• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.167-173
• /
• 2008

In this paper, the flexible narrow bandpass filters (BPFs) with ${\lambda}$g/4 short and ${\lambda}$g/2 open stubs by microstrip line on duroid substrate are suggested. These BPFs with narrow bandwidth show flexible bandwidth with variation of the position of the stubs using the Qe (external quality factor) without changing the impedance value at microwave range. On the other hand, by replacing the series quarter-wavelength connecting lines with the equivalent T-shaped line of bandstop filter(BSF), the compact stub bandpass filter with harmonics suppression can be realized. The BPF with ${\lambda}$g/4 short stubs shows the insertion loss of 2.1 dB and the return loss of 18 dB and BPF with ${\lambda}$g/2 open stubs shows the insertion loss of 1.2 dB and the return loss of 21.9 dB at the center frequency of 5.8 GHz and the bandwidth of 10 %.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.1
• /
• pp.18-26
• /
• 1975

In this paper, a frequency controlled bandwidth adjustable bandpass filter consisting of 4-path system is precented. It is shown that this system has characteristics similar to ihose of the magneticuly coupled double tuned amplifier and the center frequency of the passband is able to be shifted contineolisly. The adjustable range of the bartdwidth of the filter system is anslyzed for she case of the double and single tuned characteristics. The experiment has been conducted to verify the theory of this system and the experimental resulis are in good agreement with the theoretically calculated values.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.73-77
• /
• 2012

In this article, we designed a wide bandpass filter in order to apply microwave reflectometry for KSTAR. The proposed wide bandpass filter consists of a metamaterial structure which is to get a wide band, a lower insertion loss, and a high skirt. This is applied to VCO's output to enhance the linearity. A pass band is 18-28 GHz and the out of pass band is stopped over 20 dB. To confirm of the metamaterial, we suggest a dispersion diagram. The proposed filter in lower band and upper band of pass band is respectively a left handed and right handed characteristics. A group delay is below 0.5 ns.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.237-246
• /
• 1999

A miniaturized waveguide bandpass filter is designed by combining a corrugated lowpass structure and a highpass configuration based on the cut-off effect of waveguides. It is smaller than the conventional waveguide bandpass filter composed of half-wavelength resonators and has wider spurious free characteristics. Optimized design data for a seven-order waveguide bandpass filter with the symmetrical structure are given at the center frequency of 10 GHz with 800 MHz bandwidth. Measured bandwidth of the center frequency of 9.97 GHz is 840 MHz and measured insertion loss is 0.97dB, The length of the bandpass filter is 64.38mm. The first spurious response is produced at 26.1 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1315-1322
• /
• 1993

본 연구에서는 헤어핀 공진기를 이용하여 L대역 대역통과 MIC여파기를 설계하였다. 여파기의 크기를 줄이기 위해 헤어핀 공진기 간의 결합을 일반결합 대신에 안쪽견합 또는 혼합결합을 사용할 누 있다. 안쪽결합을 사용한 4개의 공진기로 된 여파기는 일반결합 여파기 보다 크기가 20~30% 감소되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.689-692
• /
• 2003

본 논문에서는 개방된 양 끝이 Loading 캐패시턴스로 연결된 새로운 행태의 1/2 파장 공진기를 이용해서 3단 대역통과 여파기를 설계, 제작하였다. 제안한 공진기의 전파지연효과(Slow-Wave Effect)때문에, 넓은 상향저지대역을 갖으며, 사이즈(Size)가 축소된 협대역 여파기 설계가 가능하다. 설계한 대역통과 여파기는 미세라인 구현이 가능한 후막 리소그라피 공정 기술을 이용하여 제작하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.84-90
• /
• 2011

In this paper, a dual-band pseudo-combline narrow bandpass filter is proposed. The proposed bandpass filter adopts the open resonant stubs and the proposed bandpass filter can be used for ITS(Intelligent Transport System) and X-band satellite systems application. The proposed bandpass filter has the insertion and return losses of 1.72 dB and 15.5 dB at the bandwidth of 3.6 % and center frequency of 5.8 GHz, respectively. Also, the second operating frequency band for insertion and return losses are 1.92 dB and 16.3 dB at the bandwidth of 3% and center frequency of 8.5 GHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.1-7
• /
• 2007

This paper proposes the design method based on the composite right/left-handed (CRLH) structure to miniaturize and enhance the rejection performance in the stopband. For realization, we used the 0-th order resonance point of the unbalanced case of the CRLH and the simple theory of Inverter. The proposed technique is validated by the performance predictions and experiments, and it is found out that the suggested method enables the sire reduction of over 65 % from the conventional filters such as the parallel coupled type.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.21-30
• /
• 1999

Several kinds of design method for the hairpin type band-pass filter have been reported. The conventional design methods have some restrictions in characteristic impedance of coupled line section, which provide complexities to designer. In this paper, the novel design formulas for the hairpin type band pass filter have been derived and proposed to resolve the problems of the reported design methods. By employing the equivalent circuit of the coupled line section and band pass filter design theory, the design procedures and formulas are derived. The hairpin type RX/TX band pass filters for the IMT-2000 service have been designed, fabricated with duplexer configuration, and then measured to show the validity of the proposed design method.