• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.99-105
• /
• 2000

One dimensional magneto-photonic crystal having structure of (A/B)$^{k/W}$(B/A)$^{k}$ , where M is a magnetic layer of highly Bi-substituted iron garnet, A and B are dielectric layers of $SiO_2$ and T $a_2$O$_{5/}$, and k is the stacking number of the dielectric layers, has been numerically analyzed as a function of the thickness (d$_{M}$) of M (1∼535 nm) and the stacking numer of k (5∼15). The transmittance, Faraday rotation, and figure of merit of the magneto-photonic crystal have been investigated both in the visible and infrared wavelengths. A factor of several and several tens greater Faraday rotation and figure of merit have been obtained compared to the single layer of M, at many localized modes. In the visible the maximum figure of merit of 0.15 was obtained ( = 720 nm) when k = 11 and d$_{M}$ = 375 nm with T : 0.54, $\theta$$_{F}$ = 8.13$^{\circ}$, which was a factor of 30 greater than that of single garnet layer. Much greater maximum figure of merit, 0.285, was obtained in the infrared ( = 1114 nm) when k = 11 and d$_{M}$ = 800 nm with T = 0.66, $\theta$$_{F}$ = 18$^{\circ}$, which was a factor of 100 greater than that of single garnet layer.

• Tunnel and Underground Space
• /
• v.24 no.4
• /
• pp.255-274
• /
• 2014

The target of this study is large scale rock slope collapsed by around 7 pm on August, 2012, which is located at ${\bigcirc}{\bigcirc}$ limestone quarries of Gangneung city, Gangwondo. The slope prior to the collapse is formed as the height of about 200 m and the average inclination of $45^{\circ}$. The estimated amount of the collapse is about $1,500,000m^3$ with respect to the slope after the collapse. Geotechnical and field investigations such as boring, geophysical prospecting, surface geological survey, geological lineaments, borehole imaging, metric 3D imaging, experimental and field test, mining work by year, and daily rainfall were performed to find the cause of rock slope failure. Various analyzes using slope mass rating, stereonet projection, limit equilibrium method, continuum and non-continuum model were conducted to check of the stability of the slope. It is expected that the cause of slope failure from the results of various analysis and survey is due to the combined factors such as topography, rainfall, rock type and quality, discontinuities, geo-structural characteristics as the limestone cavity and fault zones, but the failure of slope in case of the analysis without the limestone cavity is not occurred. Safe factor of 0.66 was obtained from continuum analysis of the slope considering the limestone cavity, so the ultimate causes of slope failure is considered to be due to the influence of limestone cavity developed along fault zone.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.249-256
• /
• 2019

This paper presents an optimization framework of electrical impedance tomography for characterizing electrical conductivity profiles of concrete structures in two dimensions. The framework utilizes a partial-differential-equation(PDE)-constrained optimization approach that can obtain the spatial distribution of electrical conductivity using measured electrical potentials from several electrodes located on the boundary of the concrete domain. The forward problem is formulated based on a complete electrode model(CEM) for the electrical potential of a medium due to current input. The CEM consists of a Laplace equation for electrical potential and boundary conditions to represent the current inputs to the electrodes on the surface. To validate the forward solution, electrical potential calculated by the finite element method is compared with that obtained using TCAD software. The PDE-constrained optimization approach seeks the optimal values of electrical conductivity on the domain of investigation while minimizing the Lagrangian function. The Lagrangian consists of least-squares objective functional and regularization terms augmented by the weak imposition of the governing equation and boundary conditions via Lagrange multipliers. Enforcing the stationarity of the Lagrangian leads to the Karush-Kuhn-Tucker condition to obtain an optimal solution for electrical conductivity within the target medium. Numerical inversion results are reported showing the reconstruction of the electrical conductivity profile of a concrete specimen in two dimensions.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.345-360
• /
• 2002

This study was for analysing the sedimentary rock slope stability and providing the reinforcement method that can heighten stability. The study area consists of Cretaceous basalt or basaltic tuff belonging to Hak-Bong Basalt Formation in Ha-Yang Group. Nature of geological structure confirmed in this area ars bedding, joint and fault. Majority of geological structure that affect most relationship rock slope stability is bedding. It is shown that dip direction is 120~160/15~25. In other structure, joint sets are shown that dip direction of set 1 is 310~330/65~85 and set 2 is 230~250/70~85. Joint set 3 shows above 85$^{\circ}$ high angle on NE trend although do not show clear. Stability analysis about rock slope used kinematic analysis, limit equilibrium method and FLAC by numerical analysis method. FLAC is continuum model that use Fintie Defferentce Method, but could use Interfaces Module and get discrete model's analysis effect such as UDEC.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.268-268
• /
• 2022

지진해일은 발생빈도는 높지 않지만, 한 번 발생하게 되면 막대한 피해를 일으킬 수 있다. 우리나라에서는 1,900년대 4건의 지진해일이 기록되었으며, 이로 인해 동해안 및 남해안 등에 인명피해 및 재산피해가 발생하였다. 또한 2011년 동일본 지진해일로 인해 후쿠시마 원자력 발전소 변전설비가 침수됨에 따라 냉각수 공급이 중단되고 방화벽이 파괴되어 방사능이 누출되어 큰 피해로 연결되었다. 이러한 피해를 저감하기 위해 지진해일 수치해석과 확률론적 분석방법 등 다양한 방법을 활용한 연구가 국내외 적으로 활발히 수행되고 있다. 본 연구는 확률분포기반 지진해일고 예측모델 개발을 위해 수치해석을 수행하여 지진해일고(tsunami heights)를 산출하고 결과값에 대한 적절한 확률분포 분석을 실시하는 것이다. 지진해일고는 원자력발전소에서 취수구를 통한 냉각수 공급가능 여부를 판단하기 위해 최대 지진해일고(maximum tsunami height)와 최저 지진해일고(minimum tsunami height)로 구분하였다. 지진해일 수치해석은 지진원(단층매개변수) 조사, 조사된 지진원 중 지진해일 수치해석 case 선정을 위한 파향선추적기법(wave ray tracing) 수행, 선정된 지진원에 대해 로직트리(logic tree) 기법 적용, 로직트리를 적용한 지진원 case에 대한 수치해석 순서로 수행하였다. 수치해석을 통해 산출된 최대 및 최저 지진해일고 자료를 기반으로 확률분포형을 선정하기 위하여 확률분포별 적합성 평가를 실시하였다. 선정된 분포를 기준으로 처오름 및 처내림높이와 관련된 다양한 변수간의 의존관계를 파악하였다. 향후, 파악된 의존관계를 기반으로 예측모델을 개발하여 수치해석 결과와 연계함으로써 국내에 적용할 수 있는 확률론적 지진해일재해도를 제시할 수 있을 것으로 판단된다.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.39-52
• /
• 2014

Limestone caves that consist of main passages and branches are formed by a variety of processes, and have the characteristic of developing with a preferred orientation controlled by discontinuities such as bedding, joints, and faults around the cave. However, it is difficult to analyze a representative orientation from various orientations. To interpret the overall development orientation of limestone caves, this study proposes new development orientation analysis methods, termed the Average Span Ratio Method (ASRM) and the Individual Development Ratio Method (IDRM), using the weighting of persistence. Nine limestone caves in Korea were randomly selected for testing the new methods. The methods show a stronger development orientation for limestone caves than that obtained by traditional methods, which consider only the distribution of development orientations. Based on an analysis of the relationship between the average span and the dip angle of bedding, it is confirmed that shallowly dipping bedding is a major contributor to the expansion of span in limestone caves. In addition, using scan-line survey data acquired in the field, we perform an RMR analysis of stability of the ground around limestone caves.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.327-335
• /
• 2011

This study has two objectives: (1) to evaluate the degradation characteristics of symmetric unbraced steel frames by using analytical approach, and (2) to suggest equation which can approximately estimate the effect of degradation during the schematic design stage. For the analytical approach, the refined plastic hinge method with an arc length algorithm was adopted. The subject of analysis was one story one-bay, multistory one-bay, and multistory three-bay unbraced steel frames. The main parameters of the analytical approach include the stiffness ratio of column to beam and the axial force ratio. The study led to the following conclusions. The normalized stiffness of degradations is affected by both stiffness ratio of column to beam and the axial load ratio; however, the major influence on degradations is the axial force ratio. The equation, which can approximately estimate the effect of degradation, was suggested together with the research results.

• Composites Research
• /
• v.29 no.6
• /
• pp.321-327
• /
• 2016

In this study, tests and finite element analyses were performed regarding compression after impact strength for laminated composite structures of unidirectional carbon fiber reinforced plastic widely used in structural materials. Two lay-up sequences of composite laminates were selected as test specimens and four impact energy conditions were applied respectively. Impact and compressive strength tests were conducted in accordance with ASTM standards. Impact damages in test specimens were analyzed by using non-destructive inspection method of C-Scan, and compression after impact strengths were calculated with compressive test results. Progressive failure analysis method that can progressively simulate damages and fractures of fiber/matrix/lamina/laminate level was used for impact and compressive strength analyses. All analysis results including contact force, deflection, impact damages, compressive strengths, etc. were compared to test results, and the validity of analysis method was verified.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.93-100
• /
• 2009

A core procedure of the direct search method used in this study is optimizing a difference between objective function and real displacement and correcting unknown variables. Because the research procedure comes from back-analyzing of the unknown variable of each layer, back-analyzing results need an additional optimization to minimize interferential effects of unknown variables. Therefore, the direct search method Is used to obtain optimized solutions without a partial differentiation of an objective function. The object of this research is developing the back analysis technique for multi-unknown variables by modeling the soil including underground structure Into upper and lower layer. In order to minimize interferent errors, repeated back analysis is performed and applicability on the real tunnel is examined. Consequently, the multi-layer analysis model is more precise in describing the real behavior of underground structure. It shows the validity of back analysis far multi-layer model which is the understructure placed on multi-layer boundaries.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.1
• /
• pp.57-65
• /
• 2001

역사적 지진 발생 기록이 풍부하고 양산 단층 영향권 내에 있어 지진 발생 가능성이 높은 경주 지역을 대상으로 지진민감도 분석을 수행하였다. 지형적 특성을 고려한 지반조사와 현장 및 실내 시험을 통하여 대상 지역 지반의 지층 구성과 각 지층의 동적 특성을 분석 평가하고, 이를 토대로 한 지반 응답 해석을 수행하였다. 9개의 시험공을 시추하여 2개소의 크로스홀 시험과 7개소의 다운홀 시험을 실시하였고, 시추부지 포함 13개소에서 SASW 시험도 수행하였다. X선 회절 및 풍화도 분석과 공진주 시험 등의 실내시험도 병행하였다. 이러한 시험 결과를 바탕으로 El Centro 지진에 의한 지표면 최대 가속도를 등가 선형 부지응답해석을 통해 평가한 결과 붕괴방지 수준에서 0.158g~0.286g, 기능수행 수준에서 0.067g~0.116g의 분포를 보였고 퇴적층에 의하여 형성된 경주 시가지 분지 지형에서 증폭정도가 심하다는 것을 알 수 있었다. 해석 결과로 볼 때, 현행 건교부 기준 설계응답스펙트럼은 경우에 따라 지반 운동을 과소평가하고 지반 고유의 공진 현상을 고려하지 못하였다. 이러한 문제를 해결하기 위하여 개선된 지반 분류방법을 소개하였고 부지고유의 지반응답평가의 중요성에 대해 제시하였다.