• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.567-575
• /
• 2021

In order to correct the provided RPC and DEM generated from the high-resolution satellite images, the acquisition of the ground control point (GCP) must be preceded. This task is a very complicate that requires field surveys, GPS surveying, and image coordinate reading corresponding to GCPs. In addition, since it is difficult to set up and measure a GCP in areas where access is difficult or impossible (tidal flats, polar regions, volcanic regions, etc.), an alternative method is needed. In this paper, we propose a 3D surface matching technique using only the established ground coordinate package, avoiding the ground-image-location survey of the GCP to correct the DEM produced from WorldView-2 satellite images and the provided RPCs. The location data of the public control points were obtained from the National Geographic Information Institute website, and the DEM was corrected by performing 3D surface matching with this package. The accuracy of 3-axis translation and rotation obtained by the matching was evaluated using pre-measured GPS checkpoints. As a result, it was possible to obtain results within 2 m in the plane location and 1 m in height.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.73-81
• /
• 2015

The objective of this study is in investigating the research for more accurately quantify the information on mountain forest by using the data on high density LiDAR. For the quantitative analysis of mountain forest resources, we investigated the method to acquire the data on high density LiDAR and extract mountain forest resources. Consequently, the height and girth of a tree each mountain forest resources could be extracted by using the data on high density LiDAR. When using the data on low density LiDAR of 2.5points/m² in average used to produce digital map, it was difficult to extract the exact height and girth of mountain forest resources. If using the data on high density LiDAR of 7points/m² by considering topography, the property of mountain forest resources, data capacity and process velocity, etc, it was found that multitudinous entities could be extracted. It was found that mountain topography and mixed topography were generally denser than plane topography and multitudinous mountain forest resources could be extracted. Furthermore, it was also found that the entity at the border could not be extracted, when each partition was individually processed and the area should be subdivided and extracted by considering the process time and property of target area rather than processing wide area at once. We expect to be studied more profoundly the absorption quantity of greenhouse gas later by using information on mountain forest resources in the future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.470-475
• /
• 1999

This study was conducted to evaluate the utilization of animal by-product mixture (ABPM) as a dietary animal protein source of fish meal replacer, and to determine the effect of dietary chromic oxide in growing rainbow trout, Oncorhynchus mykiss. ABPM is a mixture of five anmial by-products such as meat and bone meal (MBM) feather meal (FM), squid live, powder(SLP), poultry by-product (PBP) and blood- meal (BM) at a specific weight based ratio. Diet 1 and 2 were formulated on a isonitrogenous and a isocaloric basis of $46.5\%$ crude protein and 16.7 KJ/g diet; diet 1 (WFM 100), $100\%$ of the animal protein source came from white fish meal; diet 2 (ABPM 40), $60\%$ WFM+$40\%$ ABPM as the animal protein source; diet 3 (-Cr) commercial diet without chromic oxide; diet 4 (+Cr), commercial diet with chromic oxide. After eight weeks of feeding trials, fish fed diet 2 had a significantly lower body weight gain (WG) and feed efficiency (FE) than that of fish fed the other diets (P<0.05). When comparing diet 3 with diet 4, no significant differences were found in WG and FE (P>0.05). There were no significant differences on condition factor, hematocrit level, serum phosphorus, bone phosphorus, whole body phosphorus, and bone ash among fish from all four diet groups. Fish fed diet 4 had a significantly higher whole body lipid than that of fish fed the other diets (P<0.05), These results indicated that ABPM could be used less than $40\%$ in growing rainbow trout with a sufficient period of acclimation, In addition, the $0.5\%$ of chromic oxide can be used to determine the apparent digestibility of the nutrients in the feed without any adverse effects on growth and body composition.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.540-548
• /
• 2002

The purpose of this study is to analyze the application of oyster shells (OS) as aggregates for concrete. For this purpose, five reference mixes with W/C ratios of 0.4 ∼0.6 at intervals of 0.05 were used. The replacement proportion of OS was varied with ratios of 0, 10, 30, 50 and 100％ by volume of fine or coarse aggregate in the reference mixes. OS was washed and crushed for using as aggregates. New chemical reaction between crushed OS aggregate and cement paste was tested through XRD and SEM analysis. Two strength properties (compressive and flexural) were considered. Strength tests were carried out at the ages of 1, 3, 7, 14 and 28 days. The variations of workability, air content and density, drying shrinkage of the specimens with different proportions of OS were also studied. Finally, the hollow concrete block using OS as a substitute material for fine aggregate was made for testing the application of OS. Experimental results showed that my new chemical reaction did not occur due to mixing OS in concrete. The workability and strengths decreased with increase in proportion of OS. The same trend was observed in density and unit weight, but air content increased due to the inherent pores in OS, which showed a possibility to produce light weight concrete with low strength by using OS as coarse aggregates for concrete. Tests on hollow concrete block showed that the compressive strength and absorption ratio were satisfied with quality requirements when the fine aggregate was substituted with OS up to 50％ in volume.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.474-478
• /
• 2009

본 연구는 2008년 맞춤형 방문건강관리사업에 사용되고 있는 관절통증을 중심으로 한 사례관리를 수정 보안하여 우리나라 실정에 맞는 관절통증 사례관리 프로그램을 개발, 제안하며, 맞춤형 방문건강 관리사업의 활성화와 완성도를 높이는데 있다. 연구방법으로는 2007년 전국 12주 관절통증 사례관리 결과자료 분석하고, 전국 253개 보건소의 맞춤형 방문건강관리사업 인력에 대한 자료 분석과 전국 보건소 전문가 자문회의와 토론 결과를 통해 설문지를 수정 보완하여 2008년도 충청남도 관절통증 12주 사례관리를 실시하였다. 자료분석은 SPSS 12.0 통계 프로그램을 이용하여, p-value가 0.05 미만과 0.01미만인 경우를 통계적으로 유의한 것으로 판정하였으며, 전국자료는 빈도분석, wilcoxon 부호순위 검정과 McNemar's 검정을 실시하였으며, 12주의 관절통증 사례관리의 연구기간동안 수집된 자료를 1주와 8주간, 1주와 12주간, 8주와 12주간을 paired t-test 검정과 McNemar's 검정을 실시하여 유의성 평가를 실시하였다. 연구결과는 다음과 같다. 12주 기간 동안 사전 사례관리 방문간호사의 교육을 통한 사례관리 서비스의 강도의 조절 및 매주로 서비스의 횟수를 조절하여 사례관리를 실시한 결과 총 109개 항목에서 1주와 8주간에 유의한 항목은 TG(mg/dl)를 비롯한 51개 항목, 1주와 12주간에는 콜레스테롤(mg/dl)을 비롯한 53개 항목, 8주와 12주간에는 지난 48시간동안 관절통증 점수를 비롯한 3개 항목으로 유의한 차이를 볼 수 있었으며, 1주와 8주간은 유의하나 1주와 12주간은 유의하지 않게 나타나는 항목은 TG(mg/dl)를 비롯한 3개 항목, 1주와 8주간은 유의하지 않다가 1주와 12주간은 유의하게 나타나는 항목은 콜레스테롤(mg/dl)를 비롯한 6개 항목, 1주, 8주, 12주간의 모든 기간에서 유의한 항목은 지난 48 시간동안 관절통증 점수를 비롯한 3개 항목으로 조사되었다. 결론적으로 현재 우리나라에서 추진되고 있는 맞춤형 방문건강관리 사업의 사업지침에 대한 보완을 위해 관절통증사례관리 프로그램에 있어 중재 서비스 또는 프로그램의 기간은 12주간에서 8주간으로 조정 되어야 하며, 추가가 필요한 항목으로는 교육, 자기역량 강화, 운동처방, 물리치료, 약물치료, 대체요법, 식이, 영양, 생활지도 등이며, 어골도 분석을 위한 기본 틀 및 주요 구성요소를 제시 및 기여 요인 및 결정요인을 위한 논리적 모형 제시가 필요하며, 개선목표를 위한 유지증진 및 관리능력, 지기 관리 수행도 개선과 대상자별 맞춤형 사례관리를 위한 표준화된 행동 체크리스트 제작 보급 및 사례별 운동, 물리치료 지도 방법 계획 수립에 대한 인력 충원이 필요하다.

• Journal of the HCI Society of Korea
• /
• v.14 no.1
• /
• pp.23-33
• /
• 2019

Expectations for reunification have been higher than ever since the relationship between the two Koreas has become more flexible. However, since most of the integrated education in high school is based on teachers and textbooks, the educational effectiveness is minimal as it fails to attract learners' interest. Therefore, in this study, high school students participated in the North Korean market, the market for the rainy season, and our market. Through this development, the government proposed a new content for unification education that would raise interest in unification and effectively learn how the two Koreas can be divided. The main analyses and studies of this paper are as follows: :(1) First, the current state of unification education and understanding of North Korea and the current status of unification education was analyzed through the survey of educational materials for unification of North Korea, unification and school. (2) Based on the analyzed data, a learner-centered, participatory service concept was derived. (3) Based on the concept of service, a prototype of a unified education content based on the theme of a marketplaces. (4) Tested a prototype of the content of unification education for high school students. (5) Based on the prototyping test results and user analysis, a unified education content was improved and proposed. The study could replace and supplement traditional methods of unification education by improving the effectiveness of unification education through the provision of effective unification education services to high school students.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.161-172
• /
• 2014

An earth pressure balanced shield TBM with the diameter of 4.4 m was designed and manufactured for a subsea discharge tunnel excavation. Its cutterhead was designed to be optimized for the strongest rock mass condition in the tunnel alignment, and then the applicability of the refurbished shield TBM was validated for its maximum capacity. Especially, the maximum cutter penetration depth for the strongest rock mass condition should be kept to be below 7 mm/rev in order to satisfy the allowable capacities of the shield TBM. From the analysis of TBM advance data, approximately 95% of field data showed the cutter penetration depth below 7 mm/rev. In addition, it was certified that the acting forces of every disc cutter, TBM thrust and torque during TBM driving were within the allowable capacities of the shield TBM and its disc cutters. When real acting forces of the disc cutters in the field were compared with those predicted by the CSM model, they showed the close relationships with each other even though the predictions by the CSM model were approximately 22~25% higher than field data.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.195-209
• /
• 2018

In this study, the characteristics of various raw hairs used for traditional Korean brushes were examined; further, the characteristics and deterioration patterns of Korean, Chinese, and Japanese brushes were compared, with a quantitative evaluation to assess the brush performance. The tensile strength was generally found to be higher with a greater fiber thickness. Among the hairs examined, the back and flank hair of goat was more damaged than that in other parts, and the tensile strength was low. Higher elasticity of the brush made with hair of high cysteine content was measured. Owing to deterioration by use of the brushes, artificial drying brushes had a higher yellowness index and lower tensile strength than natural drying brushes. Further, it was confirmed that brushes with good absorbency exhibited good consistency, but not good elasticity. Thus, the performance of the brush can be influenced by the kind of material used and the brush usage pattern. In addition, it is possible to identify the material science characteristics of brushes which have been produced only by experience; therefore, the results of this study could provide basic data for manufacturing brushes employed in conservation treatment, in the future.

• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.19-22
• /
• 2005

Introduction: Daily Q.A is the important step which must be preceded in a radiation treatment. Specially, radiation output measurement and laser alignment, SSD indicator related to a patient set-up recurrence must be confirmed for a reasonable radiation treatment. Daily Q.A proceeds correctness and a prompt way, and needs an objective measurement basis. Manufacture of the device which can facilitate confirmation of output measurement and appliances check at one time was requested. Methods and Materials: Produced the phantom formal daily check device which can confirm a lot of appliances check (output measurement and laser alignment, field size, SSD indicator) with one time of set up at a time, and measurement observed a linear accelerator (4 machine) for four months and evaluated efficiency. Result: We were able to confirm an laser alignment, field size, SSD indicator check at the same time, and out put measurement was possible with the same set up, so daily Q.A time was reduced, and were able to confirm an objective basis about each item measurement. As a result of having measured for four months, output measurement within ${\pm}\;2\%$, and measured laser alignment, field size, SSD indicator in range within ${\pm}\;1mm$. Conclusion: We can enforce output measurement and appliances check conveniently and time was reduced and was able to raise efficiency of business. We were able to bring n cost reduction by substitution expensive commercialized equipment. Further It is necessary to makes a product as strong and slight materials, and improve convenience of use.

• Journal of The Korean Association For Science Education
• /
• v.40 no.6
• /
• pp.595-609
• /
• 2020

The purpose of this study is to analyze the experiences of teachers who participated in the development of online science class videos in the context of covid-19, their perception of online science class, and the characteristics of the online science class content developed by teachers. A survey and interviews were conducted with ten elementary school teachers who made online science class videos themselves. Also the characteristics of the online science class were investigated by analyzing the online science class video produced by the participants. As a result, participants in the study recognized the lack of production time, difficulty in filming and editing, concerns over misconceptions, the problem of solving copyrights for existing materials, and the burden of external disclosure. Although it was a teacher who had experience producing online science class video contents, no research participants actively answered the merits of online science class. On the other hand, the study participants cited that the shortcomings of online science classes were that students had fewer opportunities for inquiry and lack of communication or interaction. In particular, these shortcomings were thought to have a great influence on the quality of online science classes, especially in making inquiry classes difficult. Some teachers took a negative view that online science classes could not completely replace face-to-face classes. However, if multiple teachers are presented with supplementary teaching activities that complement the content-based online teaching method, the method of combining online science classes and face-to-face classes is not. Through the analysis of the contents of the online science class, the introduction and arrangement steps of the online science class were similar to the process of the face-to-face science class, but the inquiry step and the conceptual explanation step showed a big difference from the face-to-face science class.