• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.1-11
• /
• 2018

Mapping accurate spatial information is important for constructing three-dimensional (3D) spatial models and managing artificial facilities, and, especially, mapping road centerlines is necessary for constructing accurate road maps. This research developed a semi-automatic methodology for mapping road centerlines using the MMS(Mobile Mapping System) LiDAR(Light Detection And Ranging) point cloud as follows. First, the intensity image was generated from the given MMS LiDAR data through the interpolation method. Next, the line segments were extracted from the intensity image through the edge detection technique. Finally, the road centerline segments were manually selected among the extracted line segments. The statistical results showed that the generated road centerlines had 0.065 m overall accuracy but had some errors in the areas near road signs.

• 한국지형공간정보학회:학술대회논문집
• /
• 2004.10a
• /
• pp.25-31
• /
• 2004

To obtain the 3-D coordinates of the urban roads from aerial images, the accurate matching technique in road areas is required. In this paper, we suggest the relational matching method that is performed by comparison of relationships of road pavement markings after they are extracted from aerial images using geometric properties and spatial relationships of the pavement markings. Relational matching requires not only high level description of features but also the solution for inexact matching problems. In addition, it needs a lot of tests for the reliable final result. In this research, we described features as calculating geometric properties of the pavement markings, suggested the solution for inextact matching problems, and performed tests to decide whether the result is acceptable or not, which use the property that road areas are flat. In order to evaluate the accuracy of matching, we made a visual evaluation and compared the result of this technique with those measured by analytical photogrammetry.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.615-623
• /
• 2015

Estimation of wind load on bridges is one of the most important aspects in designing bridges in coastal region. Various design codes and researches have suggested the procedure to estimate design wind speed; however, they do not match one another due to many reasons such as incomplete data set, ignorance of wind environment and so on. For this reason, the necessity of guideline for estimation procedure of basic wind speed which reflect the roughness of surface and the topographical effect have been increasing. In this study, we have analysed limitations of the basic wind speed of nationwide suggested by Korea Building code(AIK, 2009) and Highway bridge design code(MOLTMA, 2010). In additional, we set forth guidelines considering the roughness of land surface and the topographical effect. Using the procedure, the basic wind speed were estimated for 15 coastal regions in Korea and compared with those listed in the existing codes.

• Spatial Information Research
• /
• v.10 no.3
• /
• pp.469-480
• /
• 2002

Nowadays, digital maps of 1:5,000 scale are used to plan and review far road alignment design. However, the updating and modifying period of digital maps is not so harmonious as topographical changes caused by rapid developments can be reflected in digital maps, the different areas between real surface and digital map can be found easily. This research is aimed to suggest that the use of high resolution satellite image is effective way to get latest topographical information for road alignment design about wide region. IKONOS satellite images were geometrically corrected, and the road alignment data previously designed by traditional procedure were overlapped on the satellite images. As a result, the satellite image maps clearly described wrong road alignment, and modification of road alignment could be accomplished adequately By these procedures, road alignment design was Improved in quality, and could be reasonable and economic design to prevent modification that would be happened in the next step of practical plan. For the geometric correction method of IKONOS images, Thin Plate Spline(TPS) transformation with large number of ground control points, as well as ortho rectification, was effective.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.155-163
• /
• 2010

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on-board the NASA's Terra spacecraft provides along-track digital stereo image data at 15m resolution with a base-height ratio 0.6. Automated stereocorrelation procedure was implemented using the ENVI 4.1 software to derive DEMs with $15m{\times}15m$ in 43km long and 50km wide area using the ASTER stereo images. The accuracy of DEMs was analyzed in comparison with those which were obtained from digital topographic maps of 1:25,000 scale. Results indicate that RMSE in elevation between ${\pm}7$ and ${\pm}20m$ could be achieved. Excluding cloud, water and building areas as the factors which make RMSE value exceeding 10m, the accuracy of DEMs showed RMSE of ${\pm}5.789m$. Therefore for the purpose of elevating accuracy of topographic information, we intended to detect the cloud areas and shadow areas by a landcover classification method, remove those areas on the ASTER DEM and then replace with those areas detached from the cartographic DEM by band math.

• Journal of Korean Society of Transportation
• /
• v.18 no.3
• /
• pp.101-112
• /
• 2000

The Purpose of this Paper was to revise the method of USHCM and to establish new method for level of service analysis on two-lane rural highways. For this Purpose, total delay rate was selected as new MOE for level of service, replacing the present Percent time delay. This result showed that total delay rate was more effective for considering the effects of traffic flows, auxiliary lane, and vertical tirade. The application of total delay rate could resolve the Problems in the USHCM method, such as too wide ranges for level of service D and E, and the use of different Procedures for level of service analysis of general terrain segment and specific grade Procedures. The research results are as follows First, a new method for level of service analysis on two-lane rural highways was developed using the total delay rate. Second, a new classification for level of service was developed and a consistent method applicable for general terrain segment and specific tirade Procedures was developed. Third, the desired speed on two-lane rural highways was determined as 85km/h.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.472-472
• /
• 2021

우리나라는 하천법 제10조, 소하천정비법 제3조에 하천기본계획 수립 또는 하천의 지정 및 변경고시 시 하천구역을 결정하도록 정의되어 있다. 하천구역 설정 시 일반적으로 하천의 제방이 위치하는 부지 및 제방하심측 토지경계를 하천구역으로 지정하고 있으나, 제방계획이 없거나 무제부 구간으로 활용되고 있는 구간의 경우 하천법 제10조 3항에서 5항까지 3가지 항목을 기준으로 계획하폭에 해당하는 토지, 댐·하구둑·홍수조절지·저류지의 계획홍수위 아래에 해당하는 토지경계, 철도·도로 등 제방의 역할을 하는 선형공작물 하심측 토지경계로 구분하고 있다. 하천구역의 경계설정의 경우 불연속적인 특징을 갖는 하천의 횡단측점 자료의 특성상 정확한 평면상의 경계를 파악하기 어렵고, 철도·도로 등 선형공작물 경계를 하천구역으로 설정 시 편입용지의 보상이 상이하고 모호한 기준으로 인해 다량의 민원이 발생하는 실정이다. 본 연구에서는 부산시에 위치한 지방하천 대천천을 대상지로 설정하였으며, 계획홍수위를 기반으로 홍수범람예상도를 작성하여 정밀계획홍수위선을 산출하고 이를 지형자료와 중첩하여 계획홍수위 경계를 추출하였다. 또한 무제부 구간 내 드론촬영을 실시하여 대상지 드론영상 기반 3차원 정밀 지형자료를 구축하고 이를 앞서 산정한 계획홍수위 경계자료와 중첩하여 정밀 하천구역을 설정하였다. 대상지 정밀 하천구역 산정 결과를 기반으로 도심지내 하천과 도시외곽 하천으로 구분하고 다시 도심지내하천은 암거(복개)구간과 개거구간, 도시외곽하천은 유제부와 무제부 구간으로 구분하여 정밀 하천구역 결정기준을 수립하였다. 본 연구를 통해 대천천유역을 대상으로 실시한 무제부 구간 하천구역 결정과정을 기반으로 하천유형별 3차원 하천구역 산정기법을 정립하였다. 향후 해당기법을 실무에 적용하여 하천구역 산정 시 모호한 하천경계부분 또는 토지소유주와 담당부처 간 하천구역 논의 시 기반자료로 활용될 수 있을 것으로 사료되며, 기본계획 수립 시 해당 기법 적용을 통해 보다 정확한 하천구역 경계 수립이 될 수 있을 것으로 기대된다.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.191-199
• /
• 2019

Road development is considered an important factor in invasion and dispersion of ailen plants by damaging the natural ecosystems and connecting the detached landscapes into long tubular structures. In this study, vegetation survey was carried out according to the topographical characteristics of cut slope, fill slope, and flat land at the construction site in order to understand the effect of road developemt on the change of the floristic composition of ailen plants. Road developement projects caused a lot of changes in annual and biennial alien plants because of continuous disturbances. Changes in species composition of alien plants decreased in the cut slope. On the other hand, the ailen palnts of the fill slope increased. The increase or decrease alien plants on flat land were identified depending on where it occurred, and no major trend was found. The cause of these change was driven by unintentionally introduced alien plants. In particular, the cut slope with a high occurence of unintentional ailen plants should not be used as a source of high-risk alien plants such as ecosystem disturbances. Since the transplanted species were intentionally planted by the landscape plan, it was possible to identify colonies from early stages and spread to the nearby flat land. Therefore, in order to minimize the impact of road slope vegetation on the surrounding ecosystem during and after road construction, it is suggested to plant high viability plants in the landscape design during the environmental impact assessment consultation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.553-559
• /
• 2011

The bicycle use activation plan reduces a greenhouse gas exhaust, and economic convenience, movement timely shortening, health effect will be able to expect but the bicycle user is few. The nationwide bicycle road projects is advanced by the countermeasure for a bicycle use activation. It is advanced a bicycle road basic plan even from each local government. The research against a route selection is advanced actively. But the research against a data process is not coming out the accurate research method. It follows a financial one bicycle road design standard from ministry of land, Transport and maritime affairs. But vertical grade in bicycle road design standard is exception becoming that about unavoidable case with geomorphic environments. From the research which it sees the existing bicycle road consider should have to make the terrain situation of yeosu, slope standard connection about under considering it presented the bicycle road route selection which is possible. It included a lane and road width with additional element and establishment in the bicycle road was produced suitable bicycle road route. The area where the mountain district is many when selecting bicycle road, will be used with application plan of slope standard.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.79-90
• /
• 2007

In determining vertical grades in highway alignment design, engineers usually consider heavy vehicle performances on the upgrade. Heavy vehicles usually experience speed reduction on the upgrade and with recent years weight/horsepower improvements for heavy vehicles the speed reduction shows some change. However, in spite of the weight to horsepower improvements for the design vehicles from 300lb/HP to 200lb/HP in the AASHTO, there was no change in the maximum vertical grades. Therefore, a review of the maximum vertical grade reflecting existing heavy vehicle performances is required. In particular, in South Korea where highways pass through lots of mountaineous terrain, the maximum vertical grades must be reviewed throughly. In this study the amount of heavy vehicle performances during past decades were investigated and their expected impacts on highway vertical alignment designs were subsequently analyzed. A worldwide terrain analysis and international design standards were compared to set South Korean vertical grade standards. Traffic flow simulation Vissim was utilized to simulate vehicular flows on the upgrade and new truck performance curves on the grades were developed. Based on the new curve, it was decided that $1{\sim}2%$ increase of the maximum vertical grades could be allowed.