• Title/Summary/Keyword: 도로지형

Search Result 538, Processing Time 0.026 seconds

Base Station Antenna of Radiation Pattern for the Cruciform using Monopole Array (도심지 교차로 지형에 맞는 방사패턴 형성을 위한 기지국용 모노폴 어레이 안테나)

  • 문상만;우종명;신헌철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.9
    • /
    • pp.964-970
    • /
    • 2002
  • In this paper, cruciform radiation pattern antenna was designed and fabricated. The fabricated antenna is applicable to intersections which is composed of four eight-lane roads each having 60 m of width and 200 m of length. The design theory was based on Woodward-Lawson method and the 6 monopole elements with the strip feeding network are made by linear array on the micro-strip board. In the results, - 13.5 dB of return loss and 120 MHz(6 %) of -10 dB bandwidth were obtained at the 2 GHz. Also, at 1.95 GHz, -6 dB of gain fall was seen at $\pm$45$^{\circ}$ and thus, it is possible to say that the presented antenna has well-shaped cruciform radiation pattern.

The Research about Map Model of 3D Road Network for Low-carbon Freight Transportation (저탄소 화물운송체계 구현을 위한 3차원 도로망도 모델에 관한 연구)

  • Lee, Sang-Hoon
    • Spatial Information Research
    • /
    • v.20 no.4
    • /
    • pp.29-36
    • /
    • 2012
  • The low-carbon freight transportation system was introduced due to increase traffic congestion cost and carbon-dioxide for global climate change according to expanding city logistics demands. It is necessary to create 3D-based road network map for representing realistic road geometry with consideration of fuel consumption and carbon emissions. This study propose that 3D road network model expressed to realistic topography and road structure within trunk road for intercity freight through overlaying 2D-based transport-related thematic map and 1m-resolution DEM. The 3D-based road network map for the experimental road sections(Pyeongtaek harbor-Uiwang IC) was verified by GPS/INS survey and fuel consumption simulation. The results corresponded to effectively reflect realistic road geometry (RMSE=0.87m) except some complex structure such as overpass, and also actual fuel consumption. We expect that Green-based freight route planning and navigation system reflected on 3D geometry of complex road structure will be developed for effectively resolving energy and environmental problems.

Noise Simulation of Road Traffic in Urban Area Using LiDAR Data for U-City Construction (U-City 건설을 위한 LiDAR 자료를 이용한 도심지 도로교통소음 영향의 시뮬레이션 분석)

  • Cho, Jae-Myoung;Lee, Dong-Ha;Yun, Hong-Sic;Lee, Seung-Huhn
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.25 no.3
    • /
    • pp.199-205
    • /
    • 2007
  • In this study, we have intended to precisely analyze the aspect of propagation and the extent of damage due to the traffic noise as hon as a main source of noise in urban area. The propagation of traffic noise has a strong relationship between distance and shape of surface. Thus, it is necessary to consider the distribution of buildings for estimating effects of noise in urban area because noise propagations will be affected by buildings. For this, we developed the DEM and DBM using the airborne LiDAR data in the study area and compared with results from the noise simulations using the each model. The extent of damage occurred by the traffic noise above 60 dB(A) from the case of DEM were shown at the 60% of a whole study area, whereas the extent from other case of DBM were shown at the 30% of a whole study area. Also, the extent of the noise levels between 45 dB(A) and 50 dB(A) will be generally recognized as calm environment was increased(the 0% to the 43%) in the case which simulated with building informations. These results indicated that the shape informations of buildings like a DBM is a essential source to simulate the propagation of traffic noise in urban area especially. With results in this study, the effect of traffic noise at a specific area will be easily and precisely estimated if we have the LiDAR data and a traffic census for Korea. Furthermore specific area's traffic noise simulation could be possible using only road traffic information once we have DBM data from LiDAR surveying. This also could be applied as a base data for noise pollution petitioning, traffic planning, construction, etc. in huge city planning projects like a U-City.

Analysis of Bed Elevation Change in the Han River Estuary using SED-2D (SED-2D를 이용한 한강 하구부의 하상변동 해석)

  • Seo, Il-Won;Jun, In-Ok;Kim, Sung-Eun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.1770-1774
    • /
    • 2010
  • 하구는 담수와 해수가 만나 넓은 갯벌과 기수역을 형성하여 각종 생물의 서식지이자 어류의 산란지로 이용되는 생태학적으로 중요한 지역이다. 특히 한강 하구는 국내 4 대강 가운데 유일하게 하구둑이 설치되어 있지 않아 조수의 출입이 자유롭고 민간인 접근이 통제되어 있어 자연적인 하천지형과 기수역 생태계가 비교적 잘 보전된 구역이다. 본 연구의 모의영역은 한강 하류부로 상류 경계단은 행주대교, 하류 경계단은 전류단 수위표가 위치한 경기도 연천군 전곡읍 전곡 사랑교 부근으로 설정하였다. 지형자료는 한국건설기술연구원에서 2009년 8월 홍수사상 전 후에 대해 측량한 자료를 사용하였다. 한강 하구역에 대한 지형 격자를 구성하기 위하여 RAMS 전후 처리기인 RAMS-GUI를 사용하였으며, 구성된 지형 격자의 절점 수는 2,354개, 요소 수는 2,145개로 삼각요소와 사각요소가 혼용되어 있다. 구성된 격자망을 이용하여 2차원 하상변동 해석 모형인 SED-2D 모의를 통해 홍수사상에 의한 한강 하구부의 하상변동을 살펴보았다. SED-2D 모형은 미국 육군 공변단의 WES와 미 연방 도로국이 연계하여 개발되어 현재 국내외 2차원 하천해석에서 가장 널리 사용되고 있는 모형 중 하나이다. 하상변동 해석모형인 SED-2D를 통해 모의된 하상 변동량을 실제 측량된 홍수 전 후의 지형자료와 비교함으로써 모형의 성능을 분석하였다. 분석결과 SED-2D 모형의 경우 침식에 의한 하상변동이 모의되지 않았지만, 전반적인 하상변동 경향을 살펴볼 수 있음을 알 수 있었다.

  • PDF

The design load factor of road structure considering long-term coastal geographic change (해안지형의 장기적 변화에 따른 도로 구조물 설계하중 고려 요소에 관한 연구)

  • Bae, Sun-Hak;Kang, Sang Hyeok
    • Journal of The Geomorphological Association of Korea
    • /
    • v.20 no.1
    • /
    • pp.75-83
    • /
    • 2013
  • Human-induced modifications in coastal area may cause strong geomorphic responses by disturbing sediment supply, transport and deposition regimes. Morever, engineering structure have been built to stabilize coastal change, these effort impact on other morphologic change. In case of coastal area, there are lack of sediment yield data. This study focus on the tendency of long-term shoreline change, estimate method od sediment discharge which is a major factor of coastal change and adduced to way for considering design load influenced to coastal road.

Development of Cognition Character Model for Road Safety Facilities on Vertical Alignment Sections (종단선형구간에서의 도로안전시설물 인지특성 모형개발)

  • Lee, Soo-Beom;Kim, Jang-Wook;Kwon, Hyuk-Min
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.3 s.81
    • /
    • pp.73-84
    • /
    • 2005
  • Highway design criteria are considering roadway safety and smooth driving maneuver. However, a certain highway alignment within design criteria often leads drivers to undesirable situation due to the differences between the original intention of design criteria and the unintended result of drivers' cognition. The differences between them often result in traffic accidents. In order to reduce accident process, highway safety facilities are installed on those roadway sections. However, the relationship between highway environments and human factors has not been deeply studied in Korea. In this study. vertical roadway sections are constructed with 3-D graphical tools. This vertical roadway sections are simulated on a driving simulator in order to identify the differences of drivers' cognition on different roadway environments. Based upon the collected data from the driving simulator, canonical correlation analysis and canonical discriminant analysis of quantification theory II have been performed in order to figure out impacting factors on the degree of roadway safety. Also, based upon quantification theory I. the relationship between roadway safety facilities and the degree of safety has been analyzed.

수치지도 제작을 위한 지형ㆍ지물의 경계추출

  • 박운용;차성렬;이동락;김용석
    • Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
    • /
    • 2003.10a
    • /
    • pp.433-437
    • /
    • 2003
  • 고해상도 위성영상을 이용하여 수치표고모델(DEM) 및 정사영상을 제작해서 수치지도의 갱신 및 지형공간정보체계의 자료기반으로써 활용할 수 있다. 본 연구에서는 Sobel 연산자를 이용하여 경계추출을 행한 후 스크린 디지타이징 방법으로 경계선을 추출하였다 이렇게 추출된 벡터자료와 기존수치지도와의 중첩을 통해서 건물, 도로, 임야의 평균위치오차를 분석해 보았다. 평균위치오차가 공공측량의 작업규정에 대한 1 : 5,000 수치지도 제작의 허용오차범위에는 들지 못하였지만, 특정 부분의 지형·지물의 경우에는 수정, 보완이 가능한 것으로 나타났다. 그리고, 산악지역 보다는 도심지에서의 경계추출이 뚜렷하기 때문에 위치정밀도가 향상됨을 알 수 있었다.

  • PDF

Analysis Method of Ground Roughness Factor Using GIS (GIS를 이용한 지표면조도 분석방안)

  • Seong, Min-Ho;Park, Kyung-Sik;Choi, Se-Hyu
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2010.09a
    • /
    • pp.273-276
    • /
    • 2010
  • 도시화가 진행됨에 따라 고층아파트와 고층빌딩 등 지형지물의 변화가 많이 일어나고 있다. 지형지물의 변화는 강풍 발생의 원인으로 작용하며 풍속은 풍상측 지형지물의 영향으로 같은 속도의 바람이 불어올지라도 그 값이 증가 또는 감소한다. 설계기준에서는 이러한 변화를 지표면조도로 정의하고 지표면 상태에 따라 구분하고 있지만 실제 건설지점의 지표면조도를 구분하기 위한 연구와 자료는 거의 전무한 실정이다. 본 논문에서는 최근 고층아파트가 많이 건설된 연구지역을 대상으로 실제 건축물 수직높이에 따른 지표면조도를 GIS프로그램을 이용하여 구분함으로써 풍하중 풍속설계 시 정확한 지표면조도 구분을 위한 방안을 제시하고자 한다.

  • PDF

Study on the Image Information Analysis for Inaccessible Area (비접근 지역에 대한 영상정보 분석 연구)

  • 함영국;김영환;신석철
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 1998.10a
    • /
    • pp.343-348
    • /
    • 1998
  • In this study, we extracted several terrain information using satellite and aerial images. We detected change of terrain using Landsat Thematic Mapper(TM) and aerial images which are multitemporal data. In change detection processing, we first classified satellite images by ISODATA algorithm which is an unsupervised learning algorithm, then performed change detection. By this method, we could obtain good result. Also we introduce sub-pixel concept to classify road and agriculture area in inaccessible area. In summary, in chang detection processing, we can find that the used method is efficient.

  • PDF

A Study for Vegetation Points Density and LiDAR Contour Filtering (식생밀도분포 및 등고선의 단계별 필터링에 관한 연구)

  • Kim, Eun-Young;Han, Seong-Man
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2008.10a
    • /
    • pp.21-25
    • /
    • 2008
  • 최근 측량기술이 발전함에 따라 다양한 지형공간정보를 획득할 수 있게 되었다. 특히 레이저스캐닝 기술의 도입은 정밀한 지형과 식생 및 인공지물 등에 대한 정보를 신속하게 획득하여 원하는 최신 정보를 가공할 수 있게 되었다. 본 연구에서는 라이다의 식생 데이터에서 점의 밀도 분포를 통하여 정량적인 식생분포 분석을 실시하였다. 또한, 정밀한 지형 모델에 대하여 생성되는 라이다 등고선의 효율적인 활용을 위하여 단계별로 필터링을 실시하여 정확성은 유지하면서 저용량의 등고선을 생성하고 도로 및 엔지니어링 분야 활용을 높일 수 있도록 하였다. 이러한 지능적이고 과학적인 연구는 국내 라이다데이터의 적극적인 활용성을 높이고 누구나 쉽게 사용할 수 있도록 하는데 목적이 있으며, 건설 분야뿐만 아니라 생태지도 및 주제도, 재해 환경 분야, 홍수지도, 도시모델링 등 다양한 분야의 활용성을 가능하도록 한다.

  • PDF