• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.3
• /
• pp.335-344
• /
• 2022

This study was conducted for 4 weeks on the preparation of the science teaching/learning course plan for 109 students in 4 classes of the 2nd year intensive course at B University of Education. Pre-service elementary teachers attended a two-week field training practice after listening to a lecture on how to write a science teaching and learning course plan. Pre-service elementary teachers tried to find out about the selection of materials and the degree of connection between the course plan and the class to prepare the science teaching/learning course plan. The researcher completed the questionnaire by reviewing and deliberation on the questionnaire questions together with 4 pre-service elementary teachers. The questionnaire related to the writing of the science teaching and learning course plan consists of 8 questions. Preferred reference materials when writing the course plan, the level of interest in learning, the success or failure of the science course plan and class, the science preferred model, the evaluation method in unit time, and the science teaching and learning One's own efforts to write the course plan, the contents of this course are the science faculty. It is composed of the preparation of the learning process plan and how helpful it is to the class. The results of this study are as follows. First, it was found that elementary school pre-service elementary teachers preferred teacher guidance the most when drafting science teaching and learning curriculum plans. Second, it is recognized that the development stage is very important in the teaching and learning stage of the science department. Third, Pre-service elementary teachers believe that the science and teaching and learning process plan has a high correlation with the success of the class. Fourth, it was said that the student's level, the teacher's ability, and the appropriate lesson plan had the most influence on the class. Fifth, it was found that pre-service elementary teachers prefer the inquiry learning class model. Sixth, it was found that reports and activity papers were preferred for evaluation in 40-minute classes. Seventh, it was stated that the teaching and learning process plan is highly related to the class, so it will be studied and studied diligently. Eighth, the method of writing a science teaching and learning course plan based on the instructional design principle is interpreted as very beneficial.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.

• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.875-889
• /
• 2021

This study compares and analyzes the Soil and Water Assessment Tool (SWAT) and Terra MODIS (Moderate Resolution Imaging Spectroradiometer) as coniferous, deciduous and mixed forest with Yongdam Dam upstream (904.4 km²). The hydrologic evaluation period was set to 10 years from 2010 to 2019, and the applicability of the 8-day MOD15A2 Leaf Area Index (LAI) data, 3 TDR (Time Domain Reflectometry) (GB, JC, CC), and 1 Flux Tower (DU) evaporation volume (YDD) data was simulated. As a result, the R² of coniferous forest, deciduous forest and mixed forest are 0.95, 0.89, 0.90, soil moisture and evaportranspiration stations R² were analyzed at 0.50 to 0.55 and 0.51, respectively, with R² at 0.74, RMSE 2.75 mm/day, NSE 0.70 and PBIAS 14.3% for Yongdam inflow. Based on the calibrated and validated watersheds, the annual average evaportranspiration was calculated as coniferous 469.7 mm, deciduous 501. mm and 511.5 mm mixed forest, total runoff were estimated at coniferous 909.8 mm, deciduous 860.6 mm and 864.2 mm mixed forest. In the case of annual average evaportranspiration, it was evaluated that deciduous were high, but in the case of streamflow, it was evaluated that coniferous were high. Unlike other hydrologic with similar patterns throughout the year, the average annual evapotranspiration was about 7% higher than coniferous due to the higher evapotranspiration of deciduous with high leaf area index in summer and fall. In addition, deciduous were 9% and 6% higher for surface runoff and lateral flow, but the groundwater of coniferous was 77% higher. Therefore, it was confirmed that the total runoff was in order of coniferous, mixed forest, and deciduous.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.3
• /
• pp.360-372
• /
• 2023

The aim of this study was to identify the current state of pediatric dentists, evaluate the adequacy of pediatric dentist supply and demand, and find out the perception of all pediatric dentists on the current state of pediatric dentists and policy establishment. An Online survey was conducted among pediatric dentists. The questionnaire was subdivided into 'general characteristics', 'number of dental treatments and working days per year', 'proportion of covered services', 'perceptions of supply and demand of pediatric dentists'. Through the Korean Academy of Pediatric Dentistry, the Health Insurance Review and Assessment Services, the National Health Insurance Service (NHIS), and the Korean Statistical Information Service, the current state of pediatric dentists, the number of claims for covered services, and the decrease in births per year were investigated. Dental clinics claiming to be pediatric dentistry reached half of all medical institutions, but only 3.78% of pediatric dentists actually worked. 61.36% of all pediatric dentists were concentrated in the metropolitan area, showing a national imbalance. Although the population of children and adolescents have continuously decreased over the past 20 years, the number of NHIS-covered services has shown a continuous increase. Over the past 10 years, the optimal supply of pediatric dentists has been maintained at around 4,000. According to the analysis, 92.15% of pediatric dentists thought that it was necessary to prepare policies and support measures at the government level. This study is expected to be used as basic data for establishing a demand estimation method for pediatric dentistry specialists in the future.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.541-549
• /
• 2023

The aim of this study wasto conduct a quantitative analysis of CT image quality according to an algorithm designed to reduce metal artifacts induced by metal components. Ten baseline images were obtained with the standard filtered back-projection algorithm using spectral detector-based CT and CT ACR 464 phantom, and ten images were also obtained on the identical phantom with the standard filtered back-projection algorithm after inducing metal artifacts. After applying the to raw data from images with metal artifacts, ten additional images for each were obtained by applying the virtual monoenergetic algorithm. Regions of interest were set for polyethylene, bone, acrylic, air, and water located in the CT ACR 464 phantom module 1 to conduct compare the Hounsfield units for each algorithm. The algorithms were individually analyzed using root mean square error, mean absolute error, signal-to-noise ratio, peak signal-to-noise ratio, and structural similarity index to assess the overall image quality. When the Hounsfield units of each algorithm were compared, a significant difference was found between the images with different algorithms (p < .05), and large changes were observed in images using the virtual monoenergetic algorithm in all regions of interest except acrylic. Image quality analysis indices revealed that images with the metal artifact reduction algorithm had the highest resolution, but the structural similarity index was highest for images with the metal artifact reduction algorithm followed by an additional virtual monoenergetic algorithm. In terms of CT images, the metal artifact reduction algorithm was shown to be more effective than the monoenergetic algorithm at reducing metal artifacts, but to obtain quality CT images, it will be important to ascertain the advantages and differences in image qualities of the algorithms, and to apply them effectively.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.118-130
• /
• 2005

This study was conducted to evaluate the spent composts of selenium-enriched mushrooms as a feed selenium Source. Total selenium (Se) contents and Se profiles in the spent mushroom composts (SMC) were determined. In addtion, we also investigated the metabolism in relation to Se accumulation in the mushroom. Mushrooms used in this study were Flammulina velutipes and Se enriched mushrooms were grown for 60 days by adding 2 mg of inorganic Se (Na₂SeO₃) per kg of mushroom composts (MC) on as-fed basis and it was compared with mushrooms not to add Se to the MC. Total Se contents for Se-treated mushrooms were significantly increased (P<0.0001) by 20-fold (4.51 ㎍/g of dry) compared to Se-untreated (0.23 ㎍/g of dry). On the contrary, organic Se proportion was significantly lower (P<0.0001) in the Se-treated mushroom (72.3%) than Se-untreated (100%, not analytically detected of inorganic Se). Se distribution upon a length in the Se-treated mushrooms was the highest in the bottom part (6.86 ㎍/g of dry) near to MC, and top and middle parts were significantly lower (3.71 and 3.01 ㎍/g of dry, respectively) than the bottom (P<0.001). In the SMC from Se-treated mushrooms, a high concentration of Se (5.04 ㎍/g of dry) was still remained, but that from Se-untreated mushrooms was significantly low (P<0.0001) as 0.08 ㎍/g of dry. Se-treated SMC showed a high rate of organic Se (65.67%), suggesting that most of inorganic Se in the SMC was converted to organic Se by mushroom mycelia, and Se-untreated SMC showed 100% of organic Se, not being detected of inorganic Se. Prior to mycelia inoculation in the mushroom culture, the sterilization of MC brought approximately 18% of Se loss in the MC. This result is in accordance with facts generally known that Se is weak in the high temperature and it is consequently volatilized under that condition. Apparent and net accumulation rates (%) for Se into mushrooms were 14.81 and 10.14%, respectively and their difference (4.67%) is considered that it is due to the volatilization into the air via metabolic process of mushroom itself. From the result of this study, inorganic Se addition to MC for mushroom improved the Se content in the mushroom and SMC from Se-enriched mushrooms contained a high concentration of Se. Mycelium and fruiting body from mushrooms converted inorganic Se in MC to organic Se, indicating a high proportion of organic Se in the mushroom and SMC. Therefore, Se in Se-enriched mushroom and SMC was recognized as Se sources of food for human as well as feed for livestock.

• Korean Journal of Plant Resources
• /
• v.36 no.4
• /
• pp.413-434
• /
• 2023

Sesame (Sesamum indicum L.) is an ancient oilseed crop, which is usually cultivated for its seeds. Sesame breeding aims to achieve high seed yield and quality, along with resistance to biotic or abiotic stresses. It is estimated that sesame is originated from Asia or Africa continent. In this study, we characterized 10 agronomic traits and evaluated lignan contents in 165 sesame germplasm originated from Asia or Africa, to select high-yield or high-lignan content accessions. Sesame germplasm showed diverse phenotypes and highly variable lignan contents (sesamin: 0.5-12.6 mg/g, sesamolin: 0.1-3.5 mg/g, lignan: 1.1-16.1 mg/g). Based on originated continent, there are significant difference in agronomic traits, but no in lignan content. Correlation analysis revealed that yield-related agronomic traits were negatively related with lignan contents. Also, PCA analysis showed that most agronomic traits and lignan contents were principal components explaining diversity of whole sesame germplasm. Sesame germplasm was clustered into three groups based on agronomic traits and lignan contents. Finally, we selected high-yield (IT29416, IT167042, K276848, K276849) and high-lignan candidate accessions (IT169254, IT170031, IT169250, IT154876, IT170034), respectively. These accessions are expected to be valuable resources for breeding of high-yield and high-lignan contents functional cultivars.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.57-70
• /
• 2009

Considerable advance has been made on research on effect of steel pipe Umbrella Arch Method (UAM) and mechanical reinforcement mechanism through numerical analyses and experiments. Due to long analysis time of three-dimensional analysis and its complexity, un-quantitative two-dimensional analysis is dominantly used in the design and application, where equivalent material properties of UAM reinforced area and ground are used, For this reason, development of reasonable, theoretical, quantitative and easy to use design and analysis method is required. In this study, both field UAM tests and laboratory tests were performed in the residual soil to highly weathered rock; field tests to observe the range of reinforcement, and laboratory tests to investigate the change of material properties between prior to and after UAM reinforcement. It has been observed that the increase in material property of neighboring ground is negligible, and that only stiffness of steel pipe and cement column formed inside the steel pipe and the gap between steel pipe and borehole contributes to ground reinforcement. Based on these results and concept of Convergence Confinement Method (CCM), two dimensional axisymmetric analyses have been performed to obtain the longitudinal displacement profile (LDP) corresponding to arching effect of tunnel face, UAM effect and effect of supports. In addition, modified load distribution method in two dimensional plane-strain analysis has been suggested, in which effect of UAM is transformed to internal pressure and modified load distribution ratios are suggested. Comparison between the modified method and conventional method shows that larger displacement occur in the conventional method than that in the modified method although it may be different depending on ground condition, depth and size of tunnel, types of steel pipe and initial stress state. Consequently, it can be concluded that the effect of UAM as a beam in a longitudinal direction is not considered properly in the conventional method.

• 한국노년학
• /
• v.31 no.1
• /
• pp.129-141
• /
• 2011

This study aims to find out effects of a tailored occupational activity program(TOAP) on the activities of daily living(ADL), cognitive function, depressive mood, and caregiver burden, who live in the community. Method : From October 2009 to May 2010, the TOAP was applied to 15 dementia patients and 15 of their caregivers, who was visitors of the Y-city Center for Managing Dementia in Gyunggi-do. The TOAP was designed for habituating patients and caregivers to the techniques acquired through goal activities and task and making it capable of being routinized regularly. The TOAP was applied to dementia patients and their cvaregivers twice a week for 7 weeks(one-time home visit, one-time phone inspection), a total of 14 times. Results: Significant differences among pre-test and post-test were found in the AMPS motor skills(1.10±1.14 and 1.34±1.2 respectively) scores, AMPS process skills(0.32±0.55 and 0.77±0.66 respectively) scores, ACL(3.86±0.65 and 4.17±0.64 respectively) scores, MMSE-KC(17.33±4.6 and 19.33±4.97 respectively) scores, GDS(11.73±6.87 and 8.53±7.09 respectively) scores, and caregiver burden(31.80±20.06 and 26.13±18.07 respectively) scores(p<0.05). A significant effect was confirmed from the TOAP which ADL, cognitive function, reduced patient's depression and caregiver burden(p<0.05). Conclusion: From the above results that a TOAP has an effect on the improvement of the ability to ADL, cognitive function and reduced depression and caregiver burden of dementia patients living in community. The present author hopes that, in the future, more diverse community based on tailored occupational activity programs will be developed to improve the functions of dementia patients living in community.

• Korean Journal of Culture and Social Issue
• /
• v.29 no.4
• /
• pp.537-567
• /
• 2023

This study compared the nature of disgust caused by the crime scene with that by the stereotype of the sexual-minority defendant, and compared the effect of each type of disgust on evidence evaluation and legal judgment. A total of 600 participants (300 men, average age of 44.40) were randomly assigned to sources of disgust (crime scene, sexual minorities defendant, control condition), the existence of additional evidence of innocence (o/x), and the existence of judicial directives (o/x). As a result of the study, disgust under the condition of a cruel crime scene with strong physical disgust was significantly higher than that of the sexual minority defendant, interpreted the evidence in a more guilty direction, and was more prone to_evaluate that the defendant was guilty. It is noteworthy that evidence evaluation was a significant moderating variable between disgust and probability of guilt under conditions where the source of disgust was a sexual minority, but not under control conditions and crime scene condition. It means that the effect of disgust on legal judgment may not be direct when the defendant is a sexual minority. In addition, the existence of the judicial instruction had a significant inverse effect on the sentence. And simple effect analysis found that presenting judicial instruction lowered probability of guilt only under the control condition. This makes it reasonable to infer that disgust derived from the characteristics of the crime scene and the defendant can be recognized as integral emotions that are difficult to correct with instructions. Finally, pity for the defendant was significantly higher under the conditions of sexual minority which shows that an emotional response of sympathy may occur in addition to disgust for sexual minorities. After examining the nature of disgust (physical & moral), legal judgment according to the source and degree of disgust was reviewed. In addition, the meaning of disgust and sympathy for the sexual minority defendant was discussed.