• Journal of Urban Science
• /
• v.11 no.2
• /
• pp.9-17
• /
• 2022

The purpose of this study is to develop an index for evaluating the function of a new motorway using the travel distance frequency distribution (TLFD) calculated using the vehicle travel route big data, and to overcome the limitations of the evaluation through the existing traffic volume. The mobility evaluation index of motorways was developed by applying it to the TLFD data table in 2019. The smaller the value of the mobility evaluation index of the link is calculated, the more it is a link with mainly short-distance travel, and the higher the value of the mobility evaluation index, the more it means a link with mainly long-distance travel. The accessibility evaluation index was calculated through the result of the mobility evaluation index of all motorways developed, and all motorways were grouped into three groups using K-means clustering. Group A was found to exist inside a large city and consisted of motorways with many short-distance traffic, Group B was investigated as acting as an arterial between groups, and Group C was classified as a motorway consisting mainly of long-distance traffic connecting large cities and large cities. This study is significant in developing a new motorway function evaluation index that can overcome the limitations of motorway function evaluation through the existing traffic volume. It is expected that this study can be a reasonable comprehensive indicator in the operation and planning process of motorways.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.3
• /
• pp.391-398
• /
• 2019

In general, truck-involved crashes increase severity in terms of both injury level and crash impact level. Recently, although the frequency and fatality of truck-involved crashes in Korea are rising, their associative studies are very limited. Therefore, the objective of this study is to identify critical factors influencing on injury severity of truck-involved crashes on Korean freeway system. To carry out this objective, this study uses an ordered probit model (OPM) based on a 6-year crash dataset from 2012 to 2017. From the analysis, eight variables were found to have a great effect on injury severity: older driver, crash speed, rear-end collision, number of vehicles involved, drowsy driving, nighttime (0:00 to 6:00) driving, overturn or rollover, and vehicle's fire after crash. However, injury severity was less severe in crashes under snowy condition and crashes to traffic facilities (i.e., crash alone).

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.79-87
• /
• 2007

The interchanges of urban freeways have many problems with traffic operation due to high off-ramp flows and frequent congestion at adjacent intersections. The flow exiting from off-ramps is affected by the operational status and traffic volume conditions of the nearest signalized intersection. As a result, off-ramp flow cannot exit and the queue backs up the freeway mainline when queues from the signalized intersection form up to the junction of the off-ramp and street. The spacing between an off-ramp and an adjacent intersection is likely to determine the traffic conditions at the adjacent intersection. However, the current design guidelines do not consider such a factor. This study is to develop a model calculating the spacing between off-ramps and adjacent intersections considering the signal, traffic, and road conditions. The variables affecting the model in this study are effective green time (g/C), volume-capacity ratio (v/c), the number of lanes, and off-ramp volume. Various scenarios are designed to represent the effects of the variables and the road networks are constructed using VISSIM, which is a common traffic micro-simulation software package. The queue length is derived from VISSIM and this length is considered as the recommended spacing between the off-ramp and the adjacent intersection. Through the simulation analysis, regression models are developed to calculate the queue length reflecting the various conditions such as signals, traffic, and road configurations. The developed model can be used to create road design guidelines to determine the location of off-ramps in the planning stage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.38-50
• /
• 2023

Recent advances in artificial intelligence (AI) technology have enabled the integration of AI technology into image sensors, such as Closed-Circuit Television (CCTV), to detect specific traffic incidents. However, most incident detection methods have been carried out using fixed equipment. Therefore, there have been limitations to incident detection for all roadways. Nevertheless, the development of mobile image collection and analysis technology, such as image sensors and edge-computing, is spreading. The purpose of this study is to estimate the reducing effect of the incident detection time according to the introduction level of mobile image collection and analysis equipment (or connected vehicles). To carry out this purpose, we utilized data on the number of incidents collected by the Suwon branch of the Gyeongbu expressway in 2021. The analysis results showed that if the market penetration rate (MPR) of connected vehicles is 4% or higher for two-lane expressway and 3% or higher for three-lane expressways, the incident detection time was less than one minute. Furthermore, if the MPR is 0.4% or higher for two-lane expressways and 0.2% or higher for three-lane expressways, the incident detection time decreased compared to the average incident detection time announced by the Korea Expressway Corporation for both two-lane and three-lane expressways.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.33-42
• /
• 2000

This Paper is a Part of research Project series to analyze unique traffic characteristics observable within weaving sections on urban freeways. The research objectives were to establish with headway distribution and maximum Passing volume on weaving sections the basis of weaving designs that can promote safety and efficiency. Until now, when one wants to check the maximum Passing volume on weaving sections, it is taken for granted using headway distribution of freeway basic section. However. it was suspected in this research that for weaving sections different form of headway distribution had better be used. To prove this, field surveys were made to count headway intervals which supposedly were influenced not only by freeway basic section flows but also by weaving flows and later on used to develop headway distribution for weaving sections. For validation of the developed headway distribution, $x^2$-test was applied to three different data set of observed headways, currently used headway distribution for basic sections(Pearson Type III distribution) and new headway distribution. The result indicated new headway distribution as the most appropriate distribution form. Also, maximum passing volume within weaving sections was calculated based on new headway distribution and compared with Drew's maximum Passing volume.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1123-1130
• /
• 2013

This paper aims to estimate work zone base capacity by the number of lanes for urban freeway. To do this, data were collected from the field survey and the database system maintained by traffic control center, and analyzed with four different methods such as the average maximum observation flow rate, headway, regression analysis, and parameter inspection. The work zone base capacity for urban freeway is estimated based on the average maximum observation flow rate and headway method, which are more reliable methods compared to others. The average capacity is 1,650pcphpl when the design speed is 80km/h. The capacity of four lanes one-way work zones was about 1,700pcphpl, while one of 2 lanes one-way work zones was about 1,600pcphpl. The capacity reduction rates for each are 0.15 and 0.2, respectively. The smaller the number of lane is, the more base capacity is reduced. For verification of results, we estimate the capacity by simulation analysis using PARAMICS, and compare with analytical results by a statistical method. This research can be used for efficient and systemic management of work zone in the urban freeway.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.28 no.6
• /
• pp.476-483
• /
• 1999

사회기반시설의 확충을 통한 물류비용 절감을 위해 최근 국내 고속도로 및 국도, 도시교통망의 신.증설이 가속화되고 있는데 특히 1965년 2개 노선 75km로 시작하여 1998년 말 현재 20개 노선 1996.3km인 고속도로는 앞으로 3년 후인 2002년까지 2,800km, 2004년 3,700km의 도로망을 갖추게 되는 눈부신 발전을 이루게 된다. 이와 더불어 국내 터널 시공기술의 향상과 환경피해 최소화 노력에 따라 긴 터널이 급속히 증가하고 있는데, 현재 운영중인 1,000m 이상의 고속도로 터널이 3개소에 불과한데 비해 2003년 개통을 목표로 하고 있는 1,000m 이상 터널은 44개소에 이르고 있다.

• Journal of Korean Port Research
• /
• v.4 no.1
• /
• pp.33-43
• /
• 1990

우리나라에서는 70년대 이후 컨테이너 수송체계가 도입되어 운영되어 왔으나 차량의 급격한 증가와 더불어 컨테이너 수송체계는 도시교통에 있어서 많은 문제를 야기시키는 것으로 논란이 되고 있다. 특히, 부산항은 우리나라 최대의 국제 무역항으로써 전 컨테이너 수송화물의 90%이상을 처리하고 있고, 또한 수출입항으로서 제 역할을 다하고 있으나 낮은 도로율(12.45%)과 산재해 있는 30여개의 Off-Dock CY로 인해서 도심을 통과하는 컨테이너 수송차량은 많은 교통문제를 유발시키고 있다. 본 연구는 1) 부산시에 산재해 있는 30여개의 Off-Dock CY에 이르는 주요 도로상에서 컨테이너 수송량의 신간별 분포에 따라 컨테이너의 운행시간대를 첨두 시간대, 비첨두 시간대 및 심야 시간대로 분류하여 각 시간대별 평균 수송 시간 및 교통 체증으로 인한 수송 지체수준을 확인하였고, 2) 컨테이너 전용부두로 부터 Off-Dock CY에 이르는 도시 고속도로 및 주요간선도로상에서의 수송시간 및 수송 지체수준을 비교 분석하였으며, 3) 마지막으로, 효율적인 컨테이너 수송체계를 위한 최적 수송시간대 및 도로체계를 제시할 수 있었다. 특히, 컨테이너 수송시간 및 지체수준은 각 운행 시간대에 따라 현저한 차이를 보이고 있었는데, 심야 시간대를 이용하여 컨테이너 수송을 할 경우에는 다른 시간대에 비하여 50%정도의 수송시간 절감효과를 기대할 수 있었으며, 도시 고속도로를 이용할 경우에는 도시 간선도로에 비하여 30%정도의 수송시간을 절약할 수 있었다. 따라서 도시지역의 교통체중을 완화시키기 위해서 심야 시간대에 보다 많은 컨테이너 수송차량이 이용할 수 있는 컨테이너 수송체계가 확립되어야 하고, 산재해 있는 Off-Dock CY를 몇개의 ODCY그룹이나 단지까지 컨테이너 전용 고속도로의 건설이 바람직하고 생각된다.리구에서 조사한 결과 $10^{-3}$ M MGBG 단독 처리구에서 에틸렌 생성량이 가장 높았으며, spermidine과 spermine의 함량은 가장 낮았다. 부정근 형성능이 다소 회복된 $10^{-3}$ M MGBG+ $10^{-5}$M spermine 혼합처리구에서의 에틸렌 생성량은 대조구보다는 다소 높게 나타났다. 부정근 회복능이 가장 높았던 $10^{-3}$ M MGBG+ $10^{-5}$ M spermine + $10^{-4}$ M Cocl$_2$ 혼합처리구에서 에틸렌 생성량은 가장 낮게 나타났으며, polyamine 함량은 가장 높게 나타났다.(Cyperaceae), 명아주과(Chenopodiaceae) 같은 풀들이 하구언(estuary)의 해안가에 주로 서식하였던 것으로 나타났다. 이 시기동안에 해양성조류인 와편모류와 담수성 조류가 동시에 다양하게 산출되는 것은 하구언 퇴적환경이었음을 잘 지시해 준다. 제II화분대(고도, 43.72{\sim}3.36\;m$)가 시작되면서 혼합림은 침엽수림으로 바뀌었으며, 낙엽활엽수들의 서식지가 2엽소나무로 대치되면서 침엽수가 주요 수종을 이루었던 것으로 나타났다. 아마도 이런 산림형태는 자연 기후환경변화 뿐만 아니라 인간간섭에 의해 나타난 결과로 생각된다. 이 시기에 경작식물인 벼과(Gramineae), 옥수수(Zea), 메밀(Fagopyrum)과 논밭의 뚝 등지 에서 서식하는 돼지풀(Ambrosia) 등이 처음으로 산출되는 것으로 보아 인간간섭이 행해졌음을 잘 뒷 받침해준다. 또한 담수성 조류는 변함없이 산출되는 반면, 해양성조류인 와편모류가 산출되지 않는 것으로 보아 해안환경에서 다소 멀 어진

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.101-109
• /
• 2007

Two variations of toll roads exist: mainline toll plazas and entry/exit tolls. On a mainline toll system(open toll scheme), all vehicles stop at various locations along the highway to pay a toll. While this may save money from the lack of need to construct tolls at every exit, it can cause lots of traffic congestion, and drivers could evade tolls by going around them. With entry/exit tolls, vehicles collect a ticket when entering the highway, which displays the fares it will pay when it exits, increasing in cost for distance travelled. Upon exit, the driver will pay the amount listed for the given exit. The pressures on the Seoul ring roadway network have been changing over time. In the past, the emphasis was on mobility and maintenance of the road network to provide an efficient transportation network, but recently, road use has outstripped the network's ability to extend and expand the road network and hence the policy emphasis has moved towards reducing free riders rather than mitigating its effects. In addition to this pressure is an incidental pressure, which argues that provision of free ride segments generates further traffic in isolation of other factors. This paper is examining policies to reduce the burden of traffic congestion in Seoul ring roadway which is used open toll scheme for decades. One key mechanism to achieve this policy aim is automatic charging mechanism on freeway, but if a nation-wide electronic toll collection is to be implemented successfully, there are a number of prerequisites which must be place.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.75-83
• /
• 2012

This study is to find a shortcoming embedded in the current Korean Highway Capacity Manual (KHCM) on reflecting a heavy vehicle effect to the highway capacity. The KHCM suggests to handle the percent heavy vehicle to deal with its effect to a capacity regardless of density levels. Authors hypothesized in this study that the effect of heavy vehicles would vary at different levels of traffic density - the effect would be comparably insignificant when a density is low and it becomes comparably significant when it becomes high. Field data from a freeways located in Seoul were collected for 360 hours (15 days) and categorized them into a set of operation conditions grouped by 15 minutes and by the LOS density levels. Comparison between the field measured and the estimated by the KHCM method showed that the KHCM method overestimated the effect of heavy vehicles in LOS B and C but underestimated in LOS E. The results suggested that there be a difference pattern from the one the KHCM expected and brought discussion on further studies.