• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.9-15
• /
• 1991

This study is directed for the development of rational rating models for realistic safety assessment and the computer rating system for highway bridges. For this purpose, the conventional rating system is considerably improved in appropriate way, and a rational rating system based on the reliabilty method is proposed to estimate safety of deteriorated bridges by using only the visual inspection data or the statistical data available. In addition. the rating system which can assess the realistic allowable passing tonnage of military vehicles in case of the military operations is also presented. From this study, it is known that the presented rating system and the computer program BRS(Bridge Rating System) provide an effective tool which can handle the degree of deterioration and various uncertainities of the bridge systematically. so it can be used widely for assessment of safety and load carrying capacity of existing deteriorated or damaged bridges.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.85-94
• /
• 2016

Lane Designation is defined as reasonable road management to ensure the road safety and enhance road efficiency. While the lane designation system was abolished in 1999, it was redefined because of the increasing number of large vehicles in the passing lane, violent on driving and traffic accidents in 2000. The needs of improvement on operating the lane designation has been increasing more in recent due to the low ratio of compliance with the system and difficulties to keep the right lane due to need of turning and demand of widening of designates lane for two-wheeled vehicles and truck. In this study, we presented the improvement plan through the question survey, simulation analysis, safety evaluation. It found a problem that the low-speed vehicle is to use the upper level roadway, difficulties of supervision, the imbalance in the lane use, imbalance traffic and does not match the international standards. This study suggested five different alternatives through the survey. micro simulation has used in order to examine each alternative by management effectiveness and feasibility. It analyzed the traffic speed, efficiency, traffic balance of alternatives. Also, safety evaluation conducted in terms of the range of field-of-view to ensure the easiness of field of view by various configurational difference between the vehicles. By the analysis results of such indicators, This study presents proposals for improvement in operating designated lane that low-speed-big-sized vehicles keep to the right lane, and high-speed-small sized vehicles keep to the left lane.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.133-144
• /
• 2003

The current procedure of estimating accident reduction benefit shows fixed accident rates for each level of roads without considering the various characteristics of roadway geometries, and traffics. In this study, in order to solve the problems mentioned in the above, models were developed considering the characteristics of roadway alignments and traffic characteristics. The developed models can be used to estimate the accident rates on new or improved roads, In this study, only urban highways were included as a beginning stage. First of all. factors influencing accident rates were selected. Those factors such as traffic volumes. number of signalized intersections, the number of connecting roads, number of pedestrian traffic signals, existence of median barrier, and the number of road lane are also selected based upon the obtainability at the planning stage of roads. The relationship between the selected factors and accident rates shows strong correlation statistically. In this study, roads were classified into 4 groups based on number of lanes, level of roads and the existence of median barriers. The regression analysis had been performed for each group with actual data associated with traffic, roads. and accidents. The developed regression models were verified with another data set. In this study, in order to develop the proposed models, only data on a limited area were used. In order to represent whole area of the country with the developed models. the models should be re-analyzed with vast data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.51-59
• /
• 1993

This paper develops practical and realistic reliability models and methods for the evaluation of system-reliability and system reliability-based rating of various types of box-girder bridge superstructures. The strength limit state model for box-girder bridges suggested in the paper are based on not only the basic flexural strength but also the strength interaction equations which simultaneously take into account flexure, shear and torsion. And the system reliability problem of box-girder superstructure is formulated as parallel-series models obtained from the FMA(Failure Mode Approach) based on major failure mechanisms or critical failure states of each girder. In the paper, an improved IST(Importance Sampling Technique) simulation algorithm is used for the system reliability analysis of the proposed models. This paper proposes a practical but rational approach for the evaluation of capacity rating in terms of the equivalent system-capacity rating corresponding to the estimated system-reliability index which is derived based on the concept of the equivalent FOSM(First Order Second Moment) form of system reliability index. The results of the reliability evaluation and rating of existing bridges indicate that the reserved reliability and capacity rating at system level are significantly different from those of element reliability or conventional methods especially in the case of highly redundant box-girder bridges.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.125-136
• /
• 2005

The current traffic accident reduction procedure in economic feasibility study does not consider the characteristics of road and V/C ratio. For solving this problem, this paper suggests methods to be able to evaluate safety of each road in construction and improvement through developing accident Prediction model in reflecting V/C ratio Per road types and traffic characters. In this paper as primary process, model is made by tke object of urban roads. Most of all, factor effecting on accident relying on road types is selected. At this point, selecting criteria chooses data obtained from road planning procedure, traffic volume, existence or non-existence of median barrier, and the number of crossing point, of connecting road. and of traffic signals. As a result of analyzing between each factor and accident. all appear to have relatives at a significant level of statistics. In this research, models are classified as 4-categorized classes according to roads and V/C ratio and each of models draws accident predicting model through Poisson regression along with verifying real situation data. The results of verifying models come out relatively satisfactory estimation against real traffic data. In this paper, traffic accident prediction is possible caused by road's physical characters by developing accident predicting model per road types resulted in V/C ratio and this result is inferred to be used on predicting accident cost when road construction and improvement are performed. Because data using this paper are limited in only province of Jeollabuk-Do, this paper has a limitation of revealing standards of all regions (nation).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.77-84
• /
• 2017

Recently, interest in safety has been increasing in every area, especially in the field of transportation. The accurate evaluation of the stability of road facilities is needed to improve the level of safety in the field of transportation and the application of new technologies is required to reduce the number of natural disasters. In this study, the wind data were compared and analyzed according to the type of measurement, and an evaluation of the stability of road signs using the wind data was conducted. In addition, a stability plan to secure road signs was elaborated and its effect on the wind load was analyzed. It was found that the wind data measured by a mobile atmospheric observing system (MAOS) was 2.43 times bigger than that measured by the Korea meteorological administration (KMA) and road weather information system (RWIS). In terms of their stability, the road signs were susceptible to failure caused by gusty winds and it was found necessary to ensure their stability. In the future, it will be possible to evaluate the stability of road facilities using road line weather data and the application of wind load reduction technologies is expected to improve road safety.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.135-142
• /
• 2014

As interest in social safety has recently increased at the national level, the various activities which can effectively prevent crimes are being carried out. Because the existing maps related to crimes provide the information about the present condition of crimes by administrative district for users, women and pedestrians who go by night could not actually grasp safe roads in advance. Therefore, this study developed the methodology that can easily extract dangerous areas due to crimes by the digital map 2.0. In the digital map 2.0, location and attribute information of center-lines of roads and building layers were used to find dangerous areas of crimes in these layers. Pavement materials and road width which are already built by the attribute information were used in the center-lines of roads. Crossing angles that roads and roads cross each other were additionally extracted and utilized. The attribute information about building types were input in the building layers of the digital map 2.0. The areas that are more the threshold values set by totaling up all the risk scores when considering pavement materials, road width, crossing angles of road, and building types in the center-lines of roads and road crossings were extracted as the dangerous areas that crimes can occur. Verification of the developed methodology was done by experiment. In the spatial apsect, the dangerous areas of crimes could be found by using the digital 2.0, roads, and building layers only through the experiment. In the administrative aspect to prevent crimes, additional installation of safety facilities such as street lights and security lights in the identified areas which are vulnerable for crimes is thought to be increasing safety of dangerous areas.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.9-17
• /
• 2011

It is possible to set up the Roadside Barrier which is suitable for Performance Evaluation Criteria by domestic standard. But a number of section of expressway roadside have old guardrail that was installed before reform the guideline. These poor performance guardrails threaten driver's life. There is lots of difficult problem to change old guardrails that are installed 2,777km in expressway of whole road side at the same time. Especially budget problem. The purpose of study is to develop performance improvement guardrails by the minimum reinforcement. In this study, guardrail improvement method(SB1, 3, 5 grade) is developed through crash simulation using LS-DYNA 3D and vehicle crash test. And it's expected not only to decrease of collision accident but to increase safe level. Of course one thing that can't be missing is to reduce a lot of budget of guardrail change.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.70-78
• /
• 2002

Advanced safety vehicle (ASV) equipped with intelligent drivers advisory functions for controlling vehicle to follow the lead vehicle and/or warning drivers on forward traffic impediments according to the roadway and traffic circumstances has been recently developed and on the market internationally. Standardization processes for ASV system functions have been issued in IS0/TC204 Working Group 14 (Vehicle/Roadway Warning and Control System) since 1995. Research projects developing test and evaluation technologies for ASV in establishing safety standards and/or conformity related to the national roadway and traffic circumstances are under study internationally. In Korea, an integrated test and evaluation Program was developed for the assessment of adaptive cruise control (ACC) system under the ITS research and development projects funded by the Ministry of Construction and Transportation (MOCT). This paper demonstrates the integrated test and evaluation Programs for ACC system based on the draft international standard with related to the domestic roadway and traffic conditions. Field tests fulfilled under the scenarios based on the integrated test & evaluation programs for ACC system are discussed along with a review of earlier research work regarding international standards and the safety regulations.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.94-100
• /
• 2008

Available transfer capability(ATC) quantifies the viable increase in real power transfer from one point to another in a power system. ATC calculation has predominantly focussed on steady-state viability. But ATC assessment with transient stability constraints has a dominant part in overall ATC calculation. ATC assessment requires a reputation of (n-1) security assessment with constraints of thermal limits, voltage stability and dynamic stability. An estimation of determinant contingency screening method is used for computing eigenvalue of Jacobian matrix. This paper proposed a methods to ATC calculation using energy function. Constraints is used thermal limits, voltage stability and transient stability.