DOI QR코드

DOI QR Code

Test and Finite Element Analysis on Compression after Impact Strength for Laminated Composite Structures of Unidirectional CFRP

일방향 탄소섬유강화 플라스틱 복합재 적층구조의 충격 후 압축강도 시험 및 유한요소해석

  • Received : 2016.10.31
  • Accepted : 2016.12.22
  • Published : 2016.12.31

Abstract

In this study, tests and finite element analyses were performed regarding compression after impact strength for laminated composite structures of unidirectional carbon fiber reinforced plastic widely used in structural materials. Two lay-up sequences of composite laminates were selected as test specimens and four impact energy conditions were applied respectively. Impact and compressive strength tests were conducted in accordance with ASTM standards. Impact damages in test specimens were analyzed by using non-destructive inspection method of C-Scan, and compression after impact strengths were calculated with compressive test results. Progressive failure analysis method that can progressively simulate damages and fractures of fiber/matrix/lamina/laminate level was used for impact and compressive strength analyses. All analysis results including contact force, deflection, impact damages, compressive strengths, etc. were compared to test results, and the validity of analysis method was verified.

본 연구에서는 구조재로 널리 사용되는 일방향 탄소섬유강화 플라스틱 복합재 적층구조의 충격 후 압축강도에 대한 시험 및 유한요소해석을 수행하였다. 연구에서 사용된 복합재 적층판은 적층방법에 따라 2종류로 구분되며, 각 적층판에는 4가지의 충격에너지를 적용하였다. 충격 및 압축강도 시험은 미국재료시험협회 규격을 준수하여 수행하였으며 비파괴검사 방법인 C-Scan을 통해 충격손상을 분석하고 압축시험을 통해 충격 후 압축강도를 산출하였다. 충격 및 압축강도 해석은 복합재 섬유/기지/단층/적층판 수준의 손상과 파손을 점진적으로 예측할 수 있는 점진적 파손해석을 사용하였다. 접촉하중, 처짐, 충격손상, 압축강도 등에 대한 시험 및 해석결과의 비교로부터 해석결과의 타당성을 확인하였다.

Keywords

References

  1. CMH-17, Composite Materials Handbook Volume 3: Polymer Matrix Composites Materials Usage, Design, and Analysis, SAE International, US, 2012.
  2. Ha, S.C., Kim, I.G., Lee, S.J., Cho, S.G., Jang, M.H., and Choi, I.H., "Probability Analysis for Impact Behavior of Composite Laminates Subjected to Low-Velocity Impact," Journal of the Korean Society for Composite Materials, Vol. 22, No. 6, 2009, pp. 18-22.
  3. Choi, I.H., "Low-Velocity Impact Response and Damage Analysis of Composite Laminates Under Initial In-Plane Loading," Journal of the Korean Society for Composite Materials, Vol. 22, No. 1, 2009, pp. 1-8.
  4. Park, H.B., and Kong, C.D., "Study on Impact Damage Behavior of Sandwich Composite Structure for Aircraft," Composites Research, Vol. 26, No. 1, 2013, pp. 36-41. https://doi.org/10.7234/kscm.2013.26.1.36
  5. Kong, C.D., Park, H.B., Lim, S.J., and Shin, C.J., "A Study on Compressive Strength of Carbon/epoxy Composite Structure Repaired with Bonded Patches after Impact Damage," Journal of the Korean Society for Composite Materials, Vol. 23, No. 5, 2010, pp. 15-21. https://doi.org/10.7234/kscm.2010.23.5.015
  6. Suh, Y.W., Woo, K.S., Choi, I.H., Kim, K.T., and Ahn, S.M., "Analysis of Low Velocity Impact Damage and Compressive Strength After Impact for Laminated Composites," Aerospace Technology, Vol. 10, No. 1, 2011, pp. 183-192.
  7. Ha, J.S., Kim, M.S., Joo, Y.S., and Cho C.M., "Analysis of Impact Damage and Compression after Impact Strength for Uni-Directional Carbon Fiber Composite Specimens," Proceeding of the Korean Society for Aeronautical and Space Sciences, Gangwon, Korea, Apr. 2014, pp. 312-315.
  8. Hongkarnjanakul, N., Bouvet, C., and Rivallant, S., "Validation of Low Velocity Impact Modelling on Different Stacking Sequences of CFRP Laminates and Influence of Fibre Failure," Composite Structures, Vol. 106, 2013, pp. 549-559. https://doi.org/10.1016/j.compstruct.2013.07.008
  9. Suemasu, H., Sasaki, W., Aoiki, Y., and Ishikawa, T., "Compressive Behavior of Impact Damaged Composite Laminates," Proceeding of the 16th International Conference on Composite Materials, Kyoto, Japan, July. 2007, pp. 1-8.
  10. Gonzalez, E.V., Maimi, P., Camanho, P.P., Turon, A., and Mayugo, J.A., "Simulation of Drop-Weight Impact and Compression After Impact Tests on Composite Laminates," Composite Structures, Vol. 94, No. 11, 2012, pp. 3364-3378. https://doi.org/10.1016/j.compstruct.2012.05.015
  11. ASTM D 7136, Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event, ASTM International, Pennsylvania, US, 2007.
  12. ASTM D 7137, Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matric Composite Plates, ASTM International, Pennsylvania, US, 2007.
  13. Genoa Theoretical Manual.
  14. Hinton, M.J., Kaddour, A.S., and Soden, P.D., Failure Criteria in Fibre Reinforced Polymer Composites: The World-wide Failure Exercise, Elsevier Science, UK, 2004.
  15. NASA-TM-83320, Simplified Composite Micromechanics Equations for Hygral, Thermal and Mechanical Properties, NASA, US, 1983.

Cited by

  1. Crack Band Model 기반 손상변수를 이용한 탄소섬유강화 복합재료 적층판의 점진적 파손 거동 예측 및 검증 vol.32, pp.5, 2016, https://doi.org/10.7234/composres.2019.32.5.258
  2. 인공신경망 기반 SMC 복합재료의 충돌 손상 해석을 위한 파라메터 획득 vol.34, pp.2, 2016, https://doi.org/10.7234/composres.2021.34.2.115