• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.90-104
• /
• 2015

The purpose of this paper is to build a spatio-temporal evapotranspiration(ET) estimation model using Terra MODIS satellite image and by calibrating with the flux tower ET data from watershed. The fundamentals of spatial ET model, Surface Energy Balance Algorithm for Land(SEBAL) was adopted and modified to estimate the daily ET of Yongdam Dam watershed in South Korea. The daily Normalized Distribution Vegetation Index(NDVI), Albedo, and Land Surface Temperature(LST) from MODIS and the ground measured wind speed and solar radiation data were prepared for 2 years(2012-2013). The SEBAL was calibrated with the forest ET measured by Deokyusan flux tower in the study watershed. Among the model parameters, the important parameters were surface albedo, NDVI and surface roughness in order for momentum transport during calculation of sensible heat flux. As a result of the final calibration, the monthly averaged albedo and NDVI were used because the daily values showed big deviation with unrealistic change. The determination coefficient($R^2$) between SEBAL and flux data was 0.45. The spatial ET reflected the geographical characteristics showing the ET of lowland areas was higher than the highland ET.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.294-294
• /
• 2019

The system for predicting flood of river at Flood Control Office is made up of a rainfall-runoff model and FLDWAV model. This system is mainly operating to predict the excess of the flood watch or warning level at flood forecast points. As the demand for information of the management and operation of riverside, which is being used as a waterfront area such as parks, camping sites, and bike paths, high-level forecasts of watch and warning at certain points are required as well as production of lowland flood forecast information that is used as a waterfront within the river. In this study, a technology to produce flood forecast information in lowland areas of the river used as a waterfront was developed. Based on the results of the 1D hydraulic analysis, a model for performing spatial operations based on high resolution grid was constructed. A model was constructed for Andong district, and the inundation conditions and level were analyzed through a virtual outflow scenarios of Andong and Imha Dam.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.51-64
• /
• 2019

Mt. Geumgang has been a scenic spot representing the Korean peninsula since the Joseon Dynasty, and became a symbol of inter-Korean exchanges with the Gaesong Industrial Complex after the division of the South and North. Mt. Geumgang Tour Course is divided into the Inner-Geumgang (Naegeumgang) and the Outer-Geumgang (Oegeumgang). It was common for the Mt. Geumgang tour route during the Joseon Dynasty and the Japanese Imperialization period to enter the Inner-Geumgang, near Seoul, and come to the East Sea through the Outer-Geumgang. However, the tour route starting from Goseong was utilized for the Mt. Geumgang tour course operated by Hyundai. Because North Korea opened only the Outer-Geumgang area. North Korea has only opened some of its tour courses to Hyundai, but if Geumgang tourism is resumed in the future, there is a high possibility that it will be opened further, such as opening some sections of the Inner-Geumgang in 2007. In this case, it is necessary to connect additional transportation networks to access Inner-Geumgang from South Korea. The best alternative was the restoration of the Mt. Geumgang Railway. However, considering the fact that the reconstruction of the Mt. Geumgang Railway can not be completed due to the construction of the Imnam Dam, it is the most realistic alternative to restore Route 31 connecting Yanggu and Geumgang-eup. As a result of the analysis of road connecting Inner-Geumgang, three routes were confirmed. All of which were adjacent to the existing National Route 31. These routes passing through Dutayeon and Mundeung-ri and joining the Route 31 from Inje. Considering road length, topography characteristics, and military facility layout, it seems that the connection of 'Dutaeyun - Mundeung - Geumgang' is a realistic alternative connecting from South Korea to Inner-Geumgang.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• Journal of Korean Historical Folklife
• /
• no.44
• /
• pp.39-70
• /
• 2014

"Seonweon Bogam" was made for the purpose of delivering information on the tomb of members of the royal family of the Joseon Dynasty. Accordingly, it covered all of Sando making a pictorial expression of the tomb. But its value has been doubted as it is roughly expressed and different from the picture of the actual scene. But "Seonweon Bogam" is the only book that covers Sando of all the kings of the Joseon Dynasty but contains the elements making it possible to estimate the possibility that the original Sando might be used in making Sando. Accordingly, it is a high time to make an in-deep study of this. This study attempted to investigate Sando included in "Seonweon Bogam" with a focus on the expressive style. For this purpose, it sought to analyze seven elements such as the exposure, the legend, locational information, direction, waterway and road, expression on water and Fengshui(風水) terminology. As a result, the following conclusion was drawn: Sando concerning the tombs of members of the Joseon Dynasty was continually made. It was made in two ways such as the way of drawing the scene on spot and the way of imitating the existing made material. And it could be estimated that there is a possibility that Sando of "Seonweon Bogam" might be copied by the figure with only a little expertise about Sando but on the basis of several materials about the existing Sando of the royal family.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.3
• /
• pp.74-99
• /
• 2022

Surface ozone is produced by photochemical reactions of nitrogen oxides(NOx) and volatile organic compounds(VOCs) emitted from vehicles and industrial sites, adversely affecting vegetation and the human body. In South Korea, ozone is monitored in real-time at stations(i.e., point measurements), but it is difficult to monitor and analyze its continuous spatial distribution. In this study, surface ozone concentrations were interpolated to have a spatial resolution of 1.5km every hour using the stacking ensemble technique, followed by a 5-fold cross-validation. Base models for the stacking ensemble were cokriging, multi-linear regression(MLR), random forest(RF), and support vector regression(SVR), while MLR was used as the meta model, having all base model results as additional input variables. The results showed that the stacking ensemble model yielded the better performance than the individual base models, resulting in an averaged R of 0.76 and RMSE of 0.0065ppm during the study period of 2020. The surface ozone concentration distribution generated by the stacking ensemble model had a wider range with a spatial pattern similar with terrain and urbanization variables, compared to those by the base models. Not only should the proposed model be capable of producing the hourly spatial distribution of ozone, but it should also be highly applicable for calculating the daily maximum 8-hour ozone concentrations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.316-316
• /
• 2023

2022년 8월 수도권 이상폭우로 인해 서울 도심지역의 지하시설, 도로, 주택 등에 침수가 발생하면서 인명 및 재산피해가 발생하였으며, 특히 동서로 가로지르는 정체전선으로 좁고 긴 비구름이 집중되면서 국지적으로 피해가 집중되었다. 서울시의 경우 도시화에 따른 불투수지역 증가 및 내수배제 불량에 따른 빗물 역류로 인한 피해가 지속적으로 발생하고 있으며, 최근에는 기후변화에 따른 방재성능목표 강우량을 초과하는 빈도의 이상폭우로 인해 하천범람과 내수배제 불량에 따른 복합적인 원인으로 침수피해 가중되고 있는 실정이다. 또한 서울시의 경우 전체 자연적, 사회적, 경제적, 환경적 요인 등의 지역적 편차가 매우 큰 도시로 지형적인 특성뿐만 아니라 취약시설(병원, 학교 등), 수방시설물(하천, 배수시설, 빗물펌프장 등) 및 방재시설(대피소, 구호소 등) 밀도 등에 따른 침수 취약성 및 위험성 등의 편차가 매우 크기 때문에 지역특성에 대한 피해사례가 다원화 되고 있는 실정이다. 본 연구에서는 30년 이상의 종관기상관측(ASOS)과 서울시 자치구별 20년 이상의 방재기상관측(AWS)자료를 기반으로 CMIP6 SSP(Shared Socioeconomic Pathways, 공통사회 경제경로)시나리오에 따른 극한기후 지수(강수강도, 호우일수, 지속기간, 1일 최대강수량, 95퍼센타일 강수일수 등)에 대한 재현성을 평가하고 공간자기상관분석 등 시공간적인 강우특성에 대한 변화를 전망하였다. 특히 여름철 강우의 경우 자치구별 편차가 크게 나타났고 이를 통해 대도시의 도심지역의 경우 세분화하여 지역의 정확한 강우특성을 파악하는 것이 필요하다는 것을 확인할 수 있었다. 본 연구의 결과는 도심지의 방재성능 초과강우 정의와 기준을 수립하고, 장기적인 수자원 및 도시계획 차원의 대책을 마련하는데 활용될 수 있을 것으로 판단된다. 기후위기에 따른 기록적인 호우(지역별 방재성능을 초과하는 강우)에 따른 재해는 구조적인 대책을 통해 모두 저감할 수 없는 한계가 있다. 하지만 인명피해를 최소화하는 것을 목표로 기후위기에 대한 적응단계로 인식하고 수리·수문학적, 사회경제학적 등 지역특성에 따른 방재성능목표 강우량에 대한 재검토와 더불어 법제도(풍수해보험, 저류조설치 의무화 등), 개인별 재해예방, 취약계층 안전망 확보, 반지하주택 침수안전대책, 재해지도 개선 등 구조적/비구조적인 대책을 통합 수립 및 보완하는 것이 필요한 시점이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.859-869
• /
• 2008

These days, almost every industry's production line has become automatic and this phenomenon brought a lot of benefits such as increase in productivity and economical effect, assurance in industrial safety, better quality and compatibility. However, unlike industrial production line, in construction industry, automation has number of barriers like uncertainty incidents and intellectual judgment to make ability to make solution out of it. Therefore construction industry is still demanding use of construction machine through labor. Due to this matter operational labor in construction industry is aging and fading. To solve these problem, in developed nations like Europe, US or Japan are keep researching for the automation in construction and road pavement, strengthening and some other simple operations have been worked through automation but in civil engineering site, automation research is still low despite of its importance in constructional site. For automating civil engineering operation, effective operational plan have to be set by analyzing ground information acquainted. If skillful worker apply heuristics, trial & error can be reduced with increased safety and the effective work plan can be established. Hence, this research will introduce Intellectual Task Planning System for Intelligent Excavating System's effective work plan and heuristics applied in each steps.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.523-529
• /
• 2023

The aim of this study was to analyze the potential for timber harvesting in the Hongchoen Garisan Leading Forest Management Complex in the national forests, and to suggest an optimal target yield for sustainable timber harvesting. The potential for timber harvesting was assessed by analyzing the area available for timber harvesting using GIS spatial analysis, but excluding areas with a slope of more than 40° (topographical constraints), areas within 30 m on both sides of streams (environmental constraints), and areas more than 300 m away from forest roads (technical constraints). The analysis identified 3,298 ha (49%) of the total complex area of 6,679 ha as available for timber harvesting, yielding a potential harvesting volume of 608,613 m³. In the case of coniferous plantations, the potential harvesting volume was 409,721 m³, which was a very high level that accounted for 67.3% of the total. We also conducted an optimization analysis to minimize the differences in area between age classes, while maintaining sustainable timber harvesting for the next 50 years. An annual average of 41.9 ha (7,988 m³) was determined to be the optimal timber yield, and in this case, it was possible to convert the age class structure to a more stable structure after 50 years.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.420-430
• /
• 2001

The object of this study is to develop a computer program for the arrangement of the forest-road network maximizing the investment effect in forest-road construction with factors such as terrains, forest physiognomy, management plan, logging system, cost of forest-road construction, capacity of inputted labour, capacity of timber production and so on. The operating system developed by this study is Korean Windows 95/98 and Microsoft Visual Basic ver. 5.0. User interface was designed as systematic structure, it is presented as a kind of GUI(graphic user interface). The developed program has result of the most suitable forest-road arrangement, has suitable forest-road density calculated with cost of logging, cost of forest-road construction, diversion ratio of forest-road, cost of walking in forest. And the most suitable forest-road arrangement was designed for forest-road arrangement network which maximized investment effect through minimizing the sum of cost of logging and cost of forest-road construction. Input data were divided into map data and control data. Digital terrain model, division of forest-road layout plan, division of forest function and the existing road network are obtained from map data. on the other hand, cost of logging related terrain division, diversion ratio of forest-road and working road, cost of forest-road construction, cost of walking, cost of labor, walking speed, capacity of inputted labor, capacity of timber production and total distance of forest-road are inputted from control data. And map data was designed to be inputted by mesh method for common matrix. This program can be used to construct a new forest-road or vice forest-road which compensate already existing forest-road for the functional forestry.