• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.206-214
• /
• 2018

This paper proposes an impact point estimation algorithm of the rifle using microphone sensors. The proposed algorithm resolves the time synchronization problem by expanding the existing ToA (Time of Arrival) method to TDoA (Time Difference of Arrival) method and verifies the performance of the algorithm through the actual shooting experiments. By comparing analysis of the actual and the estimated impact points by the algorithm, it is confirmed that the proposed algorithm has excellent performance by estimating the impact point accurately within the tolerance range.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.697-699
• /
• 2003

본 논문은 스트리밍 환경에서 서버의 고장을 빠르게 탐지하기 위해 동적임계점을 사용하고 이에 대한 성능을 분석한다. 제안된 기법은 스트리밍의 특성을 이용하여 질의 전송 시간을 결정하게 되는데 서버의 패킷도착 지연으로 인해 발생되는 질의 전송 시간의 증가를 최소화시키기 위해 패킷 지연도착 시간을 반영하지 않는 알고리즘을 적용하였다. 고장탐지에 대한 성능분석을 위해 스트리밍의 종류에 따라 질의 전송 시간이 다양하게 적용될 수 있기 때문에 다양한 스트리밍 자료를 활용하여 실험하였으며 제안된 기법의 성능을 검증하였다.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.159-163
• /
• 2013

In this paper, we propose a new method to deinterleave multi-stage stagger PRI signals of pulse radars using the electronic intelligence systems. While former algorithms were based on hardware PRI tracker only using the first deviation of the TOA of radar signals, this paper uses the first and the second deviation of TOA of radar signals and uses the PRI histogram method to deinterleave multiple PRIs of pulse radars. This algorithm can be used for deinterleaving various PRI signals at electronic intelligence systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.86-89
• /
• 2018

This paper introduces a ZigBee network-based four-lane lap time measurement system that can be set up for short-distance races. The instructions "Ready-Set-Go" can be announced at the entry point node when the start button is pushed, and foot switches installed at the exit point node can be stepped on by the runner for lap time measurement of the race. The start and exit point nodes are connected to a ZigBee network to communicate time synchronization packets. The exit point node maintains synchronized local time within 10 ms at most. The system does not need expensive measurement equipment and provides lap time recording in a more convenient manner than conventional lap time measurement methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.87-92
• /
• 2013

This paper focuses on analyzing the effects of primary user (PU) signal arrival on the local spectrum sensing performance. The probability for signal arrival at a sample in the sensing time is uniformly distributed in the sensing time. We first analyze the main factor that causes the degradation in the detection results in the conventional energy detection (CED) under the uniformly random arrival of the PU-signal. Thus we propose an approach in order to enhance the detection performance, in which an estimator which detects the arrival of the PU signal cooperates with a composite energy detection. The mathematical analysis and numerical simulation has validated the outperformance of the proposed approach compared to the CED.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.373-378
• /
• 2014

The technology of direction finding is very important to make high position fixing accuracy. TDOA(time difference of arrival) direction finding technology is a high accuracy technology and is used in RF system from 1990. The principle of TDOA is to receive an emitter signal with two antennas, measure the time difference of received signal and then convert the time differences to azimuth angle. For high DF(direction finding) accuracy long basis line and high SNR at receiving system are needed. The DF accuracy and position fixing accuracy are simulated with different SNRs and antenna base lines. We obtain the DF accuracy of $0.51^{\circ}$ at $0^{\circ}$ incident azimuth angle in case of 50m base line and 40dB SNR.

• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.615-620
• /
• 2009

Nowadays, wireless infrastructures such as sensor networks are widely used in many different areas. In case of sensor networks, the wirelessly connected sensors can execute different kind of tasks in a diversity of environments, and one of the most important parameter for a successful execution of such tasks is the location information of each node. As to localization problems in WSNs, there are ToA (Timer of Arrival), RSS (Received Signal Strength), AoA (Angle of Arrival), etc. In this paper, we propose a modification of existing ToA and RSS based methods, adding a weighted average scheme to measure more precisely the distance between nodes. The comparison experiments with the traditional ToA method show that the average error value of proposed method is reduced by 0.1 cm in indoor environment ($5m{\times}7m$) and 0.6cm in outdoor environment ($10{\times}10m$).

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.73-81
• /
• 2009

While various factors in passenger and freight demand analysis affect on destination choice, a key factor, in general. is an attractiveness measure by size variable (e.g., population. employment etc) in destination zone. In order to measure the attractiveness, some empirical studies suggested that disaggregate gravity model are more suitable than aggregate gravity model. This study proposes that truck travelers trip diary data among Korean commodity flow data could be used to estimate the behaviors of incorporating trip departure time, activity duration and attractiveness in destination. As a result, the main findings of size and distance variables coincide with the conventional gravity model having a positive effect of population variable and a negative effect of distance variable. Due to disaggregate gravity modeling, the unique findings of this study reports that small trucks are more likely to choose short distance and early morning, morning peak and afternoon peak departure time choice. On the other hand, large trucks are more likely to choose long distance and night time departure time choice.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.370-378
• /
• 2007

In wireless sensor networks (WSNs), thousands of sensors are often deployed in a hostile environment. In such an environment, WSNs can be applied to various applications by using the absolute or relative location information of the sensors. Until now, the time-of-arrival (TOA) based localization method has been considered most accurate. In the TOA method, however, inaccuracy in distance estimation is caused by clock drift and clock skew between sensor nodes. To solve this problem, several numbers of periodic time synchronization methods were suggested while these methods introduced overheads to the packet traffic. In this paper, we propose a new localization method based on multiple round-trip times (RTOA) of a signal which gives more accurate distance and location estimation even in the presence of clock skew between sensor nodes. Our experimental results show that the Proposed RTOA method gives up to 93% more accurate location estimation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3426-3433
• /
• 2015

Three baggage allocation methods of passenger-baggage hybrid train in restricted railway transportation capacity including round conveyor system, vertical circulation system, and horizontal circulation system are presented. Loading/Unloading time is calculated based on the volume transported from Busan to Seoul via Daegu, Daejeon, and Osong with the parcel company P's logistics data. The horizontal circulation system shows less baggage volume capacity to be allocated and the maximum loading/unloading time with 434 secs. The vertical circulation system presents more loading time, but it shows best result with 408 secs. Loading/Unloading times are compared for each system and useful method is presented to improve transportation efficiency of the train.