• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.377-383
• /
• 2021

In this paper, we describe the case of automatic test equipment development for hardware verification of stores management computer mounted on aircraft. Recently, the required functions of aircraft have been diversified and the related technologies of avionics equipment have developed, and the types and quantity of interfaces required for avionics equipment have increased. In addition to the existing old stores, the stores management computer also needs to control the interface in large quantities as the requirements for the new stores are added. For this reason, the time and manpower required for the inspection of avionic equipment are also increasing, and if the test process of avionic equipment can be automated and unmanned, more efficient inspection system operation will be possible. Therefore, this paper introduces the case of designing test software and test scenario to automate the structural design contents and verification process of test equipment required for the verification of hardware function of stores management computer.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.491-499
• /
• 2020

There are policies that foster the drone industry, which either put a legal precedent on drones through the "Drone Act" or grant a delay or exemption in applying the safety measures of "the Aviation Safety Act". Yet, the definition of a drone is unclear, requiring further discussion on commercial usage. Therefore, we have studied cases domestically and abroad, and also analyzed issues with the current aviation legislation. It was found that a drone is defined as "an unmanned aircraft where a pilot is not on board, and its net weight is 150 kg or less". However, there are several issues, such as that a drone taxi requires a pilot on board, and its weight is 150 kg or more. Thus, we propose to define a drone as "an unmanned aerial vehicle (provided, that its own net weight should be 300 kg or under, or not be limited to weight) under Article 2 (3) of the "Aviation Security Act" as prescribed by Ordinance of the Ministry of Land, Infrastructure, and Transport, which operates either by remote, automatically, or autonomously; or an unmanned aircraft under Article 2 (6) of the "Aviation Security Act".

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.37-43
• /
• 2024

National aircraft are subject to exceptions under the International Civil Aviation Convention. Each country must ensure the safety of civil aircraft through reasonable consideration (due regard). Accordingly, the Aviation Safety Act of Korea also includes an exception for national aircraft. However, Korea Coast Guard aircraft are legislated to be subject to the law on five provisions. As Korea Coast Guard aircraft operate under the application of these provisions of international and domestic laws, they will be required to control flight procedures from China's civil air traffic control when flying over provisional action zone, which is international waters in the West Sea. China's demand is a major limiting factor in protecting the safety of the people of Korea, which is the original mission of Korea Coast Guard aircraft, and through this study, countermeasures to solving these problems at the national level were suggested.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.699-709
• /
• 2023

As the global air traffic volume has shown a rapid increase, doubling every 15 years since 1977, domestic and international air traffic control services and air navigation safety facility operation management system and status review It is necessary to present the feasibility of establishing an air traffic control agency with integrated functions and establish an operating system for an independent dedicated agency to provide advanced air traffic control services in preparation for the future air transport environment. In particular, in 2021, the national ATM reformation and enhancement (NARAE) a customized comprehensive plan for operations, facilities, and systems to handle air traffic safely and efficiently by actively reflecting changes in the navigation environment such as international policies and standards as this is established, the role of the air traffic control agency becomes more important, and an improved action plan for the control and navigation operating system must be promoted.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.31-64
• /
• 2015

The Chicago Convention and Annexes have become the basis of aviation safety regulations for every contracting state. Generally, aviation safety regulations refer to the SARPs provided in the Annexes of the Chicago Convention. In order to properly reflect international aviation safety regulations, constant studies of the aviation fields are of paramount importance. Treaties duly concluded and promulgated under the Constitution and the generally recognized rules of international law shall have the same effect as the domestic laws of the Republic of Korea. Each contracting state to the Chicago Convention should meet ICAO SARPs about AOC and FAOC. According to ICAO SARPs, Civil Aviation Authorities shall issue AOC to air carriers of the state, but don't require to issue for foreign air carrier. However some contracting states of the Chicago Convention issue FAOC and/or Operations Specifications for the foreign operators. This FAOC is being expanded from USA to the other contracting states. Foreign operators have doubly burden to implement AOC of the ICAO SARPs because FAOC is an additional requirement other than that prescribed by the ICAO SARPs In Article 33, the Chicago Convention stipulates that each contracting state shall recognize the validity of the certificates of airworthiness and licenses issued by other contracting states as long as they are equal to or above the minimum standards of the ICAO. In ICAO Annex 6, each contracting state shall recognize as valid an air operator certificate issued by another contracting state, provided that the requirements under which the certificate was issued are at least equal to the applicable Standards specified in this Annex. States shall establish a programme with procedures for the surveillance of operations in their territory by a foreign operator and for taking appropriate action when necessary to preserve safety. Consequently, it is submitted that the unilateral action of the states issuing the FAOC to the foreign air carriers of other states is against the Convention. Hence, I make some proposals on the FAOC as an example of comprehensive problem solving after comparative study with ICAO SARPs and the contracting state's regulations. Some issues must be improved and I have made amendment proposals to meet ICAO SARPs and to strengthen aviation development. Operators should be approved by FAOC at most 190 if all states require FAOC. Hence, it is highly recommended to eliminate the FAOC or reduce the restrictions it imposes. In certain compliance-related issues, delayed process shall not be permitted to flight operations. In addition, it is necessary for the ICAO to provide more unified and standardized guidelines in order to avoid confusion or bias regarding the arbitrary expansion of the FAOC. For all the issue mentioned above, I have studied the ICAO SARPs and some state's regulation regarding FAOC, and suggested some proposals on the FAOC as an example of comprehensive problem solving. I hope that this paper is 1) to help understanding about the international issue, 2) to help the improvement of korean aviation regulations, 3) to help compliance with international standards and to contribute to the promotion of aviation safety, in addition.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.55-67
• /
• 2012

Real-time image georeferencing is required to generate spatial information rapidly from the image sequences acquired by multi-sensor systems. To complement the performance of position/attitude sensors and process in real-time, we should employ on-line aerial triangulation based on a sequential estimation algorithm. In this study, we thus attempt to derive an efficient on-line aerial triangulation algorithm for real-time georeferencing of image sequences. We implemented on-line aerial triangulation using the existing Given transformation update algorithm, and a new inverse normal matrix update algorithm based on observation classification, respectively. To compare the performance of two algorithms in terms of the accuracy and processing time, we applied these algorithms to simulated airborne multi-sensory data. The experimental results indicate that the inverse normal matrix update algorithm shows 40 % higher accuracy in the estimated ground point coordinates and eight times faster processing speed comparing to the Given transformation update algorithm. Therefore, the inverse normal matrix update algorithm is more appropriate for the real-time image georeferencing.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.270-278
• /
• 2008

This study : An analysis of position accuracy of topography according to using LiDAR data, aerial photo and digital map for a study area was conducted. The study area was selected in Hadan area, Sahagu, Busan aerial LiDAR data and aerial photo in the scales of 1:20,000, which are high tech surveying ways were used. The final digital orthoimage according to orientation process for each image and image resampling was producted. Using it, a checkpoint was chosen, information about the checkpoints selected was extracted, a coordinate of Horizontal Position through the screen digitizing was also extracted. Both the coordinates of LiDAR data and aerial photo using digital map in the scales of 1:20,000 announced to the public from NGII(National Geographic Information Institute) were gradually compared and analyzed. Based on the digital map, as a result of being both compared and analyzed, it has shown to us that horizontal position of aerial photo is more accurate than that of aerial LiDAR surveying (RMSE-building x:24cm, y:26cm).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.299-304
• /
• 2010

Depending on the progress of the surveying and information processing technology, the rapidly developing field of spatial information and the 3D real world spatial information for a variety of content on the computer was able to easily access. In this research, to study on the spot or to use aerial photographs to measure trees of the acquired data, calculate the trees height, forest area and capacity, determine the distribution of the density of acquired points in the forest and analyze accurate and objective information was acquired. The United States, Canada and so on through the capacity of trees biomass, forest resource analysis, time series monitoring, wildfire behavior modeling and applied research and has been declared. During worldwide is increasing interest in forest resources. In nationally, extensive research and analysis of the forest consists of the correct management and protection of forest resources to be effective.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.3-18
• /
• 2013

This study develops a forecasting method to estimate air cargo demand from ICN(Incheon International Airport) to all airports in EU with Seasonal Autoregressive Integrated Moving Average (SARIMA) Model using volumes from the first quarter of 2000 to the fourth quarter of 2009. This paper shows the superiority of SARIMA Model by comparing the forecasting accuracy of SARIMA with that of other ARIMA (Autoregressive Integrated Moving Average) models. Given that very few papers and researches focuses on air route, this paper will be helpful to researchers concerned with air cargo.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.137-145
• /
• 2014

The paper is to investigates how influence service quality satisfaction, trust and repurchase intention using SERVPERF instrument in airline industry. This study will contributes to provide development strategies how to expense market and strength relation between customer to FSC and LCC by an empirical study. This study uses computer software of SPSS 20.0 and AMOS 20.0 for study analysis. The LCC should strengthen the price competitiveness, as well as it needs to establish a strategic management distinguishing service quality from other airline. The airline will has improved service quality of reliability and tangibles since improve service of reliability and tangibles. This study will provide strategic insights and information on service quality in airline industry.