• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2011

This study was carried out to clarify precise $CO_2$ demands of paprika plants (Capsicum annumm L.) by measuring photosynthesis rates of the leaves in high, low positions, and the $CO_2$ consumption of a whole plant in a large sealed chamber. A photosynthesis measuring system (LI-6400) was used to measure the photosynthetic rates of the leaves located in different positions. A large sealed chamber that can control inside environmental factors was developed for measuring $CO_2$ consumption by a whole paprika plant. With increase of radiation, photosynthetic rates of the leaves in higher position became larger than those in lower position. The $CO_2$ consumption by the plant was estimated by using decrement of $CO_2$ concentration from initial level of 1500 ${\mu}mol{\cdot}mol^{-1}$ in the chamber with increase of integrated radiation. A regression model for estimating $CO_2$ consumption by the plant (leaf area = 7,533.4 $cm^2$) was expressed with integrated radiation (x) and was suggested as $y=-0.06234+3.671^*x/(2.589+x)$ ($R^2=0.9966^{***}$). The photosynthetic rate of the whole plant measured in the chamber was 3.4 ${\mu}mol\;CO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under 300 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity, which is in-between photosynthetic rates of the leaves in high and low positions. For this reason, some differences between required and supplied $CO_2$ amounts in greenhouses might occur when depending too much on photosynthetic rates of leaves. Therefore, we can estimate more accurately $CO_2$ amount required in commercial greenhouses by using $CO_2$ consumption model of a whole plant obtained in this study in addition to leaf photosynthetic rate.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.311-336
• /
• 2015

This article surveys the current international law with respect to RPAS from both the public air law and private air law perspectives. It then reviews current and proposed Australian domestic RPAS regulation while emphasizing the peculiar risks in operation of RPAS; and how they affect concepts of liability, safety and privacy. While RPAS operations still constitute only a small portion of total operations within commercial aviation, international pilotless flight for commercial air transport remains a future reality. As the industry is developing so quickly the earlier the pursuit of the right policy solutions begins, the better the law will be able to cope with the technological realities when the inevitable risks manifest in accidents. The paper acknowledges that a domestic or regional approach to RPAS, typified by the legislative success of the Australian experience, is and continues to be the principal measure to deal with RPAS issues globally. Furthermore, safety remains the foremost factor in present and revised Australian RPAS regulation. This has an analogue to the international situation. Creating safety-related rules is imperative and must precede the creation or adoption of liability rules because the former mitigates the risk of accidents which trigger the application of the latter. The flipside of a lack of binding airworthiness standards for RPAS operators is potentially a strong argument that the liability regime (and particularly strict liability of operators) is unfair and unsuited to pilotless flight. The potential solutions the authors raise include the need for revised ICAO guidance and, in particular, SARPs with respect to RPAS air safety, airworthiness, and potentially liability issues for participants/passengers, and those on the ground. Such guidance could then be adapted swiftly for appropriate incorporation into domestic laws bypassing the need for or administrative burden and time it would take to activate the treaty process to deal with an arm of aviation that states know all too well is in need of safety regulation and monitoring.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.233-238
• /
• 2007

To assess pollutant loads in Nakdong river from highland agriculture in Kyungbuk province we. analyzed water qualities such as BOD, COD, T-N, T-P and SS in year 2005. BOD values in rainy period (June and July) were relatively higher than those in dry period, and those in 4 sites among 17 sites ranged from 10.71-19.25 mg/L which exceeded water criteria (8 mg/L) for agricultural use. COD values showed similar trends like BOD values. These trends might be caused by outflow of nutrients applied in agricultural lands. T-N content ranged from 0.1 to 14 mg/L. Those in lower reaches of stream were greater in those in upper stream. Compared to T-N contents during non-farming season, T-N content in farming season were higher. These phenomenon could be due to continuous input of nutrients from small watercourses. Averaged T-P content in lower stream during farming season was 0.4 mg/L, which was eight times higher than the limiting level for algae occurrence (0.05 mg/L). BOD, T-P, T-N loads from alpine agricultural practices were 12.25 $kg/km^2{\cdot}day$, 0.55 $kg/km^2{\cdot}day$ and 32.35 $kg/km^2{\cdot}day$, respectively. These values were greater than those from forestry. Therefore, Best management Practices (BMP) for alpine agricultural field are needed to reduce pollutant loads in Nakdong river.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.893-900
• /
• 2009

To estimate the contribution of epiphytic algae attached on reed to organic matter production in constructed wetland, primary productivity by epiphytic algae was investigated in two sub-wetlands (Banweol and Donhwa wetlands) of the Sihwa Constructed Wetland (CW) with different chemistry of inflows. Chlorophyll a concentration of epiphytic algae was higher in the Banweol wetland (range:37~3,581 mgChl.a/$m^2$surface stem, average:655 mgChl.a/$m^2$surface stem) than the Donhwa wetland (range:87~2,093 mgChl.a/$m^2$surface stem, average:527 mgChl.a/$m^2$surface stem). In contrast, assimilation number (AN) representing photosynthetic activity was higher in the Donhwa wetland with low TN/TP ratio than the Banweol wetland. A negative correlation (r=0.46) was observed between TN/TP ratios of inflows and AN in two wetlands, implying that high photosynthetic activity of epiphytic algae may be related with low TN/TP ratio. The areal primary productivity ranged from 307 to 2,473 mgC/$m^2$/day in the Banweol wetland and from 756 to 2,096 mgC/$m^2$/day in the Donghwa wetland, showing high productivity in summer. Average primary production was lower in the Banweol wetland (1,166 mgC/$m^2$/day) than the Donghwa wetland (1,467 mgC/$m^2$/day), although the standing crop (as chlorophyll a concentration) was high in the Banweol wetland. This result may be due to the low photosynthetic activity of epiphytic algae in the Banweol wetland with high TN/TP ratio. The annual primary production (300 tonC/year) of epiphytic algae contributed 33% of the total production in the Sihwa CW. An excessive organic matter production in constructed wetland can negatively affect the efficiency of water treatment. Therefore, the role of epiphytic algae should be considered in management of constructed wetland for water treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.225-233
• /
• 2019

This study was conduct to investigate the effect of mixed seed sowing and flour blending on the uniformity of flour quality of Korean domestic wheat. Two wheat varieties (Keumkang and Baegjoong) were selected for sowing mixed seeds, and their growth characteristics and flour quality were analyzed. Quality of flour blending with the same varieties was also evaluated. The ratios for mixed seed sowing and flour blending were from 0 to 100% with a 10% increase of interval for each treatment. On increasing the portion of Baegjoong in mixed seed sowing, the heading time was a little delayed, however, yield increased. The results of the flour quality showed lower damaged starch content and sodium carbonate SRC (solvent retention capacity) value for Keumkang than for Baegjoong. Protein quantity by protein content and quality by SDSS (Sodium Dodecyle Sulfate-Sedimentation) volume, lactic acid SRC, and mixograph pattern of Keumkang were superior to those of Baegjoong. Compared with mixed seed sowing, overall quality characteristics of flours with different ratios showed predictable and proportional change by flour blending. This demonstrated the successful application of flour blending, compared with mixed seed sowing, for improving the uniformity of flour quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.392-402
• /
• 2021

The present study investigated the effects of tillage practices (deep cultivation [DC] and conventional tillage [CT]) and extended planting dates (mid-June to July) for maize-onion rotation in paddy fields. The silage corn (Zea mays L.) cultivar 'Kwangpyeongok' and the waxy corn cultivar 'Ilmichal' were planted on June 14, July 3, and July 15 in 2019. In both maize, the plant height of June 14 planted was up to 100 cm greater than that of July 15 planted on August 16 and up to 40 cm on August 30. At 30 Days after planting, the leaf area index (LAI) of silage corn planted on July 3 and 15 greater than that of corn planted on June 14 due to high temperature in the early season; however, there were no differences in the LAI of waxy corn according to the planting date. Despite favorable temperature, plants sown on July 3 and 15 experienced high moisture stress during the seedling stage due to consistent rainfall, and waxy corn was highly sensitive to high moisture stress. The total yield of silage corn was 1,232 (845 in TDN), 860 (598 in TDN), and 765 (508 in TDN) DW kg·10a^-1 for plants sown on June 14, July 3, and July 15, respectively. The fresh marketable ear yield of waxy corn was 872, 814, and 525 FW kg·10a^-1 for plants sown on June 14, July 3, and July 15, respectively. After the completion of maize cultivation, onion seedlings (Allium cepa L.) were transplanted on November 12, 2019, and harvested on May 27, 2020. Neither summer tillage nor maize planting date affected onion growth or yield. The marketable onion yield was 8,305 and 7,848 kg·10a^-1 with DC and CT, respectively. In conclusion, DC did not improve maize growth or yield under paddy conditions. Mid-June to early July is a practical window for maize planting for growers in this region.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.1
• /
• pp.11-21
• /
• 2023

This study was conducted to estimate the damage of Whole Crop Corn (WCC; Zea Mays L.) according to abnormal climate using machine learning as the Representative Concentration Pathway (RCP) 4.5 and present the damage through mapping. The collected WCC data was 3,232. The climate data was collected from the Korea Meteorological Administration's meteorological data open portal. The machine learning model used DeepCrossing. The damage was calculated using climate data from the automated synoptic observing system (ASOS, 95 sites) by machine learning. The calculation of damage was the difference between the dry matter yield (DMY)_normal and DMY_abnormal. The normal climate was set as the 40-year of climate data according to the year of WCC data (1978-2017). The level of abnormal climate by temperature and precipitation was set as RCP 4.5 standard. The DMY_normal ranged from 13,845-19,347 kg/ha. The damage of WCC which was differed depending on the region and level of abnormal climate where abnormal temperature and precipitation occurred. The damage of abnormal temperature in 2050 and 2100 ranged from -263 to 360 and -1,023 to 92 kg/ha, respectively. The damage of abnormal precipitation in 2050 and 2100 was ranged from -17 to 2 and -12 to 2 kg/ha, respectively. The maximum damage was 360 kg/ha that the abnormal temperature in 2050. As the average monthly temperature increases, the DMY of WCC tends to increase. The damage calculated through the RCP 4.5 standard was presented as a mapping using QGIS. Although this study applied the scenario in which greenhouse gas reduction was carried out, additional research needs to be conducted applying an RCP scenario in which greenhouse gas reduction is not performed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.45-49
• /
• 2010

Purpose: Several radiopharmaceuticals were used for cisternography. But recently, due to more short acquisition time, high resolution than other radiopharmaceuticals like In-111 DTPA, we were using Tc-99m DTPA in cisternography. Using of Tc-99m DTPA for intrathecal, was not officially recognised by the FDA. And there are matters of aseptic meningitis, muscular tetany, seizures by inappropriate radiopharmaceuticals handling. So, it is necessary to prevent adverse reactions while handling the radiopharmaceuticals using in cisternography. Therefore, this study aims to evaluation of usefulness and procedures for safety of radiopharmaceuticals in cisternography. Materials and Methods: Subjects were 12radioactive tracer vials using in cisternography in 2008 Dec. 16 - 2009 Dec. 30. (1) Radioactive tracer Vial test - We were measured NaPertechnetate radiation dose and volume, normal saline volume for dilution, source volume and dose activity for patient injection. And then, calculated mass of pure DTPA. (2) Bacterial endotoxin test - We performed pyrogen test using by negative/positive control vials which was added normal saline 0.2 mL and added normal saline 0.1 mL, Tc-99m DTPA 0.1 mL in test control vial. And then, reacted by digital hot plate in $37.5^{\circ}C$ for 1 hour and compared of gel-clot in each control vials. (3) Compliance safety procedure - We were checked safety issues and wrote out a safety procedure exam sheet. Results: (1) Radioactive tracer Vial test - Mass of DTPA per dose for patient injection (mg) was 0.88 (mg) on average, and Mass of DTPA per volume for patient injection (mg) was 0.74 (mg) on average. (2) Bacterial endotoxin test - All control test vials showed negative reactions. (3) Compliance safety procedure - We were checked safety issues and wrote out a safety exam sheet in all the exams. So, there were no adverse reactions. Conclusion: We could examine easier to safety tests using by Techscan - DTPA (Mallinckrodt): CaNa3. Each test results were passed the safety tests and there are no adverse reactions. The use of Tc-99m DTPA for cisternography, always has been become an issue. Since it has occur adverse reaction while examine the cisternography using by Tc-99m DTPA, it needs to set up the 'Standard Operating procedures'.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.9-18
• /
• 2015

Purpose: The purpose of this study is to examine characteristics of implant surface with RBM and anodizing treatments, and to evaluate the responses of osteoblast-like cell (MG-63 cell). Materials and methods: Grade IV titanium disks were fabricated (Diameter 10 mm, thickness 3 mm). Anodizing treatment (ASD) group, RBM and anodizing treatment (RBM/ASD) group, control (machined surface) group were divided. In this study, osteoblast-like cell was used for experiments. The experiments consist of surface characteristics evaluation by FE-SEM images, energy dispersive spectroscopy and stereo-SEM. In order to evaluate cell adhesion evaluation by crystal violet assay and observe cells form by confocal laser microscopy. To assess cell proliferation by XTT assay, cell differentiation by RT-PCR and mineralization by Alizarin red S stain assay. ELISA analyzer was used for Quantitative evaluation. Comparative analysis was run by one-way ANOVA (SPSS version 18.0). Differences were considered statistically significant at P<.05. Results: In ASD group and RBM/ASD group, the surface shape of the crater was observed and components of oxygen and phosphate ions in comparison with the control group were detected. The surface average roughness was obtained $0.08{\pm}0.04{\mu}m$ in the control group, $0.52{\pm}0.14{\mu}m$ in ASD group and $1.45{\pm}0.25{\mu}m$ in RBM/ASD group. In cell response experiments, ASD group and RBM/ASD group were significantly higher values than control group in cell adhesion and mineralization phase, control group was the highest values in the proliferative phase. In RT-PCR experiments, RBM/ASD group was showed higher ALP activity than other groups. RBM/ASD group in comparison with ASD group was significantly higher value for cell adhesion and proliferation phase. Conclusion: In the limitation of this study, we are concluded that the surface treatment with RBM/ASD seems more effective than ASD alone or machined surface on cellular response.

• Korean Journal of Environment and Ecology
• /
• v.30 no.3
• /
• pp.406-414
• /
• 2016

This study examined the factors by which people choose auto-camping as their primary leisure activity after conducting a questionnaire survey of the visitors to the Chiaksan national park Guryong auto-campground. The majority of the visitors were employed (60%) in their 30s and 40s (85%) with relatively high education (88% of which had bachelor's degree or higher) and income levels (87% of which had family income greater than KRW30 million). Most visitors were family group visitors (82%), and for many visitors, auto-camping appeared to be their primary leisure activity as 24% of the respondents said that they visited auto-campground more than 10 times a year. Only 18% of the visitors had auto-camped for longer than 5 years, indicating that auto-camping is a relatively new leisure activity that has become popular in recent times. Factor analysis with 19 items that measured the degree of agreement on the relative advantages of auto-camping extracted four latent factors that affected the selection of auto-camping as a leisure activity: factor 1 (refreshment through contact with nature), factor 2 (novelty and a sense of accomplishment), factor 3 (convenience), and factor 4 (entertainment). Results of regression analysis that examined the effects of the four extracted factors on the visitors' level of satisfaction on auto-camping (measured by the number of visits to auto-campgrounds per year) indicated that 'refreshment through contact with nature' was the most critical factor when deciding to select auto-camping as their leisure activity. 'Novelty and a sense of accomplishment' and 'convenience' were also statistically significant -but to a lesser degree, whereas 'entertainment' did not statistically significantly affect the visitors' decision. These results suggest that, for designing and managing auto-campgrounds, it is more important to preserve the surrounding nature than to provide more facilities for campers' convenience and entertainment.