• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1971-1978
• /
• 2009

This study investigated the adsorption of safflower yellow dye on wool protein fiber and the optimum dyeing conditions to test color reproducibility. In addition, the effects of mordants on dye adsorption, color, fastness, and photofading rate were also studied. The prepared dye in powder form was characterized with UV-vis spectroscopy and FT-IR spectrometric analysis. The color of dyed fabrics was characterized by CIE $L^*a^*b^*$ coordinates, H V/C, and K/S values. The color reproducibility of the dyed wool fabrics was examined. The amount of dye adsorption increased and also, the shade of the dyed wool fabrics became deeper and more saturated with increasing temperature, time, and dye concentration. The maximum color strength was obtained at pH 3.0. The shade of dyed wool fabrics ranged from light yellow to dark mustard yellow as the pH of the dye bath shifted from alkaline to acidic. Color reproducibility was reliable with color differences in the range of 0.53~1.75. Fastness to dry cleaning was relatively good at 4/5 rating irrespective of mordanting. Fe and Cu mordants showed the least color change of the dyed wool fabrics after exposure to light. Mordants did not contribute to improve dye uptake and color fastness, although they made variations in color tone. Safflower yellow dye can be used satisfactorily without mordants and will not cause damage to the environment.

• Clean Technology
• /
• v.18 no.2
• /
• pp.191-199
• /
• 2012

In order to reduce or remove off-flavor and volatile organic compounds (VOCs) from Laminaria japonica effectively, continuous treatment process by supercritical carbon dioxide (SC-$CO_2$) was applied. After freeze-drying, Laminaria japonica powdered with $710{\mu}m$ was used. Experiments were carried out at temperature range from 35 to $55^{\circ}C$, and pressure range from 10 to 25 MPa for evaluation of SC-$CO_2$ treatment effect. Flow rate of carbon dioxide used in this reseach was constantly fixed at 26.81 g/min. Before and after treatment of SC-$CO_2$, off-flavor and VOCs from Laminaria japonica were analyzed by gas chromatography-mass spectrometry detector (GC-MSD). Total 47 VOCs emitted from Laminaria japonica were identified before treatment of SC-$CO_2$, major components of seaweed smell (ordor) in Laminaria japonica were identified as alcohols, aldehydes, ester and acids, ketone, halogenated compounds and hydrocarbon. Off-flavor and VOCs in all experimental conditions was reduced or removed after SC-$CO_2$ treatment. Among the experimental conditions, the highest removal yield was at 25 MPa and $55^{\circ}C$.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.675-681
• /
• 2008

This study investigatedthe quality of mashed red pepper after application of various freezing and thawing conditions. Two freezing temperatures ($-70^{\circ}C$, $-10^{\circ}C$), two thawing temperatures ($0^{\circ}C$, $40^{\circ}C$), and two thawing methods (water-thawing, air-thawing), were employed. Changes in levels of capsaicinoids, vitamin C, free sugars, organic acids, and capsanthin were measured. Capsaicinoids, vitamin C,and free sugar contents were lowest in pepper treated at $-10^{\circ}C/40^{\circ}C$ (freezing/thawing), and the loss rates were 38.0, 79.4 and 24.6%, respectively. When thawing methods were compared, chemical contents were higher in air-thawed samples than in water-thawed peppers, but there was a statistically significant difference only in vitamin C content. Free sugar content after $-70^{\circ}C$ freezing were higher than after $-10^{\circ}C$ freezing, irrespective of the thawing method used. Initial citric acid, malic acid, and succinic acid contents were 44.90, 30.76 and 20.65 mg/100 g, and there was no significant difference between peppers treated with different freezing and thawing conditions. It is recommended that the best method for preserving the overall quality of mashed red pepper is freezing at $-70^{\circ}C$ and thawing at $0^{\circ}C$ in air.

• Korean Journal of Food Science and Technology
• /
• v.13 no.4
• /
• pp.314-318
• /
• 1981

In order to improve the storage stability of spray and freeze dried red ginseng extract powder packed in a bottle, the water vapor permeability of Al-foil laminate paper used for cap closure and shelf life of those products on various storage temperatures and relative humidities were investigated. The thickness of the laminate paper was $93{\pm}3\:{\mu}m$ and its physical properties were equal to standard of ASTM (B-377-66) The absorption rate of the freeze dried powder was 2-6 times greater than that of the spray dried powder at $37^{\circ}C$. Therefore it was considered that the laminate could be used for cap closures for the spray dried powder but unsuitable for the freeze dried powder. The shelf life of the spray dried powder was longer than that of the freeze-dried powder at $37^{\circ}C$.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.164-168
• /
• 2005

An experimental design has been used to optimize the analysis of volatile component from fresh ginseng using solvent free solid injector (SFSI). The analysis were performed at three different sample preparing methods (fresh, oven drying and freezed drying), different injector port temperatures (100, 150, 200, 250 and $300^{\circ}C$) and different preheating time (3, 5, 7, 10 and 15 min) according to the above experimental design. The optimum conditions from analytical results were fresh sample (sample preparing methods), $250^{\circ}C$ (injector temperature) and 10 min (preheating time). Ginsengs grown for six years at Gumsan were prepared for fresh, white and red ginsengs. These fresh, white and red singsengs were analyzed for their volatile components by GC/MS equipped with SFSI according to the above the optimum conditions. A total of thirty-three volatile components were identified in fresh ginseng by SFSI, thirty-six in white ginseng and thirty-eight in red ginseng. These results suggested that the SFSI method could be used for isolating volatile component in ginsengs.

• Korean journal of applied entomology
• /
• v.29 no.3
• /
• pp.184-189
• /
• 1990

A nuclear polyhedrosis virus (NPV) of the tobacco cutworm, Spodoptera litura would be a promisible agent for the control of the insect. To develop a viral insecticide using S. litura NPV, effect of spray on soybean leaves, temperature, storage, an sunlight on the pathogenicity of the virus were studies as follows: Median lethal concentration ($LC_{50}$) of the virus sprayed on the leaves against the third and the fifth instar larvae were $1.301\times10^{4 PIBS}/ml$ and $1.087\times10^{5 PIBS}/ml$, respectively. On the concentration of $1.0\times10^{5 PIBS}/ml$, median lethal times ($LT_{50}$) were 7.3 days for the 3rd and 8.9 days for the 5th instar larvae. Stability of S. litura NPV was quickly decreased at the higher temperate than $60^{\circ}C$ and at the longer exposure to the higher temperature. Storage of the virus at $-20^{\circ}C$ was kept higher pathogenicity than $4^{\circ}C$ and $25^{\circ}C$. Viral activity was maintained more than 10 days in the sprayed-under leaves, but decreased at 3 day after spray in th sprayed-on the leaf surface when exposed the virus to sunlight.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.163-170
• /
• 2012

With the advantage of a rapid exothermic reaction property, jet set concrete may be used as a cold weather concrete because it can reach the required strength before being damaged by cold weathers. And it can be hardened more quickly if the field temperature is properly compensated by heating. Because ordinary concrete cannot be hardened well under sub-zero temperatures, anti-freeze agents are typically added to prevent the frost damage and to ensure the proper hardening of concrete. While the addition of a large amount of anti-freeze agent is effective to prevent concrete from freezing and accelerates cement hydration resulting in shortening the setting time and enhancing the initial strength, it induces problems in long-term strength growth. Also, it is not economically feasible because most anti-freeze agents are mainly composed of chlorides. Recent studies reported that magnesia-phosphate composites can be hardened very quickly and hydrated even in low temperatures, which can be used as an alternative of cold weather concrete for cold weathers and very cold places. As a preliminary study, to obtain the material properties, mortar specimens with different mixture proportions of magnesia-phosphate composites were manufactured and series of experiments were conducted varying the curing temperature. From the experimental results, an appropriate mixture design for cold weathers and very cold places is suggested.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.928-934
• /
• 2008

The objective of this study is to investigate the dyeing properties of safflower yellow dye on silk for the standardization of dyeing process and color reproducibility. Yellow colorants were water-extracted from safflower petals, concentrated, and freeze-dried to obtain colorants powder. The effects of dye concentration, dyeing temperature, and pH of dye bath were studied in terms of dye uptake and shade. Fastness to dry cleaning and light was evaluated. Dye uptake increased with raising temperature and brighter and more vivid yellow shade was obtained when dyed at $30^{\circ}C$. As colorants concentration increased, dye uptake increased progressively and the shade got darker and deeper. Maximum color strength was obtained at pH 3.5. It was speculated that the adsorption of colorants seemed to occur mainly by hydrogen bonding and physical force at pH 5.5 and by ionic bonding as well as hydrogen bonding below isoelectric point(pH 3.8-4.0). The results of reproducibility test showed acceptable color difference in the range of $1.11{\sim}2.01$. Washing fastness was fairly good as 4/5 rating, while light fastness was 2/3 rating.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.615-621
• /
• 2009

In order to optimize the supercritical fluid extraction (SFE) conditions of volatile components from the strawberry, we conducted an evaluation of the sample preparation and SFE operating conditions. The analysis of the volatile components extracted by a variety of sample preparation protocols led to the identification of 30, 26, 30, and 34 volatile components in fresh, freeze-dried, 30% celite and 70% celite treatments, respectively. The 70% celite treatment was the most effective in extracting the volatile components from strawberry via SFE. Analysis of the volatile components extracted by a variety of SFE operating conditions yielded identifications of 34, 35, 34, and 35 volatile components at 3,000 psi (40, $50^{\circ}C$) and 6,000 psi (40, $50^{\circ}C$), respectively. The extraction yield of alcohols and acids, and the total volatile component contents, were highest under conditions of 3,000 psi and $55^{\circ}C$. Volatile components from the strawberry were extracted via SFE, simultaneous steam distillation and extraction (SDE), and solvent extraction (SE). The analysis of the volatile components extracted via different extraction methods resulted in the identification of 56, 34, and 32 volatile components in the SDE, SFE, and SE extracts, respectively. The total volatile component contents identified in the SDE, SFE, and SE extracts were $20.268{\pm}1.144$, $21.627{\pm}1.215$ and $2.476{\pm}0.177\;mg/kg$, respectively. The SFE extract evidenced higher contents of sweet flavors such as 2-methylbutanoic acid, 2-methylpropanoic acid, and hexanoic acid than the SDE and SE extracts. SFE proved to be the most appropriate method for the extraction of fresh volatile components from the strawberry.

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.348-355
• /
• 2019

This study investigated the impact of cellulase treatment on the extraction yield of potato starch (PS), and compared the physicochemical properties of PS by conventional (CSE) and enzymatic (ESE) starch extraction. In ESE, the PS extraction yield was predominantly influenced by reaction temperature, time and their interaction, compared to the cellulase concentration. When potatoes were treated for 8 h at $40^{\circ}C$ with 1.5% cellulase, the PS extraction yield was about 3.4-fold higher than that by CSE. Compared to CSE-PS, ESE-PS showed lower total starch contents and higher amylose contents, resulting in lower swelling factors and distorted pasting viscosity profiles accompanied by absence of peak and breakdown viscosities. However, ESE did not affect the gelatinization characteristics of PS. Overall results suggested that ESE can provide the highest yield of PS, and ESE-PS can be a potential starch source for extending the utilization of PS in food industries.