• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.84-84
• /
• 2011

터널화재의 위험요소에 대한 해석을 위해서는 실제 상황을 재현한 실대형 실험이 가장 유용하겠지만 현실적으로 시간적, 공간적, 경제적인 제약이 따르기 때문에 CFD Modeling 기술의 이용 및 검증이 필요하고, 실제 상황에 가까운 현상의 재현을 위해서는 시뮬레이션의 정확도에 대한 향상이 필수적이다. 또한, CFD Modeling을 터널화재에 적용할 때 시뮬레이션의 질에 영향을 미칠 수 있는 요소들에 대한 결정이 선행되어야 한다. 우선, 터널의 기하학적 구조와 경계조건의 확립이 필요한데 필요한 정보를 얻기 위해서 어느정도 길이의 터널이 적절한지에 대해 생각할 필요가 있으며, 단면변화에 대한 결정을 통해 모델링을 수행하여야 한다. 모델링 작업이 선행된 후에 화재의 위치, 성장률, 최대 크기, 환기시스템 사항 등의 고려가 필요한데 이러한 조건들은 CFD Modeling의 결과에 직접적인 영향을 주기 때문에 충분한 사전조사가 이루어져야 하고, 각 사항들의 변수를 고려하여 다양한 화재시나리오의 도출이 가능할 수 있다. 마지막으로, 화재에서 발생된 열중 약 30%가 복사에 의해 주위 벽으로 전달될 수 있고 열은 연기가 가득찬 영역내에서 재분배될 수 있는데, 열전달 및 연기의 유동 등에 관한 자료를 기초로 화재현상에 대한 분석이 가능하다. 이러한 과정들을 통해 실제 상황에 가까운 설계화재 시나리오를 예측할 수 있다. 본 연구에서는 우리나라 최장대터널인 죽령터널에 대해 합리적인 가정을 통한 설계화재 시나리오를 기초로 화재시뮬레이션은 FDS(Fire Dynamics Simulator) 프로그램을 사용하여 화재 및 연기의 이동 양상을 분석하고, 피난시뮬레이션은 SIMULEX 프로그램을 사용하여 피난시간을 예측 함으로써 터널화재의 CFD Modeling에 의한 피난안전성을 검토하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.93-100
• /
• 2008

There are two ways of conventional thermal distortion analysis. One is the thermal elasto-plastic analysis and the other is the equivalent forces method based on inherent strain. The former needs exorbitant analysis time, while the latter cannot obtain results of stress field and it needs much time consumption with loads modeling on curved plates. Such faults in two methods have made difficulties in thermal distortion analysis of a large structure like ship hull. In order to solve them, new kind of thermal distortion analysis method was developed. We devised that the inherent strains was used as direct input factors in forms of boundary conditions. It was embodied by using thermal expansion coefficient in commercial code. We used the pre-calculated inherent strain as thermal expansion coefficient, and endowed nodes with imaginary temperatures. This method was already adopted at hull block welding distortion analysis which was considered as impossible, and gave productive results such as reduction of work time in the dry dock.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.5
• /
• pp.523-533
• /
• 2011

The demand for the circular hollow section (CHS) has been increasing due to its structural advantage in long-span structures and high-rise buildings. There are not enough researches on the CHS structure, though. The behavior of the gusset plate CHS joint, to predict the ultimate strength, is not easy to predict because the load deflection curve does not show consistency. Therefore, in this study, experiments and finite element analysis (FEA) were carried out to determine the ultimate strength according to the proposed ultimate deformation limit. Finally, a reasonable ultimate strength formula was proposed through comparisons with other design guides.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.35-44
• /
• 1997

A finite element computer program is developed for the specific analysis of earth retaining structures in urban excavation. Unlike the existing multi -purpose FEM programs, the newly developed program (EM) consists of very simple and easy data processing system for the urban excavation. A non-linear material model(GDHM, Generalized Decoupled Hyperbolic Models is deviloped and implemented in the program EM. The results of large scale model tests for earth retaining structures are used for the vertification of EM along whit GDHM, and the results were satisfactory, but it was found that the program EM needs minor modification for the improvement of its accuracy.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.89-94
• /
• 2004

Recently, the cityward tendency of the population has caused the construction of a high rise apartment increased, because it is possible for many people to dwell on a small ground area in an apartment. In the future the number of the constructed high-rise apartment units will also increase, because many people require a better environment and more improved space of their life. However, apartment buildings with many dwellers in spite of small area are exposed to great dangers, particularly fire. So the adaptable control methods of smoke which is the most dangerous to people in a fire were proposed by an analysis on some standards for the fire in this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2012

This study is a basic experimental research to apply FRP (Fiber Reinforced Polymer) box members to slabs and girders among various architectural structures, which receive bending stress. We prepared prefabricated FRP member and connected it to an FRP box member as a large cross section before we conducted an experiment in diverse conditions to analyze characteristics of compressive fracture behavior. In this study, we carried out a compressive fracture behavior test according to fillers on the upper part of the FRP box member, loading methods, and connective types and thereby performed a finite element analysis. The comparison of analysis results with test results revealed that rigidity was found to be slightly low, while stress was concentrated on the fracture point of the sample.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.804-807
• /
• 2008

Recently, with the increase of high rise and huge scale building construction, the use of high strength concrete has been increasing. High strength concrete has dense pore structure, which is susceptible to be damaged due to fire attack. For this, many researchers provide proper fire endurance method. In this paper, to provide the priority for selecting fire endurance method in high strength concrete execution, AHP technique is applied based on expert questionnaire. Fire endurance performance efficiency and ordinary performance efficiency was selected for level 1. Fire endurance performance efficiency had larger weight than ordinary one.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.453-458
• /
• 2009

정보화가 기업 경쟁력의 핵심 요소로 부각되고 있으며 기업 및 정부기관은 앞 다투어 정보화에 투자하고 있는 상황이다. 정보시스템 개발 프로젝트도 이제는 대형 프로젝트 수가 급증하고 있다. 최근 소프트웨어 CMMi 수준에 관한 인증 여부는 기업 경쟁력의 핵심적인 요인으로 그 중요성이 날로 강조되고 있다. 또한 PMI의 PMBOK는 프로젝트 관리의 바이블 격으로 업종 업태를 불문하고 광범위하게 적용되고 있는 상황이다. 프로젝트 관리자의 관점에서 볼 경우 CMMi 모델과 PMBOK 모델간의 중첩되는 부분, CMMi 프로세스를 실적용 시 관리영역에 대한 혼선 부분, 또한 PMBOK 상위지침의 구체성 미흡 부분에 대한 통합 및 조정이 필요하게 되었다. 현재 상용되는 개발방법론에는 관리적인 요소가 매우 미약하고, 국내에 아직까지 체계적으로 정립된 관리방법론이 없는 상황이다. 따라서, 본 논문에서는 프로젝트 관리자가 숙지해야 하는 프로젝트 관리영역, 프로젝트 관리단계, 제반 절차, 유관 정보시스템과의 연동(Interface) 등을 정보화 개발 프로젝트 생명주기(Life Cycle)에 맞춰 재구성 및 통합하여 프로젝트 관리자(Project Manager)에게 일관된 관점(Single Point of View)을 제시하여 프로젝트 생산성을 제고 하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.139-152
• /
• 1999

These days we broadly apply drilled shafts for deep foundations to build infrastructures. The defects of the deep foundations cause the decrease of their support load capacity and the increase of settlement, and the subsequent damage of the super-structures. In consequence, non-destructive testings techniques of concrete piles are important for their integrity evaluation. To improve understanding and reliable application of the impact echo method for the integrity evaluation of the drilled concrete piles, numerical studies of the impact response of concrete piles by using axi-symmetric three-dimensional finite element method are peformed for (a) sound piles: (b) piles containing necks, voids and layers of low-quality concrete: and (c) piles in soil and/or above rock. The results of these studies show that the finite element method is effective for evaluating the impact response of drilled concrete piles.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.185-193
• /
• 1997

A major problem of frequency analysis in the field of low-frequencies such as building or construction vibration is the way of signal processing which is appropriate to obtain included frequency content from the finite process to be measured. Therefore, it is the aim of the investigation reported herein to develop the signal processing algorithm which is analyzed without losing the reliability of the measurements in low-frequency domain. To accomplish the research objective, it was analyzed the problems on the way of signal processing in low-frequency domain, and compared the response characteristics of FFT with those of MEM (Maximum Entropy Method) about the low-frequency of vibration. This evaluation of the response characteristics is used in determining appropriate signal processing algorithm into the low-frequency domain.