• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.13-19
• /
• 2023

Following the signing of the Paris Agreement on Climate Change (UNFCCC, 2015), the world is expanding greenhouse gas reduction activities through comprehensive participation that includes not only developed countries but also developing countries. Major countries around the world are placing high expectations on the effectiveness of total carbon emissions regulation through the carbon emissions market. However, in order to obtain carbon credits, third-party verification is required based on quantitative carbon reduction data. Accordingly, in this paper, we developed an AIoT high-efficiency street light for carbon emissions and conducted a performance analysis study to measure the luminous efficiency of the lighting fixture. To obtain carbon emissions rights, we used high-efficiency LED PKG, developed our own high-voltage PFC, and developed high-efficiency lighting fixtures capable of communication. For communication, the 2.4GHz LoRa method was adopted between the lighting fixture and the gateway. Lens design was conducted through simulation of Korea Expressway Corporation's standard streetlight types A, B, and C. The performance of the streetlight was verified as being more efficient than other existing products through the measurement of luminous efficiency by an accredited rating agency, and it is expected that carbon emissions rights will be obtained by reducing electrical energy through this.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.130-144
• /
• 2023

Recently, various positioning technologies are being researched based on signal-based positioning and image-based positioning to obtain accurate indoor location information. Among these, various studies are being conducted on image positioning technology that determines the location of a mobile terminal using images acquired through cameras and sensor data collected as needed. For video-based positioning, a method of determining indoor location is used by matching mobile terminal photos with virtual landmark images, and for this purpose, it is necessary to build indoor spatial information about various landmarks such as billboards, vending machines, and ATM machines. In order to construct indoor spatial information on various landmarks, a panoramic image in the form of a road view and accurate 3D survey results were obtained through c 13 buildings of the Electronics and Telecommunications Research Institute(ETRI). When comparing the 3D total station final result and the terrestrial lidar panoramic image coordinates, the coordinates and distance performance were obtained within about 0.10m, confirming that accurate landmark construction for use in indoor positioning was possible. By utilizing these terrestrial lidar achievements to perform 3D landmark modeling necessary for image positioning, it was possible to more quickly model landmark information that could not be constructed only through 3D modeling using existing as-built drawings.

• Information Systems Review
• /
• v.24 no.2
• /
• pp.1-20
• /
• 2022

Researchers are making contradictory claims through the concept of superstars and long tails about how the development of IT technology affects demand distribution. Unlike previous studies that focused on changes in demand from a macro point of view, this study explored whether the relationship between a company's marketing activities and consumer response differs depending on the product location (i.e., superstar vs. long tail) from a micro point of view. Based on the marketing mix framework, hypotheses were developed based on the relevant literature. In the case of empirical analysis, 2,835 daily data from 63 Korean films were tested using the quantile regression method. As a result of the analysis, it was found that the influence of marketing mix factors on sales varies depending on the location of the product. Specifically, the appeal breadth of the film and the effect of owned media are enhanced in superstar products, and the effect of acquisition media in long-tail products is enhanced and the negative effects of competition are mitigated. Unlike previous studies that focused on macroscopic changes in demand distribution, this study suggested marketing activities suitable for practitioners through microscopic analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.173-178
• /
• 2024

This study presents a technique for assessing the dimensional quality of assembly parts in Prefabricated Steel Structures (PSS) using a stereo vision sensor. The stereo vision system captures images and point cloud data of the assembly area, followed by applying image processing algorithms such as fuzzy-based edge detection and Hough transform-based circular bolt hole detection to identify bolt hole locations. The 3D center positions of each bolt hole are determined by correlating 3D real-world position information from depth images with the extracted bolt hole positions. Principal Component Analysis (PCA) is then employed to calculate coordinate axes for precise measurement of distances between bolt holes, even when the sensor and structure orientations differ. Bolt holes are sorted based on their 2D positions, and the distances between sorted bolt holes are calculated to assess the assembly part's dimensional quality. Comparison with actual drawing data confirms measurement accuracy with an absolute error of 1mm and a relative error within 4% based on median criteria.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.48-56
• /
• 2023

The technology of Three-dimensional human posture estimation is used in sports, motion recognition, and special effects of video media. Among various methods for this, multi-view 3D human pose estimation is essential for precise estimation even in complex real-world environments. But Existing models for multi-view 3D human posture estimation have the disadvantage of high order of time complexity as they use 3D feature maps. This paper proposes a method to extend an existing monocular viewpoint multi-frame model based on Transformer with lower time complexity to 3D human posture estimation for multi-viewpoints. To expand to multi-viewpoints our proposed method first generates an 8-dimensional joint coordinate that connects 2-dimensional joint coordinates for 17 joints at 4-vieiwpoints acquired using the 2-dimensional human posture detector, CPN(Cascaded Pyramid Network). This paper then converts them into 17×32 data with patch embedding, and enters the data into a transformer model, finally. Consequently, the MLP(Multi-Layer Perceptron) block that outputs the 3D-human posture simultaneously updates the 3D human posture estimation for 4-viewpoints at every iteration. Compared to Zheng[5]'s method the number of model parameters of the proposed method was 48.9%, MPJPE(Mean Per Joint Position Error) was reduced by 20.6 mm (43.8%) and the average learning time per epoch was more than 20 times faster.

• Journal of the Korea Society for Simulation
• /
• v.33 no.1
• /
• pp.1-17
• /
• 2024

Forest management is known to beneficially influence stand structure and wood production, yet quantitative understanding as well as an illustrative depiction of the effects of different management approaches on tree growth and stand dynamics are still scarce. Long-term management of beech forests must balance public interests with ecological aspects. Efficient forest management requires the reliable prediction of tree growth change. We aimed to develop a novel hybrid simulation approach, which realistically simulates short- as well as long-term effects of different forest management regimes commonly applied, but not limited, to German low mountain ranges, including near-natural forest management based on single-tree selection harvesting. The model basically consists of three modules for (a) natural seedling regeneration, (b) mortality adjustment, and (c) tree growth simulation. In our approach, an existing validated growth model was used to calculate single year tree growth, and expanded on by including in a newly developed simulation process using calibrated modules based on practical experience in forest management and advice from the local forest. We included the following different beech forest-management scenarios that are representative for German low mountain ranges to our simulation tool: (1) plantation, (2) continuous cover forestry, and (3) reserved forest. The simulation results show a robust consistency with expert knowledge as well as a great comparability with mid-term monitoring data, indicating a strong model performance. We successfully developed a hybrid simulation that realistically reflects different management strategies and tree growth in low mountain range. This study represents a basis for a new model calibration method, which has translational potential for further studies to develop reliable tailor-made models adjusted to local situations in beech forest management.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.77-81
• /
• 2009

Purpose: The PET of the PET/CT (Positron Emission Tomography/Computed Tomography) quantitatively shows the biological and chemical information of the body, but has limitation of presenting the clear anatomic structure. Thus combining the PET with CT, it is not only possible to offer the higher resolution but also effectively shorten the scanning time and reduce the noises by using CT data in attenuation correction. And because, at the CT scanning, the contrast media makes it easy to determine a exact range of the lesion and distinguish the normal organs, there is a certain increase in the use of it. However, in the case of using the contrast media, it affects semi-quantitative measures of the PET/CT images. In this study, therefore, we will be to establish the reliability of the SUV (Standardized Uptake Value) with CT data correction so that it can help more accurate diagnosis. Materials and Methods: In this experiment, a total of 30 people are targeted - age range: from 27 to 72, average age : 49.6 - and DSTe (General Electric Healthcare, Milwaukee, MI, USA) is used for equipment. $^{18}F$- FDG 370~555 MBq is injected into the subjects depending on their weight and, after about 60 minutes of their stable position, a whole-body scan is taken. The CT scan is set to 140 kV and 210 mA, and the injected amount of the contrast media is 2 cc per 1 kg of the patients' weight. With the raw data from the scan, we obtain a image showing the effect of the contrast media through the attenuation correction by both of the corrected and uncorrected CT data. Then we mark out ROI (Region of Interest) in each area to measure SUV and analyze the difference. Results: According to the analysis, the SUV is decreased in the liver and heart which have more bloodstream than the others, because of the contrast media correction. On the other hand, there is no difference in the lungs. Conclusions: Whereas the CT scan images with the contrast media from the PET/CT increase the contrast of the targeted region for the test so that it can improve efficiency of diagnosis, there occurred an increase of SUV, a semi-quantitative analytical method. In this research, we measure the variation of SUV through the correction of the influence of contrast media and compare the differences. As we revise the SUV which is increasing in the image with attenuation correction by using contrast media, we can expect anatomical images of high-resolution. Furthermore, it is considered that through this trusted semi-quantitative method, it will definitely enhance the diagnostic value.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.197-218
• /
• 2019

In addition to economic growth and national income increase, China is also experiencing rapid growth in consumption of cosmetics. About 67% of the total trade volume of Chinese cosmetics is made by e-commerce and especially K-Beauty products, which are Korean cosmetics are very popular. According to previous studies, 80% of consumer goods such as cosmetics are affected by the word of mouth information, searching the product information before purchase. Mostly, consumers acquire information related to cosmetics through comments made by other consumers on SNS such as SINA Weibo and Wechat, and recently they also use information about beauty related video channels. Most of the previous online word-of-mouth researches were mainly focused on media itself such as Facebook, Twitter, and blogs. However, the informational characteristics and the expression forms are also diverse. Typical types are text, picture, and video. This study focused on these types. We analyze the unstructured data of SINA Weibo, the SNS representative platform of China, and Meipai, the video platform, and analyze the impact of K-Beauty brand sales by dividing online word-of-mouth information with quantity and direction information. We analyzed about 330,000 data from Meipai, and 110,000 data from SINA Weibo and analyzed the basic properties of cosmetics. As a result of analysis, the amount of online word-of-mouth information has a positive effect on the sales of cosmetics irrespective of the type of media. However, the online videos showed higher impacts than the pictures and texts. Therefore, it is more effective for companies to carry out advertising and promotional activities in parallel with the existing SNS as well as video related information. It is understood that it is important to generate the frequency of exposure irrespective of media type. The positiveness of the video media was significant but the positiveness of the picture and text media was not significant. Due to the nature of information types, the amount of information in video media is more than that in text-oriented media, and video-related channels are emerging all over the world. In particular, China has made a number of video platforms in recent years and has enjoyed popularity among teenagers and thirties. As a result, existing SNS users are being dispersed to video media. We also analyzed the effect of online type of information on the online cosmetics sales by dividing the product type of cosmetics into basic cosmetics and color cosmetics. As a result, basic cosmetics had a positive effect on the sales according to the number of online videos and it was affected by the negative information of the videos. In the case of basic cosmetics, effects or characteristics do not appear immediately like color cosmetics, so information such as changes after use is often transmitted over a period of time. Therefore, it is important for companies to move more quickly to issues generated from video media. Color cosmetics are largely influenced by negative oral statements and sensitive to picture and text-oriented media. Information such as picture and text has the advantage and disadvantage that the process of making it can be made easier than video. Therefore, complaints and opinions are generally expressed in SNS quickly and immediately. Finally, we analyzed how product diversity affects sales according to online word of mouth information type. As a result of the analysis, it can be confirmed that when a variety of products are introduced in a video channel, they have a positive effect on online cosmetics sales. The significance of this study in the theoretical aspect is that, as in the previous studies, online sales have basically proved that K-Beauty cosmetics are also influenced by word-of-mouth. However this study focused on media types and both media have a positive impact on sales, as in previous studies, but it has been proven that video is more informative and influencing than text, depending on media abundance. In addition, according to the existing research on information direction, it is said that the negative influence has more influence, but in the basic study, the correlation is not significant, but the effect of negation in the case of color cosmetics is large. In the case of temporal fashion products such as color cosmetics, fast oral effect is influenced. In practical terms, it is expected that it will be helpful to use advertising strategies on the sales and advertising strategy of K-Beauty cosmetics in China by distinguishing basic and color cosmetics. In addition, it can be said that it recognized the importance of a video advertising strategy such as YouTube and one-person media. The results of this study can be used as basic data for analyzing the big data in understanding the Chinese cosmetics market and establishing appropriate strategies and marketing utilization of related companies.

• Journal of Technology Innovation
• /
• v.14 no.1
• /
• pp.31-66
• /
• 2006

The country with a relative abundance of human capital conducts relatively more R&D in the steady state than its partner. This country acquires the know-how to produce a relatively wider range of innovative goods. High technology comprises a large share of the national economy in the human-capital rich country and real output growth is faster. This prediction would seem to accord weakly with empirical observation of Korean economy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.294-300
• /
• 2010

Purpose: The template-guided implant surgery offers several advantages over the traditional approach. The purpose of this study was to evaluate the accuracy of coordinate synchronization procedure with 5-axis milling machine for surgical template fabrication by means of reverse engineering through universal CAD software. Materials and methods: The study was performed on ten edentulous models with imbedded gutta percha stoppings which were hidden under silicon gingival form. The platform for synchordination was formed on the bottom side of models and these casts were imaged in Cone beam CT. Vectors of stoppings were extracted and transferred to those of planned implant on virtual planning software. Depth of milling process was set to the level of one half of stoppings and the coordinate of the data was synchronized to the model image. Synchronization of milling coordinate was done by the conversion process for the platform for the synchordination located on the bottom of the model. The models were fixed on the synchordination plate of 5-axis milling machine and drilling was done as the planned vector and depth based on the synchronized data with twist drill of the same diameter as GP stopping. For the 3D rendering and image merging, the impression tray was set on the conbeam CT and pre- and post- CT acquiring was done with the model fixed on the impression body. The accuracy analysis was done with Solidworks (Dassault systems, Concord, USA) by measuring vector of stopping’s top and bottom centers of experimental model through merging and reverse engineering the planned and post-drilling CT image. Correlations among the parameters were tested by means of Pearson correlation coefficient and calculated with SPSS (release 14.0, SPSS Inc. Chicago, USA) ($\alpha$ = 0.05). Results: Due to the declination, GP remnant on upper half of stoppings was observed for every drilled bores. The deviation between planned image and drilled bore that was reverse engineered was 0.31 (0.15 - 0.42) mm at the entrance, 0.36 (0.24 - 0.51) mm at the apex, and angular deviation was 1.62 (0.54 - 2.27)$^{\circ}$. There was positive correlation between the deviation at the entrance and that at the apex (Pearson Correlation Coefficient = 0.904, P = .013). Conclusion: The coordinate synchronization 5-axis milling procedure has adequate accuracy for the production of the guided surgical template.