• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.25.5-26
• /
• 2009

인류의 활동 무대가 우주공간으로 확대됨으로써 우주기상에 의한 피해를 최소화 할 수 있는 조치가 요구됨에 따라 우주기상에 대한 감시 및 예 경보 업무가 필요해 졌다. 미국은 이미 우주기상 감시와 예보의 필요성을 인식하고 해양대기청(NOAA), 미 공군(USAF), 항공우주국(NASA), 내무부(DOI), 에너지부(DOE), 과학재단(NSF)이 연합하여 1996년 국가우주기상 프로그램(National Space Weather Program)을 수립.추진하고 있다. 특히 정부연구 기관인 NOAA 산하 우주기상예보센터(Space Weather Prediction Center; SWPC)와 미 공군 기상국(AFWA)은 우주기상 자료 생산, 수집, 자료 센터 운용, 연구 지원 및 예 경보 업무를 공동으로 수행하고 있으며 관련 자료 및 정보의 교환 등 매우 밀접하게 상호협력하고 있다. 최근 정부는 과학기술 7대 중점투자 분야별 중점육성후보기술로서 우주감시체계개발기술을 포함한 국가과학기술기본계획(577전략)을 수립 발표하였으며, 대한민국 공군은 향후 우주군 창설을 목표로 우주전력 기반체계구축을 계획하고 있다. 국방부는 2012년 전시작전통제권 환수에 대비한 독자적인 작전지휘능력 확보가 필요한 상황이며, 미래의 한국군 독자적 네트웍 중심 전장(NCW: Network Central Warfare) 체계 구축을 위해서는 미 공군의 "우주기상작전센터"와 같은 우주기상 예 경보 체계 구축이 요구된다. 이 연구에서는 군의 독자적 우주작전능력 확보를 위한 우주기상 예 경보 체계 구축 방향을 제시하고자 사전기반 연구를 수행하였다. 그 내용으로 우주기상에 대한 개요 및 우주기상의 변화에 따른 국내외 영향을 조사하고 국내외 우주기상 예 경보 시스템을 소개하고자 한다. 또한, 미공군의 우주기상 활용 상태를 점검하여 한국 공군을 위한 우주기상 예 경보 체계 구축 및 인력과 기술 확보에 대한 방안을 제시하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.104-104
• /
• 2016

음극아크증착과 스퍼터링을 동시에 사용한 하이브리드 공정으로 제조된 TiAlSiN 코팅층의 물성을 평가하였다. TiAlSiN 코팅층은 음극아크 소스에 Ti-Al 타겟을 장착하고 스퍼터링 소스에는 Si 타겟을 장착하여 아르곤과 질소 가스의 혼합가스 분위기에서 스테인리스(SUS304)와 초경(cemented carbide; WC-15wt.%Co) 기판 위에 제조되었다. 음극아크 소스에 인가되는 전류는 고정하고 스퍼터링 소스에 인가되는 전력을 조절하여 TiAlSiN 코팅층의 Si 함량을 제어하였다. TiAlSiN 코팅층의 Si 함량이 증가하면 코팅층의 구조가 주상정에서 비정질 구조로 변화한다. 이는 Si 함량이 증가하면 코팅층에 형성되는 알갱이 구조의 크기가 줄어들기 때문이다. X-선 회절 결과와 Scherrer's equation을 이용하여 Si 함량에 따른 알갱이 구조의 크기를 계산하면 Si이 없는 코팅층은 약 14 nm의 크기를 보이며 8 at.% 이상의 함량에서 약 2.5 nm로 포화된다. TiAlSiN 코팅층의 경도를 Si 함량에 따라 측정하면 Si 함량이 증가하면 경도도 증가하는 경향을 보이며 약 9 at.%의 Si 함량에서 3200 Hv로 최대가 되고 이후에는 감소한다. TiAlSiN이 코팅된 스테인리스 시편을 대기에서 열처리하고 시편 무게증가를 측정하여 코팅층의 내열성을 평가하였다. Si 함량이 증가하면 내열성도 향상되는데 14.4 at.%의 Si 함량에서 $700^{\circ}C$까지 무게 증가가 없으며 $900^{\circ}C$까지 0.43 mg의 증가를 보인다. 본 실험을 통해서 얻어진 TiAlSiN 코팅층은 비교적 높은 경도와 내열성을 확보하여 절상공구 보호막 코팅 소재 등으로 활용이 가능할 것으로 판단된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.79-88
• /
• 2020

This paper propose the method to drive a solar panel cleaning robot efficiently on an inclined panel using vacuum pad pressure. In this method, the rubber pads using the vacuum pressure are used to attach robot body to the panel surface. By applying the linkage mechanism to the vacuum pads, it was possible to reduce robot weight and power consumption and to prevent slipping of the robot. In addition, the use of solenoid valves, proximity sensors, and encoders to detect movement of the robot body and the control of the pad pressure dedicate to the driving of the robot on an inclined panel. In order to move the robot forward, the operation sequence of multiple solenoid valves was completed, and the six vacuum pads mounted to both legs were accurately controlled to form vacuum and atmospheric pressure in right order so that the robot could move forward without slipping. At last, it was confirmed through experiments that straight-forward moving and rotational movement could be performed up to 36 degrees of inclination angle of solar panel.

• Clean Technology
• /
• v.21 no.1
• /
• pp.33-38
• /
• 2015

In this research, life cycle inventory database (LCI DB) was developed for liquid CO₂ employing life cycle assessment (LCA) methodology. As are result of characterization and normalization process, production of liquid CO₂ puts on environmental impact in the order of resource depletion, global warming, acidification, eutrophication and photochemical oxidation, and among a wide variety of input, electricity contributes in most of the impact categories. Air emission plays a key role in the acidification and eutrophication while ammonia affects most on the ozone depletion. It is anticipated that development of liquid CO₂ LCI DB makes it possible for national environmental strategies to be more activated including environmental labeling scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.49-59
• /
• 2014

Recently, wireless sensor networks(WSNs) are widely used for intrusion detection and ecology, environment, atmosphere, industry, traffic, fire monitoring. In this paper, an energy efficient clustering algorithm is proposed. The proposed algorithm forms clusters uniformly by selecting cluster head that optimally located based on receiving power. Besides, proposed algorithm can induce uniform energy consumption regardless of location of nodes by multi-hop transmission and MST formation with limited maximum depth. Through the above, proposed algorithm elongates network life time, reduces energy consumption of nodes and induces fair energy consumption compared to conventional LEACH and HEED. The results of simulation show that the proposed clustering algorithm elongates network life time through fair energy consumption.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.90-97
• /
• 2010

The high efficiency power management IC(PMIC) with DTMOS(Dynamic Threshold voltage MOSFET) switching device and DTMOS Error Amplifier is presented in this paper. PMIC is controlled with PWM control method in order to have high power efficiency at high current level. Dynamic Threshold voltage CMOS(DT-CMOS) with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuits consist of a saw-tooth generator, a band-gap reference circuit, an DT-CMOS error amplifier and a comparator circuit as a block. the proposed DT-CMOS Error Amplifier has 72dB DC gain and 83.5deg phase margin. also Error Amplifier that use DTMOS more than CMOS showed power consumption decrease of about 30%. DC-DC converter, based on Voltage-mode PWM control circuits and low on-resistance switching device is achieved the high efficiency near 96% at 100mA output current. And DC-DC converter is designed with Low Drop Out regulator(LDO regulator) in stand-by mode which fewer than 1mA for high efficiency.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.82-89
• /
• 2010

In this paper, a buck-boost converter using three DTMOS(Dynamic Threshold Voltage MOSFET) switching devices is presented. The efficiency of the proposed converter is higher than that of conventional buck-boost converter. DTMOS with low on-resistance is designed to decrease conduction loss. The threshold voltage of DTMOS drops as the gate voltage increases, resulting in a much higher current handling capability than standard MOSFET. In order to improve the power efficiency at the high current level, the proposed converter is controlled with PWM(pulse width modulation) method. The converter has maximum output current 300mA, input voltage 3.3V, output voltage from 700mV to 12V, 1.2MHz oscillation frequency, and maximum efficiency 90%. Moreover, the LDO(low drop-out) is designed to increase the converting efficiency at the standby mode below 1mA.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2020

The use of NAND flash memory is continuously increased with the demand of mobile data in the IT industry environment. However, the erase operations in flash memory require longer latency and higher power consumption, resulting in the limited lifetime for each cell. Therefore, frequent write/erase operations reduce the performance and the lifetime of the flash memory. In order to solve this problem, management techniques for improving the performance of flash based storage by reducing write and erase operations of flash memory with using disk buffers have been studied. In this paper, we propose a CPWL to minimized the number of write operations. It is a disk buffer management that separates read and write pages according to the characteristics of the buffer memory access patterns. This technique increases the lifespan of the flash memory and decreases an energy consumption by reducing the number of writes by arranging pages according to the characteristics of buffer memory access mode of requested pages.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.129-136
• /
• 2018

The IEC 61850 communication standard is used worldwide, and within the country the new substation is built as a digital substation based on IEC 61850 from 2013, after field tests and R&D from 2007. Research on the development of digital substation operating system has been conducted mainly in large domestic companies, so the IED power application equipment for LCP are developed. However, there is still a lack of research in the field of systems that can accommodate all the field devices used for legacy substation and new digital substation. In this paper, we developed the 48VDC input modules and the 125VDC output modules which can construct proposed field information processing modules to IEC 61850 based type, and verified the field applicability from the state monitoring and control operation tests by using IEC 61850 client authentication program and Wireshark.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.326-333
• /
• 2008

In wireless sensor networks, a sensor node with in-network aggregation adjusts the timeout which is a waiting time to receive messages from child nodes. This paper proposes a novel timeout scheduling scheme for data aggregation in wireless sensor networks, which adaptively configures its timeout according to changing data patterns in order to improve energy efficiency and data accuracy during data aggregation. The proposed scheme decreases the timeout when the temporal difference of collected data(data variation) from children is lower than a pre-defined threshold because there is no occurrence of critical events. Conversely, it increases the timeout when the data variation is higher than the pre-defined threshold in order to fulfill more accurate data aggregation. Extensive simulation reveals that the proposed scheme outperforms the cascading-based scheme in terms of energy consumption and data accuracy.