• 한국대기환경학회지
• /
• 제16권3호
• /
• pp.285-291
• /
• 2000

EGR(Exhaust Gas Recirculation) is known as the technique reducing the NOx emissions from diesel engine. Low pressure roote and high pressure roote are applied for heavy-duty diesel engine are. In this study, as research for the heavy duty diesel engine equipped with EGR, reduction characteristic of CO, THC, NOx, and PM in HD diesel engines are investigated by applying EGR device. Also, through the experiments using 11 liters, turbocharged diesel engine with EGR valve and intercooler, exhaust gas reduction characteristics were measured as changing in EGR rate according to D-13 mode.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.114-117
• /
• 2005

Air cleaners in all of the automotive engines have been used for decades. In the early 1920's the oil bath type was the popular shape of air cleaners. The air cleaners of the oil wetted bath type were introduced in 1940's. The shape of the dry pleated paper type media was introduced in the 1950's. This trend still continues with new and innovative media being introduced. Engine air cleaners should have effectively removed and reduced harmful contaminants being ingested into engines. This studies show that both, the ingested contaminant size and concentration need to be controlled. This paper com pare and analyze the characteristics over the economics, engine performances and reduction of noises of power-plus air filters with wet paper which were sticked to heavy duty diesel engine.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.59-64
• /
• 2002

The effects of EGR on emissions were investigated by using a six-cylinder, 8 litre, turbo-charged, heavy-duty diesel engine with a low pressure route EGR system. The experiments were performed at various engine loads while the EGR rates were set from 0% to 30%. Hot and cooled EGR are achieved without cooling and with cooling respectively. To verify the possibility of EGR technology for the applications, test were performed with steady state test cycle. It was found that the exhaust emissions with the EGR system resulted in a very large reduction in oxides of nitrogen at the expense of higher smoke and PM emissions. Increasing the EGR rate leads to deteriorating specific fuel consumption and power at lower speed and higher load. Also, the reduction rates of NOx emissions for hot and cooled EGR are similar.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.37-42
• /
• 2003

This research was carried on an 8100cc turbo-charged heavy duty diesel in the application of a cooled-EGR. Exhaust and intake manifold were modified and an electronically controlled EGR was installed in order to investigate engine performance and exhausted emission characteristics. High pressure route was designed in the compact form on the purpose of practicability in this cooled-EGR system, which constitutes a venturi tube to maintain pressure difference between exhaust manifold and compressor, an EGR cooler, an EGR valve and a solenoid valve.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권3호
• /
• pp.143-150
• /
• 2009

선박의 주기관이나 발전기관 등 디젤기관에서 사용하는 연료유는 원유를 정제해서 사용하고 있다. 석유화학공업에서 원유로부터 양질의 고급 휘발유를 많이 생산하기 위하여 촉매를 사용하는 유동접촉분해(FCC) 방법을 채택하여 원유를 분리하고 있다. 유동접촉분해 시 촉매의 주성분은 Si와 Al이며, 그 외에 Fe, Zn, Ti 등의 기본금속과 알칼리 금속 및 Ce, Nd, Ni, V 등의 희유금속이 함유되어 있다. 만일 선박에 사용되는 연료유에 이러한 성분의 촉매가 많이 혼입되어 Al, Si, Ni, V이나 Fe 등의 성분이 과다하게 되면 기관 부속품 마모가 아주 심하게 되고, 기관전체를 사용하지 못하게 되어 대형 해양 선박사고가 발생 할 수 있다. 다시 말해, 이런 성분이 많이 함유된 연료유를 기관에 사용하는 경우 연료펌프, 연료분사밸브, 실린더라이너, 피스톤링의 마모가 심하게 발생하게 된다. 따라서 이러한 사고를 예방하기 위하여 사고 발생현황에 대한 정확한 원인을 규명하고 밝히는 것이 중요하다. 아울러 그 사고의 원인이 자연적인 마모, 경년변화인가 또는 외적인 요인에 의한 사고인가에 따라 보험 보상 대상여부가 판명될 수 있어, 연료유로 인한 사고 원인규명은 아주 중요한 업무이다. 본 논문에서는 연료유 관련 사고가 발생한 선박을 대상으로 사고유형, 사고원인 및 예방법에 대한 검토를 하고 향후 선박의 디젤엔진에서 저질연료유 사용에 따른 문제점을 개선하도록 제시하고자 한다.

• 청정기술
• /
• 제22권4호
• /
• pp.211-224
• /
• 2016

가솔린 자동차의 내연기관 배기가스 처리를 위한 촉매로 삼원촉매가 널리 사용되고 있다. 반면 디젤 자동차의 배출 오염 물질 처리를 위해서는 다양한 기술들이 연구개발되고 있다. 디젤 자동차의 특징인 희박연소 조건에서 발생하는 질소산화물의 저감과 제거를 위해 티타니아에 담지된 바나듐 촉매가 상용화되어 있다. 바나듐 촉매를 이용한 질소산화물 저감기술은 암모니아를 환원제로 이용함으로써 대형 디젤 차량에 효과적으로 적용할 수 있다. 최근 활발하게 연구개발이 이루어지고 있는 구리가 이온 교환된 제올라이트 촉매는 초고연비 자동차 개발의 필수 기술로 인식되고 있다. 본 총설에서는 디젤 엔진의 배기가스 중 질소산화물을 효과적으로 제거하기 위한 후처리 기술 중 하나인 암모니아를 이용한 선택적 촉매 환원 반응의 촉매로 사용되는 구리가 이온 교환된 제올라이트 촉매와 관련한 최근 연구개발 동향을 소개하고자 한다.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.52-57
• /
• 2005

The increasing automobiles continue to cause air-pollution problem s worse than ever. In fact, many automobile research are involved in how to reduce exhaust emissions effectively specially in $NO_X$ and PM to comply with stringent emission standards, Euro V. This research emphasized on the development of continuous regeneration DPF technology which was one of promising removing technology of particulate matters because of its comparability and high applicability. In addition, this research discussed on some design points of view through correlation study by com paring the experimental data with computational results by the introduction of commercial codes such as CFD-ACE+ and KIVA-3V. The numerical simulation on the performance of continuous regeneration DPF apparatus and corresponding emission characteristics has been predicted well enough and verified with experimental results. The pressure and average temperatures are decreased to about 2.6% and 1.4% respectively under a full engine load condition mainly due to back pressures raised by diesel particulate filter. Pressure, temperature and heat releasing rates tend to decrease specially at higher engine load, but they are not affected at lower engine load regions.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.585-592
• /
• 2005

Nowadays it has been strongly required to control emissions from vehicles specially in diesel engines because of increasing number of vehicle in korea. This research aims to provide with some of deterioration factors on vehicles for emissions characteristics and the test was done on an electronically controlled heavy-duty diesel engine under severe driving conditions such as 1200 driving hours, 220,000 km driving distance and a full load. Under various driving conditions, CO, HC, $NO_{x}$, PM and Soots emissions were estimated under D-13 mode and D-3 mode respectively. CO emission was not changed until 500 running hours, and as engine aging is progressed THC was not changed until 500 running hours but it decreased to about $33\%,\;NO_{x}$ decreased constantly but on the other hand PM increased up to $6.9\%$ during the aging process.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.19-25
• /
• 2008

Selective Catalytic Reduction is effective in the reduction of NOx emission. This research focused to evaluate the performance of a urea-SCR system and was conducted in two procedures. One is SCR reactor test using model gas in order to provide an optimal injection condition itself. In this step, some parametric study on emission temperature, space velocity, aspect ratio and the formation of urea spray were made by using flow visualization and Computation Fluid Dynamics techniques. The basic simulation results contributed in determining the layout for an actual engine test. The other is an engine performance and emission test. The urea injector was placed at the opposite direction of exhaust gases emitted into an exhaust duct and an optimal amount of a reducing agent is estimated accurately under different engine loads and speeds. Furthermore, the variation of NOx emission and applied amount of urea was investigated in terms of modes under the condition of with and without SCR, and other emissions such as PM, CO and NMHC were evaluated quantitatively as well. This research may provide fundamental data for the practical use of urea-SCR in future.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.75-80
• /
• 2006

Since air pollution has become a globally critical issue and exhaust emissions from automobiles cause a major source of air pollution, many countries including advanced countries have stipulated stringent emission regulations. Particularly in diesel vehicles, NOx and particulate matters exhaust in significant amounts even though diesel vehicles provide merits in aspects of higher thermal efficiency and lower $CO_2$. To reduce Particulate matters and NOx, after-treatment technology such as filter trap, oxidation catalysts and EGR has been applied. This test was conducted on the effect of continuous regeneration diesel particulate filter and cooled-EGR, and 15ppm low sulfur diesel was used as a test fuel. Exhaust emissions, PM, NOx, CO, HC and Soots were measured and compared under D-13 and D-3 modes.