria formed on stainless and copper pipes in raw, coagulated and settled water increased above $2.9{\times}10^3CFU/cm^2$ within second weeks while more biofilm bacteria counts were found on the stainless pipe than on the copper pipe. In case of filtered water (free residue chlorine 0.44 mg/L), there was no significant difference in the number of biofilm bacteria on both pipes and biofilm bacteria below $18CFU/cm^2$ were detected on both pipe materials after fifth weeks. Biofilm bacteria were not detected on both pipe materials in treated water (free residue chlorine 0.88 mg/L). According to the results of DGGE analysis, Sphingomonadacae was a dominant species of biofilm bacteria formed on the stainless pipe while the copper pipe had Bradyrhizobiaceae and Sphingomonadaceae as dominant bands. In case of filtered water, a few bands (similar to Propionibacterium sp., Sphingomonas sp., Escherichia sp., and etc.) that have 16S rRNA sequences were detected in biofilm bacteria formed on both pipes after fifth weeks. Stainless pipe had higher species richness and diversity than the copper pipe.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.753-760
• /
• 2009

This study analyzed the fluctuation of the construction material cost from 2001 to 2008 in Busan to examine the effect of the fluctuation of the construction material cost on lotting price of the multi family attached house. The major findings are as follow. First, as the result of the analysis on four materials such as reinforced bar, remicon, PHC piles, Copper Tubes, those take largest portion of construction cost, it was found that the there is wide difference in price fluctuation of the each materials. The reinforced bar and Copper Tubes showed high price increase by an average 14.03% and 14.91% per year while remicon, PHC piles remained almost unmoved by an average 0.86% and 2.41%. Second, According to the result of the analysis on the mutuality between the fluctuation of the construction material cost and the lotting price of the multi-family attached house, it was found that the fluctuation of the construction material cost have the most enormous effect on the sale price of the multi-family attached house, when there is 3 month time lag in reinforced bar, remicon, PHC piles, Copper Tubes, commonly. Also this mutuality continues to 6 month, 9 month and 1 year, although it decrease a little bit.

• 월간 기계설비
• /
• s.248
• /
• pp.80-81
• /
• 2011

산업 전반에 걸쳐 다양한 용도로 쓰이는 구리는 우리 설비건설산업에도 적지 않은 영향을 주고 있다. 동관 등 관련 제품만 보더라도 2년여에 걸쳐 꾸준히 가격이 오르고 있고 올해도 하락보다는 상승에 더 무게를 두어야 할 것 같다. 관계자들은 여러 가지로 가격 인상의 근거를 제시하고 있는데, 크게 세가지 정도로 압축할 수 있다. 아래 본문의 그래프를 보면서 좀 더 면밀히 살펴보도록 하자.

• 월간 기계설비
• /
• no.9 s.206
• /
• pp.95-96
• /
• 2007

설비건설업을 하다보면 여러 가지 자재들을 사용해야 한다. 하지만 비슷한 제품을 우리가 시공하는 현장에는 어떤 제품이 적합한 것인지 궁금할 때가 많다. 더욱이 제품 특징 및 단가 등이 알고 싶을 때 일일이 찾아봐야 하는 번거로움이 따른다. 본지는 회원사의 설비자재에 대한 궁금증을 해소하기 위해 지난 6월호부터 특정 자재를 선정하여 제품의 특징, 제품단가, 영업담당자 연락처 등을 담은 '자재의 모든 것'을 게재한다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.322-322
• /
• 2011

본 연구는 동관의 관외착빙형 특성을 조사하기 위한 기초적인 연구로써, 실험의 파라메터와 범위는 브라인의 온도는 -10[$^{\circ}C$], -8[$^{\circ}C$], -6[$^{\circ}C$], 브라인의 유속은1.0[m/s], 1.4[m/s], 1.8[m/s] 그리고물의 초기온도는6[$^{\circ}C$], 9[$^{\circ}C$], 12[$^{\circ}C$] 등으로 설정하였다. 본 논문에서는 무차원 얼음 두께와 무차원 동결 시간의 관계에 대하여 실험적으로 정리 하였다. 브라인온도, 물의 온도, 브라인 유속, 물의 초기온도, 동관의 직경사이즈에 대한 무차원 상관 방정식은 다음과 같이 얻어진다. r+3 = $0.063{\bullet}(t+)+0.206$ [적용범위: R+T+=2.1~4.7].

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.51-52
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.481-482
• /
• 2009

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.94-101
• /
• 2010

The pipes using in water-based fire protection systems are used steel pipes for ordinary piping, carbon steel pipes for pressure service, copper and copper alloy seamless pipes and tubes, etc. By last buildings of high-rising, complexity, in fire protection systems, the corrosion resistance, easy construction, lightweight and cost-effective use of the pipes is being considered. Among the pipes, the possibility of used for fire protection system being used in the existing copper pipe of material properties, strength, corrosion resistance, heat resistance through and compare the performance was evaluated. As a result of that assessment light gauge stainless steel pipes for ordinary piping (KS D 3595) at a water pressure of less than 1.2 MPa can be used in sufficient physical properties, strength, corrosion resistance, heat resistance and have been observed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6C
• /
• pp.231-239
• /
• 2010

This paper presents the thermal conduction analysis (using ABAQUS ver 6.10 and FLUENT ver 6.3.26) of geothermal energy for PHC, steel and copper energy piles by considering subsurface environment, thermal efficiency of grouting materials, and fluid velocity of circulating fluid. Results show that higher thermal efficiency for copper pile is observed followed by steel and PHC piles depending on the grouting materials and subsurface condition. The fluid velocity of 0.6m/s presents most efficient outflow temperature (275.4K) and heat exchange rate (103.1W/m) for the case of PHC pile during 8 hours operation. Analysis of operation schedule concludes that 16 hours of stand-by allows charging geothermal energy following 8 hours operation in winter season is most appropriate with 0.1K of temperature difference from the steady-state condition.