• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.120-129
• /
• 2023

To evaluate the vertical loads on railway bridges, conventional load tests are typically conducted. However, these tests often entail significant costs and procedural challenges. Railway conditions involve nearly identical load profiles due to standardized rail systems, which may appear straightforward in terms of load conditions. Nevertheless, this study aims to validate load tests conducted under operational train conditions by comparing the results with those obtained from conventional load tests. Additionally, static and dynamic structural behaviors are extracted from the measurement data for evaluation. To ensure the reliability of load testing, this research demonstrates feasibility through comparisons of existing measurement data with sensor attachment locations, train speeds, responses between different rail lines, tendency analysis, selection of impact coefficients, and analysis of natural frequencies. This study applies to the Dongho Railway Bridge and verifies the applicability of the proposed method. Ten operational trains and 44 sensors were deployed on the bridge to measure deformations and deflections during load test intervals, which were then compared with theoretical values. The analysis results indicate good symmetry and overlap of loads, as well as a favorable comparison between static and dynamic load test results. The maximum measured impact coefficient (0.092) was found to be lower than the theoretical impact coefficient (0.327), and the impact influence from live loads was deemed acceptable. The measured natural frequencies approximated the theoretical values, with an average of 2.393Hz compared to the calculated value of 2.415Hz. Based on these results, this paper demonstrates that for evaluating vertical loads, it is possible to measure deformations and deflections of truss railway bridges through load tests under operational train conditions without traffic control, enabling the calculation of response factors for stress adjustments.

• Korea Science and Art Forum
• /
• v.32
• /
• pp.319-334
• /
• 2018

This research is a case study to make sure the enhancement of students' imagination and creativity through developing and applying the Literature-Art-Science Integrated Education Program. Its research object was totally 25 persons of 29 students of the 1st to the 4 th Grades from Gunsan Sulsan Elementary School. Its research period lasted for 4 months from September to December, 2017, and I, as the research place, used the art room at Gunsan Sulsan Elementary School. The programs were totally 10 sessions with a unit of 1 session per each grade for 2 hours from 1:00 to 3:00 in the afternoon from Monday through Friday. I fixed ten themes of this program-eight plane modeling, and two solid modeling, and finished the work of storytelling during summer vacation. And I arranged their levels as low:middle:high(3:5:2) ones. The former was 'A Film of Monster Gorilla'(L), 'Learning the Spirit of Gyeongju Choi's Family'(M), 'A Tale of My Friend Made of Natural Materials'(L), 'The Reading of My Dream'(M), 'Gathering the Objects in My Mobile'(M), 'A Mock Trial of Marrying Off'(M), 'Painting My Favorite Children's Poem'(H), and 'Painting My Favorite Children's Song'(H), and the latter was 'Seeking for a Bluebird in My Mind'(L), and 'Making My Cherished Object' (M). Then I used the unique art expression technique per each theme, which were in sequence marbling, Korean paper art, combine painting, collage, imaginary painting, imaginary painting, play dough art, imaginary painting techniques. And I delivered to the students the scientific knowledge in terms of growing or manufacturing processes of materials used for making artworks. Prior to and after the processing this program, I surveyed about the students' ability of integrated thinking and emotional experience by 'Figure B Type' and 'Figure A Type' of The Torrance Tests of Creative Thinking, and took statistics with the resultant data. And I executed a paired t-test in order to verify the significance of mean difference in the result of investigation with those data. From the analyzed result according to the elements of creativity and the mean quotients of creativity, there showed a significant difference (t=3.47, p<.01) in 'fluency', and also a significant difference(t=3.59, p<.01) in 'creativity.' Judging from the statistic values of two fields such as the student's ability of integrated thinking and emotional experience, I estimate that over the majority of the students showed the enhancement in self-confident creative expression as well as higher interest and concern through this program. The result that I arranged and analyzed the making process of artworks, the photos of the resultant, etc. as such is as follows : Firstly, from this program being proceeded as art-centered STEAM class, the student's systematic problem-solving ability was improved in his ability of integrated thinking to transform the literary contents into artistic one. Secondly, the student obtained the emotional experience such as interest in the class, self-confidence, intellectual satisfaction, self-fulfillment, etc. through art-centered STEAM class using ten art expression techniques. Thirdly, the student's mind willing to cooperate, communicate with his friends, and care for them was ripened in the process of problem-solving. Fourth, the student's self-confidence was further instilled when presenting famous artists and their artworks in the introduction and finale of ten art expression techniques. Likewise, the statistic values on the fields of student's ability of integrated thinking and emotional experience illustrate that over the majority of the students showed improvement in the ability of creative expression with confidence as well as higher interest and concern upon this program.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.95-105
• /
• 2013

This study on circular identifying purposes was performed of Youngbeokji space located in Seongnagwon(Scenic Sites No.35). Through the data acquisition of 3D high precision, such as the surrounding terrain of the Youngbeokji. The results of this study is summarized like the following. First, the purpose of the stone structures and structure within the Youngbeokji search is an important clue to find that earlier era will be a prototype. 3D scan method of enforcement is searching the whole structure, including the surrounding terrain and having the easy way. Second, the measurement results are as follows. Department of bedrock surveyed from South to North was measured by 7,665mm. From East to West was measured at 7,326mm. The size of the stone structures, $1,665mm{\times}1,721mm$ in the form of a square. Its interior has a diameter of 1, 664mm of hemispherical form. In the lower portion of the rock masses in the South to the North, has fallen out of the $1,006mm{\times}328mm$ scale traces were discovered. Third, the Youngbeokji recorded in the internal terrain Multiresolution approach. After working with the scanner and scan using the scan data, broadband, to merge. Polygon Data conversion to process was conducted and mash as fine scan data are converted to process data. High resolution photos obtained through the creation of 3D terrain data overlap and the final result. Fourthly, as a result of this action, stone structure West of the waterway back outgoing times oil was confirmed. Bangjiwondo is estimated to be seokji of structure hydroponic facility confirmed will artificially carved in the bedrock. As a result of this and the previous situation of the 1960s could compare data was created. This study provides 3D precision ordnance through the acquisition of the data. Excavations at the circle was able to preserve in perpetuity as digital data. In the future, this data is welcome to take a wide variety of professionals. This is the purpose of this is to establish foundations and conservation management measures will be used. In addition, The new ease of how future research and 3D scan unveiled in the garden has been used in the study expect.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.1-23
• /
• 2014

Market forecasting aims to estimate the sales volume of a product or service that is sold to consumers for a specific selling period. From the perspective of the enterprise, accurate market forecasting assists in determining the timing of new product introduction, product design, and establishing production plans and marketing strategies that enable a more efficient decision-making process. Moreover, accurate market forecasting enables governments to efficiently establish a national budget organization. This study aims to generate a market growth curve for ICT (information and communication technology) goods using past time series data; categorize products showing similar growth patterns; understand markets in the industry; and forecast the future outlook of such products. This study suggests the useful and meaningful process (or methodology) to identify the market growth pattern with quantitative growth model and data mining algorithm. The study employs the following methodology. At the first stage, past time series data are collected based on the target products or services of categorized industry. The data, such as the volume of sales and domestic consumption for a specific product or service, are collected from the relevant government ministry, the National Statistical Office, and other relevant government organizations. For collected data that may not be analyzed due to the lack of past data and the alteration of code names, data pre-processing work should be performed. At the second stage of this process, an optimal model for market forecasting should be selected. This model can be varied on the basis of the characteristics of each categorized industry. As this study is focused on the ICT industry, which has more frequent new technology appearances resulting in changes of the market structure, Logistic model, Gompertz model, and Bass model are selected. A hybrid model that combines different models can also be considered. The hybrid model considered for use in this study analyzes the size of the market potential through the Logistic and Gompertz models, and then the figures are used for the Bass model. The third stage of this process is to evaluate which model most accurately explains the data. In order to do this, the parameter should be estimated on the basis of the collected past time series data to generate the models' predictive value and calculate the root-mean squared error (RMSE). The model that shows the lowest average RMSE value for every product type is considered as the best model. At the fourth stage of this process, based on the estimated parameter value generated by the best model, a market growth pattern map is constructed with self-organizing map algorithm. A self-organizing map is learning with market pattern parameters for all products or services as input data, and the products or services are organized into an $N{\times}N$ map. The number of clusters increase from 2 to M, depending on the characteristics of the nodes on the map. The clusters are divided into zones, and the clusters with the ability to provide the most meaningful explanation are selected. Based on the final selection of clusters, the boundaries between the nodes are selected and, ultimately, the market growth pattern map is completed. The last step is to determine the final characteristics of the clusters as well as the market growth curve. The average of the market growth pattern parameters in the clusters is taken to be a representative figure. Using this figure, a growth curve is drawn for each cluster, and their characteristics are analyzed. Also, taking into consideration the product types in each cluster, their characteristics can be qualitatively generated. We expect that the process and system that this paper suggests can be used as a tool for forecasting demand in the ICT and other industries.

• Journal of Chest Surgery
• /
• v.41 no.1
• /
• pp.55-60
• /
• 2008

Background: Circulating levels of brain natriuretic peptide (BNP) provide prognostic information for patients with heart failure. The aim of our study was to investigate whether preoperative and postoperative BNP levels could predict postoperative complications and outcomes in patients after coronary artery bypass graft (CABG). Material and Method: Data was collected prospectively on 30 patients (M/F=19/11, age $60.0{\pm}9.6$ years) undergoing conventional CABG during a 1-year period beginning on January 1, 2005. Patients underwent off-pump CABG, and combined surgery was excluded. The BNP assay was performed preoperatively, immediate postoperatively at the intensive care unit (ICU), and 1, 3, 5, and 7days postoperatively. Result: Preoperative BNP levels significantly correlated with preoperative echocardiographic ejection fraction and an ICU stay of 5 days or more (r=-0.4, p=0.028; r=0.39, p=0.031, respectively). A preoperative BNP cut-off value above 263 pg/mL demonstrated high specificity (90.5%) for predicting postoperative complications using the receiver operating characteristics curves. Preoperative and postoperative (7 days) BNP levels were different depending on the abscence (mean BNP=$99{\pm}23\;pg/mL$ vs. $296{\pm}74\;pg/mL$, p<0.05) and presence (mean BNP=$212{\pm}29\;pg/mL$ vs. $408{\pm}23\;pg/mL$, p<0.01). Conclusion: Preoperative BNP levels >263 pg/mL predict postoperative complications in patients receiving CABG.

• KSBB Journal
• /
• v.18 no.3
• /
• pp.211-216
• /
• 2003

The removal yield of dissolved organic matter in drinking water by biological activated carbon (BAC) process was investigated. The tested processes wer raw water-AC process (BAC1), raw water-ozonation-BAC process (BAC2), and raw water-ozonation-coagulation/sedimentation-BAC process (BAC3). The amounts of organic matter was measured as dissolved organic carbon (DOC), ulta-violet radiation at 254 nm wavelength ($UV_{254}$), total nitrogen (T-N), ammonia nitrogen (NH_3$-N), and total phosphate (T-P). As a results, 30.7% DOC was removed by BAC2 process, which showed higher removal efficiency than BAC1 or BAC3 processes. The removal yield of $UV_{254}$ in BAC1, BAC2, and BAC3 processes were observed as 45.3%, 44.6%, 58.4%, respectively. And the removal yield of ammonia nitrogen were 66%, 81%, 29% in each BAC processes. The optimal empty bed contact time (EBCT) of BAC processes was estimated as 10 minute. This study has shown that BAC process combined with ozone treatment was efficient for removing dissolved organic matter in water.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.108-118
• /
• 2019

Appreciating gardens in garden show has its meaning in appreciating concepts and ideas of artists, hidden inside of garden, as formative arts, as well as the beauty of the nature. This study is aimed to understand the intension of artists in visual expression through formative media in the gardens by assessing structure of visual narrative in the space with 20 artworks among the ones presented in 2018 Taehwagang Garden Show. The formative structure is delivered as contents and forms through formative media and formative language. Thus, for analysis on the artworks, the researcher assessed expressive characteristics of the media, through visual and space language, that forms the formative structure in the contest of narrative structure expressed in the gardens and findings of the analysis are as follows. First, for intertextuality obtained through media image, most of the artworks delivered message through 'figure image.' This means, the concept is delivered as 'affinity of actual objects' through the media and associated 'meaning and meaning action' are expected. Second, the characteristics of signs to show symbolism in the gardens were categorized into 'icon'. 'index' and 'symbol'. The results showed that most of the artworks expressed common characteristics between image and meaning, using 'icon' and 'symbol'. Third, as space formation components, based on formative principles, the components of 'dominant' and 'subordinate' roles were defined as the key components for meaning delivery. Also, it was understood that 'space configuration with overlapped image' and 'space configuration with transparency' were adopted to strengthen conceptional layers. Forth, for space occupation types, there were mostly central hall type, corridor type and passage space type and for open space type, the entire space area was conceptualized, instead of certain object. The circulation line was defined in the frequency order of circular type, pass type and return type. The study on the expressive characteristics of visual narrative in garden design is meaningful as it could build base data for the method of spatial design for visual development of concepts in the future.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.5
• /
• pp.1-13
• /
• 2007

In this research, we found out that bridging nodes have great effect on the robustness of protein-protein interaction networks. Until now, many researchers have focused on node's degree as node's essentiality. Hub nodes in the scale-free network are very essential in the network robustness. Some researchers have tried to relate node's essentiality with node's betweenness centrality. These approaches with betweenness centrality are reasonable but there is a positive relation between node's degree and betweenness centrality value. So, there are no differences between two approaches. We first define a bridging node as the node with low connectivity and high betweenness value, we then verify that such a bridging node is a primary factor in the network robustness. For a biological network database from Internet, we demonstrate that the removal of bridging nodes defragment an entire network severally and the importance of the bridging nodes in the network robustness.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.65-71
• /
• 2014

Cacalia firma is a perennial plant in Asteraceae, Parasenecio that distributed in Korea, China, and Japan. As dietary style changes for well-being life, consumer's demand of functional food and organic vegetables is getting increased. This study was conducted to investigate the optimum light conditions of P. firmus in forest farming. One year old seedlings were grown under four different light conditions 10%, 20%, 30%, and 50% of sunlight by shading (equals 50%, 30%, 20%, and 10% relative brightness respectively) and non-treated control under full sunlight. They were analyzed for early growth and physiological response. Seedlings grown under 75% shading showed similar height, root growth, and leaf water content to control. However, their leaf length, width, and total leaf area were increased, which caused increased leaf dry weight and total dry weight. Especially, seedlings under 95% shading showed 40% increase in height and more leaf growth and leaf water content, although they had shorter main root length and root collar diameter than control. In addition specific leaf area (SLA) and leaf area ratio (LAR) were higher than control and indicated that they were statistically significant difference from control. Higher SLA refers thinner leaf thickness, higher LAR means larger leaf area. The results indicate seedlings under 95% shading have higher water content, thinner leaf, and wider lightinterception areas. It is plausible that P. firmus is active in chlorophyll activities and carbon dioxide assimilation at even lower light conditions. These results suggest that the optimum light level of P. firmus for artificial cultivation in forest farming ranges from 75~95% shading (20%-10% of relative brightness). When salability as 'sanchae' (wild edible greens) is considered, P. firmus could be cultivated under 75% shading in forest farming and expected to have better taste and higher yield. We suggest these results as basic data of P. firmus for possible forest farming.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.32-40
• /
• 2015

This study was implemented to evaluate food safety on residual pesticides in agricultural products of Korea and to use as a data base for the establishment of food policy. A total of 196 pesticide upon these products were analyzed using multi class pesticide multiresidue methods of Korean Food Code, and 232 samples of 15 agricultural products collected from 9 regions were supplied for this study. In the results, 64 kinds of pesticides were detected in 53 samples, chlorpyrifos and procymidone of them were shown a high frequency of detection in the analyzed pesticides. Among them, two samples (chlorpyrifos in perilla leaves and picoxystrobin in peach) were detected over Maximum Residue Limits (MRLs). The levels of the detected pesticide residues were within safe levels. Also, the intake assessment for pesticide residues including chlorpyrifos at multi pesticide residue monitoring were carried out. The result showed that the ratio of EDI (estimated daily intake) to ADI (acceptable daily intake) was 0.001~0.902% which means that the detected pesticide residues were in a safe range so that residual pesticides in the agricultural products in Korea are properly controlled.