• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.693-695
• /
• 2015

현재 전자식 전력량계는 전국기준 45%로써 2020년까지 모든 기계식 전력량계를 전자식 전력량계로 교체하고 있다. 전자식 전력량계는 계량데이터를 LP(Load Profile) 형태로 메모리에 저장하여 보관하고 있으며 저장된 LP는 잔자식 전력량계에 모뎀을 통해 한전 서버로 보내지거나 현장에서 노트북을 연결하여 유선으로 취득하고 있다. 기존 기계식 전력량계에서 얻지 못했던 무효전력, 피크전력, 역률, 주파수 등 다양한 정보를 얻을 수 있으나 전자식 전력량계 제조사에 따라 운영프로그램이 틀리고, 전자식 계기에서 노트북으로 LP를 전송시 사용하는 컨버터가 전력량계 형태에 따라 달라 현장업무시 불편한 점이 발생한다. 그리고 유선으로 취득함에 따른 현장업무 불편과 안전사고의 우려가 있다. 따라서 효율적으로 계량데이터를 취득하기 위해서는 운영프로그램, 노트북 연결장치를 일원화하고 통신선이 없이 취득하는 방법으로의 개선이 필요하다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.303-311
• /
• 2010

There have been various forms of systems such as a digital speedometer or a black box etc. to meet the social requirement for reducing traffic accidents and safe driving. However that systems are based on after-accident vehicle data, there is limit to prevent the accident before. So in our previous research, by storing, analyzing the Vehicle-dynamic information coming from driver's behavior, we are developing the decision-device which could provide driver with Alerting-Information in real-time to enhance the driver's safety drive. but the performance valuation is not yet executed. Finally, this study developed positional recognition system by using the DGPS for pre-developed risky driving decision device. The result of test analyzed with the same that the aggregated vehicle dynamics data in DGPS and dangerous risky driving decision device. If the performance of risky driving decision device is verified by precisely positional recognition system, the risky driving management of vehicle would be effected.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.266-266
• /
• 2009

This paper describes important parameters used to evaluate the insulation performance of power supply components in metro substations. For online fault diagnosis of power supply components, we have developed a new remote condition monitoring system using wireless technology. Our developed system can continuously monitor electric power equipment such as transformers, circuit brakers, and rectifiers and have powerful wireless networking functions.

• 기계와재료
• /
• v.22 no.1
• /
• pp.46-53
• /
• 2010

공작기계에서 가공정밀도를 저하시키는 가장 큰 요인은 열변형 및 채터진동이다. 본 고에서는 이 중 장시간 가공중 기계의 열변형에 따른 문제점을 자동으로 공작기계 CNC(Computerized Numerical Controller) 제어기상에서 실시간으로 보상하여 주는 장치 및 기술개발 사례에 대한 내용을 언급하고자 한다. 기계가공에서 온도신호의 실시간 데이터 취득 및 열변형에 따른 공작기계 원점(Work Offset)의 자율보정이 가공정밀도 향상 및 가동률 향상에 많은 영향을 끼친다 이에 따라 본 고에서는 온도 데이터의 취득부와 보상을 위한 보정값 추출을 위한 선형회귀법 및 신경회로망의 보정모델을 임베디드화한 디바이스와 CNC상에서 가공중 공작기계 원점 자동보정을 하는 시스템을 개발하였기에 관련내용을 소개하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.372-378
• /
• 2016

The purpose of this study is to develop a system configuration for gathering data and building a database for agriculture. Some foreign agriculture-related companies have already constructed such a database for scientific agriculture. The hardware of this system is composed of automatic capturing equipment based on aerial photography using a UAV. The software is composed of parts for stitching images, matching GPS data with captured images, and building a database of collected weather information, farm operation data, and aerial images. We suggest a method for building the database, which can include information about the amount of agricultural products, weather, farm operation, and agricultural land images. The images of this system are about 5 times better than satellite images. Factors such as farm working and environmental factors can be basic data for analyzing the full impact of agriculture land. This system is expected to contribute to the scientific analysis of Korea's agriculture.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.208-211
• /
• 2006

본 논문에서는 3상 유도전동기의 고장진단을 수행하기 위해 패턴인식에 기반을 둔 진단 알고리즘을 제안한다. 실험 장치는 유도전동기 구동의 고장신호를 얻기 위하여 구축하였으며, 취득된 데이터를 이용하여 진단 알고리즘을 구축하였다. 취득된 데이터 중에서 진단을 위해 사용될 훈련데이터는 퍼지 기반 클러스터링 기법을 이용하여 신뢰성 높은 데이터를 선택하여 고장별 신호를 추출하였다. 진단 알고리즘으로는 데이터를 주성분 분석기법을 적용하였으며, 최종 분류를 위해 Euclidean 기반 거리척도 기법을 이용하였다. 다양한 부하 및 고장신호에 대하여 제안된 방법을 적용하여 타당성을 검증하였다.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.521-526
• /
• 2014

The purpose of this study is to propose the efficient method of 3D data registration. Three-dimensional data including the two-dimensional image acquisition apparatus and the position information are acquired at an arbitrary angle with each other. This paper proposes the more accurate and faster matching method by using this information. Four image points founded from 2D images match the volumetric size of the model and compute the homography of the axis for registration between two 3D data sets. The advantages of the proposed algorithm are the repeating process is unnecessary and the process time is faster than prvious method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.39-40
• /
• 2009

본 논문에서는 유헬스 시스템에 가장 기본이 되는 생체정보 측정에 대하여 하나의 휴대용 인터페이스만을 가지고 다양한 생체정보 측정기와 연계하여 다양한 생체정보를 취득할 수 있도록 하는 이식성 있는 임베디드 미들웨어 PSI(Portable Sensor Interface)를 제안한다. PSI는 U-health 서비스를 제공하기 위해 측정기 자동인식, 데이터 취득, 위험요소 표시 및 데이터 수집장치(DAS)와의 통신을 담당하는 기능을 갖는다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.549-557
• /
• 2022

Due to harsh conditions of construction site, understanding of current feature of terrain and other infrastructures is critical issue for site managers. However, because of difficulties in acquiring the geographical information of the construction sites such as large sites and limited capability of construction workers, comprehensive site investigation of current feature of construction site is not an easy task for construction managers. To address these circumstances of construction sites, this study deduce difficulties and applicabilities of unmanned aerial vehicle in the area of construction site management. To confirm applicability of UAV in civil construction project, case study have been conducted on the road construction project. The result of case study proved that the developed system is one of promising technologies that has been studied in construction site management. To improve applicability of UAV for construction and process management information, law and technical issues will be an important area of future study.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.4
• /
• pp.51-58
• /
• 2003

Satellite-based positioning system such as global positioning system(GPS) has played a major role in data capture technology for constructing GIS database. Recent advances in satellite-based positioning technology have made the task of precisely locating features fast, easy, and inexpensive, and determined their current latitude and longitude. However, there are still situations where satellite-based positioning service will not provide users with desired precision such as in urban environments, that is, the only severe handicap still hampering satellite-based positioning is the well-known problem of restricted satellite visibilities. As the majority of the creation and updating of road and street network are carried out in urban environments, the obstruction problem considerably impedes the wider application of satellite-based positioning. This paper presents the current GPS-based positioning environment for GIS data acquisition in urban areas. A field experiment with measurement vehicle has been performed under varying operational conditions and areas where shading of satellite signal is encountered due to buildings and overpasses with measurement vehicle in order to evaluate the availability of existing GPS-based positioning. We found that the current GPS-base positioning system we used in this study was insufficient for a precise GIS data acquisition. This research would make a contribution for the development of base data to supplementary technology, which can complement the existing GPS-based positioning.