• Journal of the Korean GEO-environmental Society
• /
• v.3 no.4
• /
• pp.59-66
• /
• 2002

Designs for rockfall protection systems must consider rock and soil types, the angle of the slope, conditions on top and the toe of the affected area. Rockfall protection fence is installed to block for falling rock from cut slopes and this is one of the most common rockfall protection measures. The capability of the fence is provided that sum of capability of poly vinyl chloride coated wire mesh, steel support and wire rope respectively. But in some case, the rockfall protection fence was not supported rockfall energy less than total capability of the fence through the full scale rockfall tests. Therefore, the objectives of this paper are to indicate the problems of fence capability and to improve the design specifications for the fence.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.3
• /
• pp.47-54
• /
• 2011

The rockfall protection fence installed to secure safety against rockfall occurring in cut slope has been designed under the condition with 50kJ of impact energy arising when the 400kg of rock block is falling from 12.5m height. However, in falling case of bigger rock block or from higher place, it is hard to be secure of safety with existing rockfall protection fence. Using the rockfall program, safety analysis for rockfall is conducted in this paper by changing slope height, separating distance from fence, and slope angle, according to rock block sizes. In the result of analysis, when a 400kg of rock block which is designed load is fallen, the existing rockfall protection fence with 2.5m height can secure most of rock fall except some cases for the slope having 20m or less hight, whereas for more than 20m height, the fallen rock is frequently splattered over the rockfall protection fence, as well as the impact energy of rockfall may exceed designed impact energy. Therefore, in the design of rock fence, it is considered appropriate to design that after conducting safety review for rockfall according to the ground conditions, evaluating the bounce height and impact energy of rock fall, and then installing appropriate rockfall protection fence would be applicable rather than just following standards based design drawing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.95-97
• /
• 2023

낙석에 대한 시뮬레이션과 낙석 발생 예측 연구들이 상당히 진행되었으며 낙성 피해 방지를 위한 낙석방지시설들을 꾸준히 설치되고 있으나 2023년 4월에도 자동차 전용 도로에서 낙석에 의한 피해가 발생하고 있다. 따라서 본 논문을 통해 운전자들에게 낙석 발생 사실을 미리 알릴 수 있도록 자동차 전용 도로에서 발생하는 진동 데이터들을 중심으로 낙석이 발생하면 탐지할 수 있는 합성곱 모델을 연구한다.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.49-57
• /
• 2009

The governmental investment to SOC facilities currently has increasedthe construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads. As a result, the road cut slopes have been increasingrapidly. Unfortunately, human-life damages and property damages frequently occur due to the rockfall and the landslide every year. To reduce those damages, many studies have been performed. The present regulation regarding rockfall protection facilities follows the "Guide for Installation and Management of Road Safety Facilities" issued by MLTM (the Ministry of Land, Transport, and Maritime Affairs) that indicates the standard size of facilities and energy absorbing efficiencies. Most domestic road slopes use standardized rockfall protection facilities based on the regulation. However, there have been doubted about the effectiveness of rockfall protection facilities and the damages caused by rockfalls havebeen increasedevery year. Thus, it seems that relevant studies are necessary on the rockfall protection net being capable of supporting rockfall energies. Accordingly, this study reviews previous literature to investigate the function and the feature of rockfall protection nets and analyzetheir limitations by each type. After that, by using the pullout test device for a rockfall protection net, an experiment on the PVC coating net and the expanded metal is performed under the exact same condition. Finally, the features of the Expended metal is explained with the comparison analysises of load-variation and the confirmation of damaged forms. As a result, there have been founded the problemsof net breaking down and not being able to support due to PVC coating net's material property of disintegration. On the other hand, the Expanded Metal might be expected as a substituteof rockfall protection net according to its capability of support and integration.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.353-363
• /
• 2012

The geology of Ulleung-Do is dominated by volcanic rocks with low strength and trachytic rocks with high strength but containing vertical joints that yield easily. Consequently, rockfalls along roadcuts are a major geological hazard, with the potential to affect the ring road of Ulleung-Do. In this study, we performed three types of rockfall hazard-risk assessment on the 3-km-long section of the ring road expected to have the highest possibility of rockfall. We used a rockfall ranking sheet in a roadside landslide hazard map, the Slope Stability Inspection Manual for National Highways (Japan), and a rockfall hazard rating system for inspection from the Japan Highway Public Corporation. We also employed the evaluation criteria of 'RHRS' developed by the Federal Highway Administration (FHA). An analysis of roadcuts at 27 sites with regard to geographic and geological conditions resulted in the identification of three classes of rockfall hazard (high, medium, and low). Of note, over 74% of slopes were assessed as high- and medium-class. Finally, a rockfall hazard map of the northeast region of Ulleung-Do was produced based on the evaluation results.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.47-56
• /
• 2010

The construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads are increased with the governmental investment to SOC facilities currently. Accordingly, the road cut slopes are in the trend of rapidly increasing. As the road slope has increased, a lot of human and property damages has entailed consequently and in the local case, numerous studies have carried out aiming at minimizing this damages caused by the rockfall and landslide. In general, standard falling rock prevention facility has employed for most of the local road slope based on "Guide for Installation and Management of Road Safety Facilities" published by MLTM(the Ministry of Land, Transport, and Maritime Affairs) but profound doubt has raised as to whether this rockfall prevention facility would function properly enough to prevent rockfall efficiently without any damages in case of actual occurrence of rockfall. In addition, it is a reality that in most cases, such work is relied on overseas technology as a whole as the local technical level is low and in case of rockfall prevention net, it is judged that a study on rockfall prevention net that is able to endure more powerful rockfall energy is required as the problem including net bursting is taken place as a result of enough bearing force being failed to be demonstrated due to its partial weak point(not uniformly made). Under this background, in this study, three kinds of model depending on mesh size of expanded metal that is considered to have an adoptability as rockfall prevention net, as target are selected and characteristics depending on mesh size of expanded metal is intended to be researched through a pull-out test performance by using pull-out test equipment rockfall prevention net.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.375-382
• /
• 2020

Rock drop obstacles on major roads in the border area in South Korea has been installed and operated to prevent and block the movement of enemy units. However, the increase in traffic volume due to the development of the border region causes many problems such as road traffic congestion due to rock drop, traffic safety, and impaired urban aesthetics. Therefore, this study aimed to provide guidelines for demolition and replacement facility installation for rock drop obstacles, which are differently applied to each unit, and to suggest the direction of the Ministry of National Defense's policy regarding maintenance cost for necessary rock drop obstacles required for operation. In this study, as part of a guideline study on the removal of rock drop obstacles and the installation of alternative facilities, a standard unit price was suggested for essential rock drop obstacles, so as to be used as judgment data when deciding whether to remove rock drop obstacles.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.214-224
• /
• 2003

현재 국내에서 사용중인 낙석방지용 울타리는 낙석의 낙하운동에너지를 낙석방지망과 와이어 로프 및 지주에 의한 결합으로 흡수하는 역할을 하고 있으며 이중 와이어로프는 커다란 인장강도로 인하여 대형 낙석의 도로유입을 차단하는 중요한 역할을 하고 있다. 정력학적 관점에서는 와이어 로프는 인장강도가 큰 이유로 인하여 큰 하중을 지지할 수 있으나 그 변형량이 제한되는 이유로 인하여 낙석의 운동에너지를 흡수하는 측면에서 효율성이 저하되는 것이 일반적인 특성이다.(중략)

• The Journal of Engineering Geology
• /
• v.12 no.1
• /
• pp.53-61
• /
• 2002

Cut-slope due to the road construction is one of the most significant problems in the domestic case, that is, 70% of the land is covered by mountain. Moreover, typhoons or heavy rains concentrated in summer season causes the failure of cut-slope. Rock-fall and soil slope failure take 40.8% and 29.5% out of the entire domestic cut-slope failure, respectively. Rock-fall is quickly occurred by the free fall or rolling of rock fragments generally in the upper slope. Soil slope failure produces a clastics-flow and increases casualty especially when caused by heave rainfall because the velocity of the movement is verb high. Considering the car speed and rock-fall velocity, it will take a life in a moment. This study analyzes a set of field data of most recently collapsed domestic road cut-slopes to characterize these cut-slopes and the nature of rock-falls and clastics flows at each site. Based on the results, design criteria for a road alarm system are proposed, considering the relationship between the time required for clastics-flow and the velocity and braking distance of a cat at the incidence. The road alarm system proposed herein would operate instantly after a rock-fall and it will minimize damages, by warning drivels approaching to the collapse or collapsing location in advance.

• 한국도로학회지:도로
• /
• v.5 no.2 s.16
• /
• pp.18-22
• /
• 2003