• Electronics and Telecommunications Trends
• /
• v.23 no.4
• /
• pp.80-88
• /
• 2008

9.11 사태 이후, 세계 각국은 개인 및 공공의 안전을 위한 국토보안에 대한 중요성을 한층 더 실감하고 이에 대한 노력을 더욱 강화하고 있으며, 이러한 과정에서 지능형 영상보안 기술의 개발 및 활용에 대한 중요성이 날로 증대되고 있다. 아날로그 CCTV에서 디지털 저장장치, IP 기반기술과의 결합과 지능형 영상인식에 이르기까지 영상보안 기술은 지속적인 진화를 거듭하고 있다. 이에 따라 기존의 시설물과 출입자에 대한 수동적인 녹화 및 감시에서 실시간으로 상황을 인지하고 자율대응할 수 있는 네트워크 기반의 지능형 시스템으로 발전하고 있다. 또한 공항, 군사, 항만, 도로, 교량 등 주요 국가시설, 지하철, 버스, 사무실, 카지노에서 산불감시에 이르기까지 매우 다양한 분야로 그 응용영역을 확대하고 있는 추세에 있다. 본 고에서는 이러한 배경을 토대로 영상 보안 기술의 현황과 시장동향, 지능형 영상보안 및 Human ID 기술, 최근 이슈와 발전 방향에 관하여 살펴보고자 한다.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.63-68
• /
• 1996

차량의 자동제어는 컴퓨터, 통신, 기계, 계측등의 하드웨어와 자동제어 기술, 통신망 운영, 컴퓨터 운영등의 소프트웨어 기술의 응용을 바탕으로 하는 지능형 차량은 단순히 차량 상호간, 차량과 도로에 설치된 컴퓨터와의 통신으 통한 정보교환 기능과 더불어 운전기능 자체를 스스로 행하는 기능을 포함하고 있다. 지능형 차량 개발은 운전자 인식증진 기술, 사고회피 기술, 피해확산 방지기술, ITS(Intelligent Transport System) 연계 및 관련 Infrastructure 기술, Human-Machine Interface 기술, Sensor Fusion 기술, 레이더 기술 등을 꼽을 수 있다. 이중에서 차량의 지능화를 구현하는 가장 핵심적인 세부 기술은 CCD 카메라, 레이저 레이더, 밀리파 레이더, 생체 센서등을 들 수 있다. 본 원고에서는 위와 같이 차량의 지능화, 특히 차량 거리검지 장치를 구현코자 사용되고 있는 센서의 종류와 응용에 대하여 고찰하고자 한다.

• Electronics and Telecommunications Trends
• /
• v.20 no.6 s.96
• /
• pp.24-35
• /
• 2005

지능형 순항 제어 시스템(Adaptive Cruise Control System)은 자동차가 정속을 기준으로 주행중 센서를 활용하여 감지하는 도로 상황에 대한 실시간 정보를 자동차의 전자제어부(ECU)로 연결하여 매 순간 안전상황을 확보하기 위한 조치를 자동으로 취한후 다시 정속 주행으로 복귀할 수 있도록 제어하는 차세대 첨단 자동차 주행용 안전 장치를 통칭하는 개념이다. 본 분석에서는 Global Industry Analysts의 보고 자료(2005.1.)를 바탕으로 시장 전망과 세계 업계의 개요를 소개하여 우리나라의 관련 기술에 대한 길잡이로 활용하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.957-960
• /
• 2013

Eco driving comprises the use of feedback information that informs the driver of vehicle performance. This paper evaluated the performance of feedback device that reported instantaneous fuel economy to drivers while driving. We took the measurement by getting data through OBD port from commercial vehicle covered 67 km on road. The changes observed in fuel efficiency were established 10.6 % improvement in fuel economy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.117-124
• /
• 2009

In this paper, we have developed communication modules for ubiquitous transportation sensor network (u-TSN). The developed module can be used for intelligent transportation services. The developed systems are based on IEEE 802.11a and IEEE 802.11g technologies for vehicle and infrastructure systems, respectively. We have found that the throughput for the developed systems is at maximum around 15 Mbps. It is reduced to 10 Mbps at a long distance and high speed condition. The performance is enough to support traffic control services in dense traffic condition.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.89-95
• /
• 2003

In this study, the technical characteristics of geosynchronous multi-mission satellites are investigated, compared to communication satellites. Geosynchronous meteorological satellites, whose imaging data is normally shared with the international society, have large coverage for monitoring and data service. Also the higher pointing accuracy is requested to keep the spatial resolution of 1-4km, compared to those of communication satellites. Cryogenic thermal control is needed for the better performance of IR sensors and the contamination protection of optical parts should be considered. On the other hands, for the successful development of the multi-mission satellite COMS, which will be launched in 2008, the special features of attitude control, electrical power, thermal control and mechanism are investigated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.135-141
• /
• 2019

Internet of thing becomes more active, many sensor devices are increasing. Sensors can use network wired network or use mobile communication network. From the viewpoint of the transmission rate, the mobile communication network can be roughly divided into two types of high-speed communication and low-speed communication. In the case of hundreds of millions of sensors in the mobile communication network, resources are wasted to use high-speed communication. Communication is required to reduce the transmission rate and appropriately allocate resources without wasting such resources. As the Internet of Thing has been activated, Narrowband Internet of Thing(NB-IoT), which is one of the low-power technologies in recent mobile communications, is in the spotlight from various companies. Currently, it can be seen that only NB-IoT or other low power consumption communication has the potential to be able to connect to the Internet with rapidly increasing sensor devices. In this paper, we designed and implemented a heater controller using Huawei NB-IoT communication Module, a server that collects controller information, and an application that allows default settings for devices. The main function of this system is to collect temperature and heater status and give it to the server, control the heater from the server, and set parameters for the heater to operate automatically. The system can be applied to places where wired communication is not established, such as road information, smart agriculture, and small reservoirs as well as heaters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7C
• /
• pp.576-583
• /
• 2012

Security over VANET among vehicles and between vehicles and infrastructures has been studied. Through the research, ensuring the message authentication and confidentiality was possible. However, authentication on drivers and vehicles were not actively covered. Once, malicious user using illegal vehicle joins VANET and then generates mistaken information, other drivers' safety will be driven to crisis. For this reason, in the paper, we present a novel authentication method between drivers and vehicles and then only right vehicles and users can participate in VANET. As a result of this, drivers can enjoy their safe and comfortable trip.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.632-637
• /
• 2019

Recent researches on autonomous driving of vehicles are becoming very active, and it is a trend to assist safe driving and improve driver's convenience. Autonomous vehicles are required to combine artificial intelligence, image recognition capability, and Internet communication between objects. Because mobile telecommunication networks have limitations in their processing, they can be easily implemented and scale using an easily expandable Wi-Fi network. We propose a wireless design method to construct such a vehicle control network. We propose the arrangement of AP and the software configuration method to minimize loss of data transmission / reception of mobile terminal. Through the design of the proposed network system, the communication performance of the moving vehicle can be dramatically increased. We also verify the packet structure of GPS, video, voice, and data communication that can be used for the vehicle through experiments on the movement of various terminal devices. This wireless design technology can be extended to various general purpose wireless networks such as 2.4GHz, 5GHz and 10GHz Wi-Fi. It is also possible to link wireless intelligent road network with autonomous driving.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.52-60
• /
• 2013

ITS technologies are in the research and development around the world as a solution for maximizing the efficiency of the existing road infrastructure, solving the complex traffic problems and providing the convenient driving services. The core of these ITS technologies is to provide the information for the requesting users in fast and accurate way from the server. In real driving conditions, there are many communication barriers around the vehicles and the base stations so that an accurate and robust handover technology is needed in order to ensure seamless ITS services. This paper introduced an WAVE handover algorithm implemented in a real communication device and five parameters mainly affecting the handover performance are evaluated. The handover performance is measured by changing the parameter values at a highway testbed. The test results show that the handover algorithm parameter values should be configured carefully to remove the handover ping-pong problems.