• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.621-623
• /
• 2000

클러스터를 구성하는 단위 노드로 SMP가 새로운 대안으로 시장에 등장하였다. 이러한 멀티프로세서 클러스터(CLUMP)는 하나의 시스템에 다중 메모리 구조를 가지는데, CLUMP가 가지는 다중 메모리 구조를 효과적으로 사용하기 위해서 본 논문에서는 중첩된 병렬화 프로그램 모델을 제안하였다. 중첩된 병렬화 모델은 중첩된 루프 레벨의 병렬화, 중첩된 태스크 레벨의 병렬화, 그리고 다중 중첩된 병렬화로 나뉜다. 본 논문에서는 중첩된 루프 레벨의 병렬화를 실험대상으로 하여 그 성능을 평가하고 단일 메모리 구조의 병렬화 프로그램과 성능을 비교하였다. 실험 결과 시험한 중첩된 병렬화 모델이 단일 메모리 구조의 병렬화 프로그램에 비하여 좋은 성능을 나타내었지만, 실험대상이 된 루프 레벨 병렬화의 잠재적인 특징으로 인해 실행에 참여하는 노드 수가 많아질수록 성능 향상 폭이 감소하는 결과를 보였다. 프로그램의 성능 향상 폭과 확장성은 문제 크기가 클수록 좋은 특성을 보였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.198-206
• /
• 2009

This paper presents the reduction of the positional uncertainty of an ultrasonic sensor ring with overlapped beam pattern for the efficient obstacle detection of a mobile robot. Basically, it is assumed that a relatively small number of inexpensive low directivity ultrasonic sensors are installed at regular spacings along the side of a circular mobile robot with their beams overlapped. First, for both single and double obstacles, we show that the positional uncertainty inherent to an ultrasonic sensor can be reduced using the overlapped beam pattern, and also quantify the relative improvement in positional uncertainty. Second, given measured distance data from one or two ultrasonic sensors, we devise the geometric method to determine the position of an obstacle with respect to the center of a mobile robot. Third, we examine and compare existing ultrasonic sensor models, including Gaussian distribution, parabolic distribution, uniform distribution, and impulse, and then build the sensor model of overlapped ultrasonic sensors, adequate for obstacle detection in terms of positional uncertainty and computational requirement. Finally, through experiments using our prototype ultrasonic sensor ring, the validity of overlapped beam pattern for reduced positional uncertainty and efficient obstacle detection is demonstrated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.7
• /
• pp.32-38
• /
• 2009

In this paper, we consider the overlaid system of single frequency network broadcast service and cellular-based unicast data service. In general, broadcast service and unicast data service were considered as a separate services so that different frequency resources have been allocated for each. As the frequency resource get more expensive, however, there were some efforts to provide both the broadcast and unicast service over the same frequency resource by employing the so-called superposition coding. In fact, such an service overlay system has already been accepted as a standards in 3GPP long-term evolution (LTE). In this paper, we specifically investigate such overlay system within 3GPP framework and evaluate their performance in terms of BC coverage and UC data throughput.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.523-528
• /
• 2015

In this study, we evaluated the heating characteristics of single sonication and superposed two low-intensity ultrasonic sonication. Compare the results, the superposed sonication was showed a superior thermal effect than single sonication. And the maximum temperature was increased as 120-150%. The starting time of temperature rising has been shortened in superposed sonication. In addition, the time up to the maximum temperature has been shortened, too. In generally, as the ultrasonic intensity is higher, the more surface damage is occurred. However, in the case of superposed sonication, the same thermal effect had be confirmed without surface damage. Through the results of the study, we thought that the superposed sonication will be able to reduce the intensity of the ultrasonic treatment. And, by using the low-intensity, the more safe and more effect therapy will be possible in therapeutic ultrasound application.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.253-258
• /
• 2016

The development of translucent zirconia enabled clinicians to choose a monolithic zirconia crown as one treatment modality in the posterior dentition. Careful occlusal adjustments are recommended for monolithic zirconia crowns because grinding zirconia inevitably causes phase transformation, which may deteriorate mechanical properties. intraoral scanners enable the clinician to scan and superimpose a complete tooth structure before preparation onto the prepared abutment. This technique helps to reproduce the original tooth form and occlusion of the patient. In this case report, prostheses were fabricated for patients with cracked or fractured tooth by applying intraoral scanner, Computer aided design-computer aided manufacturing (CAD-CAM) and monolithic zirconia crown to reproduce the occlusion of original tooth and to minimize occlusal adjustment. The clinical results were satisfactory in both esthetic and functional aspects.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.656-659
• /
• 2011

X-선 검색장치는 대상체의 단면을 스캔하여 결과를 확인하기 때문에 정확성이 낮다는 것이 문제점으로 지적되어왔다. 이를 개선하기 위하여 선행연구로 스테레오 X-선 검색장치를 개발하여 단일 대상체에 대하여 윤곽선 정합 및 볼륨기반 형상복원 연구를 수행하였다. 본 연구에서는 스테레오 X-선 검색장치를 이용하여 두 개의 중첩된 대상체를 스캔하여 형상을 분리 복원하기 위한 연구를 진행하였다. 중첩 대상체에 대한 분리 복원을 위해 벡터정보의 거리값을 계산하여 내 외부 복셀을 분리하고 중첩부분에 대한 제거는 Z축을 기준으로 임계치를 두어 분리하는 알고리즘을 제안하였다. 3차원 스테레오 X-선 검색장치에 대한 스캔영상의 형상복원 알고리즘 개선을 통해 제한된 스캔환경에서 집적화된 대상체의 검색을 가능하도록 할 것이다.

• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.484-492
• /
• 2007

The blasting vibration prediction in the country is mainly carried out by using the scaled distance method. But, this method needs a real-scale test blasting. The blasting vibration prediction has been performed using the data measured at borehole blasting for the purpose of a geological investigation before beginning a construction of a tunnel. In this prediction method, it is difficult to reflect the propagation characteristics of ground vibration generated from a real-scale blasting. propagation. This paper presents a new method for estimating blasting vibration by using superposed data of single hole blasting waveform with a delay time.

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.280-288
• /
• 2008

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced vibration and the stability evaluation must be performed before blasting activities. Dynamic analysis using measurement vibration waveform which is measured by bore hole blasting or test blasting has been increased recently in order to analyze the effect of the blast-induced vibration. The waveform made by bore hole blasting has the similar vibration level and duration to those the waveform of sing hole has. However, there can be a little difference in attenuation characteristics with the blast induced vibration waveform in the field. Through the superposition modeling of single hole waveform, I obtained the vibration waveform on the blasting condition changes and conducted dynamic analysis using this waveform in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2004

GUI program for analyzing directional spectrum waves is introduced in this paper Basically, MLM (Maximum Likelihood Method) was used for this program which was additionally consisted of performing spectral and time domain analysis for two dimensional irregular waves. Moreover, the directionality of directional spectrum waves generated by single summation and double summation method was investigated based on MLM. The directionality from each summation method has good agreement compared with that of target wave spreading function in the case of single wide directional spectrum waves. In addition to this, the resolution of directionality in double summation method was investigated as introducing coherence function between each wave component

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.87-112
• /
• 2017

Overlap what images are laid on top of each other performs various purposes of artistic expressions. Especially, overlap to describe motion has been placed on lots of art fields analysing and connecting each part of motion. This kind of overlap is called as 'Locomotive overlap' and it is defined as 'Technique for multiplication to arrange simultaneously motions of single object on one screen'. Locomotive overlap was started from fine art and photography, so this static kind of it is classified as 'Static locomotive overlap'. Afterwards, film and animation succeeded static locomotion overlap and realized real dynamic locomotive overlap with moving images, so this dynamic kind of it is classified as 'Dynamic locomotive overlap'. Most of all, by Norman McLaren accomplished its own artistic value and aesthetics in locomotive overlap has been placed in the center of the history of locomotive overlap, so to analyze this work and to research before and after it will confirm context and artistic achievements of locomotive overlap. Nowdays locomotive overlap is extending its technology and dimension more and more on the strength of development of digital technology. Some of works using digital technology show new possibilities of locomotive overlap by reinterpreting original media and concept of . Ultimately, this research for locomotive overlap focusing on the analysis of confirms artistic achievements of locomotive overlap and suggests to contemplate the meaning and new possibilities of it.