• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.13-18
• /
• 2009

In this study, an equivalent unit load methodology has been presented to simplify the fatigue analysis procedure. And fuselage structure fatigue life has been evaluated based on equivalent unit load. Finite element analysis has been carried out to analyze the stress intensity factor and geometrical correction factor that is needed for crack growth analysis. And strain energy density factor is used to predict the initial direction of crack propagation.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1994.05a
• /
• pp.111-114
• /
• 1994

상대적으로 사하중에 비해서 활하중 영향이 민감하게 작용하는 농업시설의 경우, 경제성 및 안정성에 근거한 구조설계를 위해서는 활하중의 결정요인의 정확한 분석을 통한 합리적인 설계하중의 산정이 필요하다. 단위적설 중량은 적설심에 따른 구분을 사용한다면 대부분 적설심 50cm 이하의 범위에 속하기 때문에 일률적으로 1.0kg/cm/$m^2$ 을 적용해야 하지만, 정확한 적설하중 산정을 위해서 기온에 따른 단위 적설중량의 변화를 분석할 필요가 있다. (중략)

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.1
• /
• pp.65-72
• /
• 2003

The objective of this study is to estimate the frequency characteristics of group walking loads based on the information of measured responses. At first, dynamic properties such as natural frequencies and modes are obtained from input/output relation for building structures by heel drop test. Second, a method to estimate group walking loads by the transfer functions from measured responses to group walking loads is proposed. The method turned out to estimate the group walking loads accurately. Higher modes could be important in estimating the amplitude of group walking loads with the information of single walking load.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.16-16
• /
• 2017

국내 농업인구 감소 대비 식품소비량이 증가함에 따라 농가의 인력을 대체하고 다양한 작업이 가능하며 가격이 저렴한 국내 기계화 기술이 필요하다. 무동력 디스크해로우 작업기는 경운과 배토가 가능한 복합작업기로서 작업기를 구성하는 주요 구성품들은 필드작업에 의해 발생되는 하중에 구조적 강도와 신뢰성이 충분히 확보되어야 한다. 또한, 실제로 필드 작업 시 작업기에 걸리는 하중은 복합하중 형태로 전달되기 때문에 단순한 형태 하중에 비해 하중계측에 어려운 점이 있으므로 하중계측점의 선정이 매우 중요하다. 본 논문에서는 하중계측점을 선정하기 위하여 복합기의 주요 구성품인 치즐(chisel) 및 디스크해로우암(disk harrow arm)에 대하여 구조해석을 수행하였으며, 3축 방향의 단위하중 응력 계산결과로부터 load reconstruction을 위한 스트레인 게이지 위치를 선정하였다. 또한, 스트레인 게이지의 신호가 하중해석에 적절한 값이 되도록 기존의 형상을 수정하였다.

• Journal of Aerospace System Engineering
• /
• v.15 no.1
• /
• pp.80-85
• /
• 2021

In this study, for conducting a static load test of an external fuel tank used for an aircraft, the flight load acting on the external fuel tank was converted to the test load and the suitability of the converted test loads was confirmed. In order to calculate the test load from the flight load, the external fuel tank was divided into several sections. Shear load, moment by unit shear load, and unit moment were calculated for each section. Test loads for each section were then calculated by computing the shear load, the moment of each section, and flight load condition. In actual static load tests, it might not be possible to impose the test load in the calculated position due to physical constraints. Therefore, after determining positions in which the load could be imposed in the actual test, the test load calculated for each section was redistributed to selected positions. Finally, a test load plan was established by applying a whiffle tree to enhance the efficiency of the test performance while making it easier to operate the actuator. The reliability of the test load plan was verified by comparing it with flight load conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5C
• /
• pp.163-170
• /
• 2011

Perimeter load transfer functions were developed by an analysis of the static pile load test results of the 7 large diameter drilled shafts constructed in domestic areas. Using the pile axial load distributions obtained from the static pile load tests of large diameter drilled shafts, the unit skin frictions were analyzed and, based on unit skin friction test data, perimeter load transfer functions could be suggested. The load transfer distributions calculated by suggested functions and the load transfer functions obtained from the bi-directional pile load tests were compared. As a result, the 2 load transfer distributions were coincided, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.1
• /
• pp.41-46
• /
• 2008

In this study, the analysis of load transition of PHC pile was performed with the static load test, which was driven in deep soft clay layer of MyungJi site in the western area of Pusan. The results of test showed that the range of unit side resistance of pile in sand layer were $7.4t/m^2$ to $23.3t/m^2$ and $6.4t/m^2$ in the soft clay layer, while the unit base resistance was $955t/m^2$ in dense silty sand layer. To select the most reasonable static bearing capacity formular, the field measured values are compared with the calculated ones from the suggested various formular. In the case of side resistance in sand layer, the suggest formular in the Structural Foundation Design Manual by KGS was most reasonable, while in clay layer Railroad Design Manual.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.337-346
• /
• 2005

A composite bridge deck system assembled from a modular profile with double-rectangular cell has been developed for highway bridges. This study is focused on the experimental characterization of flexure performance of pultruded GFRP deck under static loading. Several tests were conducted on single modules and adhesively bonded 2 and 5-modules. The specimen details such as dimensions, material properties and fiber architecture, and experimental set-up and testing procedure have been addressed. It is found that the presented GFRP composite modular deck is very efficient for use in bridges.

• Geotechnical Engineering
• /
• v.12 no.6
• /
• pp.79-86
• /
• 1996

This study develops a new method for interpreting the yield load from load tests on drilled shaft foundations ended on general soils, which is defined as a point where the maximum curvature on the hyperbolic-approximated load-settlement curve occurs. How ever, the point of maximum curvature is a variable depending on the units and scales of the load and settlement. Therefore, to obtain a unique maximum curvature point, both the load and settlement must be normalized by proper parameters, respectively, and be expressed on the same scaled arses(1:1). Normalization has been processed so that the yield load by the new interpretation is to be close to the average of yield loads interpreted by other methods investigated in this study. The quantitative comparison between the new criterion and other conventitonal methods is presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.184-187
• /
• 2004

TFT LCD 생산 공정에 사용되는 정밀측정/검사/생산장비가 위치하는 바닥의 진동문제는 크게 장비자체의 가동에 의한 것과 장비외부의 가진원에 의해서 정밀장비의 바닥에 진동이 발생하게 된다. 이러한 진동문제는 건물을 설계 시공하는 건축자의 입장에서는 장비 가동전 건물 인수시 진동문제에 관심이 있으나 장비를 운영하는 사용자의 입장에서는 장비 가동전의 진동문제와 더불어 장비 가동시 장비내부의 진동원에 대해서도 진동대책을 요구하게 된다. 따라서 양자의 진동문제 해결을 위해서는 정밀장비 주변의 진동원에 대한 동하중 설계자료와 함께 장비 가동시 바닥에 진동을 발생시키는 진동원인 장비에 대해서 동하중을 파악하여야 한다. 장비기초의 단위하중에 대한 진동응답을 표현하는 주파수 전달함수는 이러한 동하중과 바닥의 진동허용규제치를 동시에 표현하는 요소로 기존의 정밀장비가 요구하는 장비바닥의 진동허용규제치와 함께 동하중을 유발하는 장비기초에서는 반드시 구조물의 동강성 허용규제치를 이용한 구조물의 동적설계가 요구된다.