• Title/Summary/Keyword: 단일타격

Search Result 10, Processing Time 0.019 seconds

Rock Fragmentation Assessment of a Drill Bit by Hopkinson Bar Percussion Test (홉킨스바 타격시험을 통한 드릴비트의 암반파쇄 분석)

  • Kwon, Ki-Beom;Song, Chang-Heon;Park, Jin-Young;Shin, Dae-Young;Cho, Jung-Woo;Cho, Sang-Ho
    • Tunnel and Underground Space
    • /
    • v.23 no.1
    • /
    • pp.42-53
    • /
    • 2013
  • The percussion rate and spacing of the button of drill bit are very important in maximizing the drilling efficiency. Therefore, a series of percussion tests using Hopkinson bar system was carried out to assess the fragmentation performance against the beat rate and spacing of a drill bit. First, single percussion test complemented with numerical simulation was performed to analyze rock fragmentation phenomenon and to describe the fragmentation process. Next, multiple percussion test that repetitively strike the rock sample moving at predetermined rate was carried out to predict drilling efficiency against the button spacing. After the tests, the fragmented volume of the rock was measured by laser scanner and the drilling performance was analyzed using the calculated percussive energy and measured negative volume. Based on the results, the single impact performance of drill bit with 102 mm diameter was predicted.

피아노 망치의 타격위치 변화에 따른 단일음과 화음의 음색 분석

  • O, Sang-Jun;Kim, Jae-Hyeon;Jeong, Min
    • Proceeding of EDISON Challenge
    • /
    • 2016.03a
    • /
    • pp.381-383
    • /
    • 2016
  • 본 연구에서는 기존의 피아노와 다른 음색을 갖는 피아노를 기획하고자 하였다. 이를 위해서 피아노 현의 1/2지점, 1/3지점, 1/17지점을 타격했을 때의 배음의 구성을 EDISON의 pianostring 프로그램을 통해 분석하였다. 440Hz의 진동수를 갖는 A4음을 기음으로 하여 각 지점을 타격했을때의 음을 합성하였다. 또한 기음과 첫 두 배음으로 구성된 화음을 합성하였다. 음색을 분석하기 위해 설문조사를 통해 7개의 항목에 대해 평가하였다. 결과적으로 망치의 타격 지점을 변화시킴으로서 원하는 음색을 얻을 수 있을 것이라 기대한다. 일례로 1/2지점을 타격할 때 단일음과 화음의 음색 차이가 확연하게 드러나 효과적인 감정표현을 할 수 있을 것으로 예상된다.

  • PDF

항공기 낙뢰 간접영향 인증시험 동향

  • Han, Sang-Ho;Seo, Jang-Won
    • Current Industrial and Technological Trends in Aerospace
    • /
    • v.5 no.2
    • /
    • pp.87-97
    • /
    • 2007
  • 오늘날 항공기 설계와 제작은 다국적인 산업의 형태로 이루어지고 있다. 즉 항공기 서브시스템은 세계 각국에서 독립적으로 설계, 제작 및 시험한 후 한 곳으로 납품되어 조립 제작되는 데 이 때 중요한 것이 표준화이다. 항공전자장비의 낙뢰 간접영향에 대한 인증의 경우 RTCA DO-160E, Section 22 Lightning Induced Transient Susceptibility(낙뢰 유도 과도현상 적응성)로 표준화 되어 있다. 이 Section 22는 낙뢰 간접영향에 대한 항공전자장비 단위 즉, LRU (Line Replaceable Units)와 같은 부품단위의 시험 요건을 규정하고 있으며 이 규격은 현재 전 세계적으로 통용이 되고 있다. 1980년대 초 상용 수송기에 디지털 "Fly by Wire" 비행 시스템과 엔진제어시스템(EEC, Electronic Engine Control)의 도입 이후, 항공기 시스템이 낙뢰 환경에서 운용시 신뢰성을 보증할 필요성이 대두되었다. 데이터 처리를 통하여 제어되는 각종 항공전자장비에는 다중타격(MS)과 다중파열(MB) 기법에 의한 시험 사항이 최근 추가 되었다. 실제 낙뢰 환경과 유사한 시험실 모사를 위해 계속적인 연구가 진행 중이며 신규 시험 규격서가 새로이 출간되고 있다.

  • PDF

Suggestions for a New Method of Schmidt Hammer Blowing and Data Analysis on Rocks (I) (암석을 대상으로 시행하는 Schmidt Hammer 타격법의 새로운 제안 (I))

  • Min, Tuk-Ki;Moon, Jong-Kyu;Lee, Sang-Il
    • Tunnel and Underground Space
    • /
    • v.19 no.4
    • /
    • pp.328-338
    • /
    • 2009
  • Schmidt hammer test as an indirect method has so far been widely applied for determining the physical properties of intact rock, and many researchers have developed procedures for its use on rock cores, blocks and in field. Though many methods have developed upto date for indirect using, the almost were single blow which has many errors. The purpose of this study was to evaluate the established as for ASTM, ISRM, BSI, Poole & Farmer and Hucka method and to suggest a new optimum test method and statistical analysis on rocks. The finding has indicated that succeeding blow has served as an optimal to predict physical properties of rocks. To conduct the experiment, researchers have examined 150 rock blocks, which include igneous, metamorphic and sedimentary rocks in Korea nation wide.

Study on Korean Variable Message Format Construction for Battlefield Visualization (전장가시화를 위한 한국형 지상전술데이터링크 구축 연구)

  • Kim, Seung-Chun;Lee, Hyung-Keun
    • Journal of IKEEE
    • /
    • v.15 no.1
    • /
    • pp.104-112
    • /
    • 2011
  • During the ground operation of Korean army, the voice message is mainly used for exchanging informations related to the surveillance and reconnaissance, command and control, and precision strike. However, in order to the battlefield visualization among fighting powers participating in the ground force operation, automatic situational awareness and variable message format (VMF) for command and control are required. For securing core technologies necessary for the battlefield visualization, message standard and message handler are established through several applied researches. Besides, the VMF for equipping a weapon system is in development. In this paper, a study on the Korean variable message format (KVMF), where interoperability of integrated battle management system (BMS) is guaranteed due to performing joint, ground, and combined operations so that the situation awareness and strike system can be automated in almost real time, is presented. From the modeling and simulation (M&S) results of the message processor, delay time is varied in accordance with the number of nodes in unit platoon network, message length, and generation interval of routine messages. Therefore, it is shown that the system performance can be optimized by establishing proper network protocol for each situation.

Deviation of Heavy-Weight Floor Impact Sound Levels According to Measurement Positions (마이크로폰의 위치에 따른 중량 바닥충격음레벨의 편차)

  • Oh Yang-Ki;Joo Moon-Ki;Park Jong-Young;Kim Ha-Geun;Yang Kwan-Seop
    • The Journal of the Acoustical Society of Korea
    • /
    • v.25 no.2
    • /
    • pp.49-55
    • /
    • 2006
  • Measurement of impact sound insulation of floor, by current Korean Standard KS F 2810-2. is to be made with peak levels over 4 point in a receiving room. But it is often the case that there is inconsistency in results at various receiving points in the receiving room. Such variations obviously have effects on the repeatability and reproducibility of measured data. The result shows that there are even 10 dB deviations in 63Hz octave band frequency range and relatively less variations are occurred in other low frequency ranges. Such variations seems to be coming from modal overlaps of the receiving room. According to current rating method of floor impact sound. KS F 2863-2, that may affect on the single number latins scheme. From the result of tests in this study, there are 2dB to 6dB differences in the sin91e number with the combination of measurement points. This means that the reduction of measurement variations from the microphone positions is needed for a better credibility of measurement results.

A Review on The Korean Grooved Adze (유구석부 재검토)

  • Ro Hyuk-Jin
    • KOMUNHWA
    • /
    • no.57
    • /
    • pp.3-24
    • /
    • 2001
  • In terms of Typology, Korean Grooved Adzes are mainly grouped into two major types with some variations. Type 1 is characterized by such basic attributes as slant edge; trapezoidal groove; and rectangular or trapezoidal cross-section of a body. Whereas, T

  • PDF

Study on a Noble Methodology for the Automatic Decision of Optimal Launch Angle Sequence under Multi-Target Engagement (다수 표적 연속교전 상황에서의 최적 발사각 Sequence 결정 개념 연구)

  • Ryu, Sunmee
    • Journal of the Korea Society for Simulation
    • /
    • v.25 no.3
    • /
    • pp.133-146
    • /
    • 2016
  • To engage multiple missiles in single launcher against multiple targets, launcher system has to operate for optimized launch angle to each target sequentially. If the launch angle sequence is simply defined according to the target assignment order only, overall engagement time would be increased, and even in some engagement scenarios, it could be possible to miss some moving targets being out of proper engagement area. Therefore, the study on methodology for a real-time decision of optimized launch angle sequence is necessary. In this paper, the automatic decision model of launch angle sequence was suggested to minimize total engagement time by analyzing the simulation results of all engagement sequence set for multiple moving target scenario. Performance of proposed methodology for decision of optimal launch angle sequence was verified by comparing with the optimal or suboptimal sequence obtained from simulation results.

Gene Promoter Variation of Phosphoglycerate Kinase, a Glucose Metabolism Enzyme, is a Biomarker for Selection of Disease-resistant Sea Squirt, Halocynthia Roretzi (당 생합성 효소 PGK 유전자 프로모터 변이와 물렁증 저항성 멍게의 선별)

  • Cho, Hyun Kook;Hur, Young Baek;Cheong, Jae Hun
    • Journal of Life Science
    • /
    • v.23 no.2
    • /
    • pp.190-196
    • /
    • 2013
  • The sea squirt, Halocynthia roretzi, has experienced mass mortality due to softness syndrome. The identification of disease-induced genes can provide insights into the development of this syndrome. To identify the genes, we performed differentially expressed gene (DEG) analysis. The expression of the phosphoglycerate kinase (HrPGK) gene was significantly decreased in diseased sea squirts compared to normal ones. We confirmed the result of the DEG analysis through RT-PCR and real-time PCR. In addition, we detected single nucleotide polymorphisms at position -106 (A/T) and -254 (G/T) in the HrPGK gene promoter by genotyping analysis. At the -106 site of the HrPGK gene, the frequency of the AA allele in disease-resistant sea squirts was about two-fold higher than that of sensitive ones, and the frequency of the TT allele in the disease-resistant sea squirts was about six-fold lower. At the -254 site of the HrPGK gene, the frequency of the GT and the GG allele was approximately two-fold higher and two-fold lower, respectively, in the disease-resistant sea squirts compared to the disease-sensitive ones. Analysis of the relationship between the genotypic variation at the -106/-254 promoter and the expression of HrPGK mRNA showed that HrPGK mRNA expression was higher in the -106/-254 AA/GT genotype samples than in the -106/254 TT/GG genotype ones. These results show that sea squirts harboring the AA/GT genotype may have more resistance to mortality than the sea squirts with other genotypes.

Numerical study on the foam spraying for AFDSS applicable to initial fire suppression in large underground spaces (지하대공간 초동 화재진압에 적용가능한 자율형 소화체계의 폼 분사 해석 기법 연구)

  • Park, Jinouk;Yoo, Yongho;Kim, Whiseong
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.23 no.6
    • /
    • pp.503-516
    • /
    • 2021
  • Autonomous fire detection and suppression system requires advanced technology for complex detection technology and injection/control technology for accurate hitting by fire location. Also, foam spraying should be included to respond to oil fires. However, when a single spray monitor is used in common, water and foam spray properties appear different, so for accurate fire suppression, research on the spray trajectory and distance will be required. In this study, experimental studies and numerical analysis studies were combined to analyze the foam spray characteristics through the spray monitor developed for the establishment of an autonomous fire extinguishing system. For flow analysis of foam injection, modeling was performed using OpenFOAM analysis software, and the commonly used foaming agent (Aqueous Film-Forming Foam) was applied for foam properties. The injection distance analysis was performed according to the injection pressure and the injection angle according to the form of the foam, and at the same time, the results were verified and presented through the injection experiment.