• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.684-692
• /
• 2007

The object of this study is to identify the factors that is making and promoting cooperation for the unified forest fire administration, and then introduce cooperation process and cooperation manual for an effective forest management. For this purpose, the case studies were carried about "The East Coastal Forest Fire Administration Center" and "The Forest Fire Administration Center in Mt. Jiri Area" to have obtained excellent results by cooperation among administrative districts, and cooperative factors were extracted through analyzing each steps. That is, cooperation steps were divided into 4 steps of Initiation, Planning, Implementation, Benefiting, and in-depth interview and questionnaires were carried for extracting cooperation factors by each step for the unified cooperative forest management system. And with AHP analysis, essential four factors were extracted by each step based on priority order. Finally with the base of the essential 4 factors by each step, the cooperation process and manual appliable to forestry cooperation project were developed. This will be a guideline in order to achieve successful forest administrations through the cooperation among local administrative governments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1623-1631
• /
• 2016

There are many researches which analyze vulnerability for combat systems, have been progressing, and apply the analyzed result to reflect on design phase. Recently, there have been requirements for integrating the previous module based researches which conducted independently. In this paper, we propose an integrated vulnerability analysis method for the combat system considering characteristics of threats and protection performance of armors through an analysis of the advanced research. In addition, by applying the proposed method improves the existing hit probability analysis program and we are verified based on scenarios for improving survivability of PKM (Petrol Killer Medium) for vulnerability analysis confirmed the results. The proposed method improves reliability of vulnerability analysis by considering threats and defense ability. Also it able to satisfied with the integration requirements. Furthermore, we became buildup for the development of applied system and the method and integrated vulnerability analysis method for combat systems.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.85-100
• /
• 2003

Today's computing system has expanded its application to business trade and distributed work transactions using the Internet. As the demand for more flexible, adaptable, extensible, and robust web-based enterprise, these application development has been gradually expanded based on reusable, independent, and portable components. Component Based Development (CBD) works by developing and evolving software from selected reusable software components and then assembling them within appropriate software architecture. However, it requires an increase in cost to build new components as well as the necessary effort to develop of the business requirement these components. Standardized component models are required as well from the perspective of systems in order to support rapid and exact component information transmission on the web. In this paper, we describe the e-Business Component Development with agent for rapid application development on the web that correspond to the demands of users in the business domain. We design and implement the specifications of e-business components by combining these demands. In order to improve the agent register and retrieval, we propose the intelligent search and register agents, which can conduct more precise searching and specializing for components. The system enables the locating of user's frequently used components through an agent involving register and retrieval, as well as rapid procedures for registers The e-BCOS (e-Business Component System) is the agent system for the user to register distributed components and to search for components Information. The e-BCOS increases reusability through the e-business component development of distributed components in the business domain. For the share and delivery, specification with XML is acceptable to user's variable order e-BCOS Includes the effective investment, timeliness, reliability, efficiency, and maintenance effort by with agent.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.383-392
• /
• 2011

The basic research of the estuarine circulation at Gyeong-Gi bay has not been well studied up to now, although coastal development pressures have been continuously increased. To understand the oceanographic phenomena at the Han River estuary, it's essential to understand the propagation characteristic of tidal wave which is the strongest external forcing in this region. In this study, we investigate the tidal wave propagation characteristics along the 3 major channels using observation data and numerical model. It is found that 3 channels are all hyper-synchronous and the most important physical factor controlling the tidal wave propagation is topographical convergence of estuary shape and friction. The result of analytic solution at ideal channel considering the topographical convergence and friction show that the contribution of physical role of convergence and friction varies at 3 different channel. And the ratio of convergence and friction at Yeomha channel is four times larger than Seokmo channel. Because of this effect, the location of maximum amplitude at Yeomha channel is showed up downward than Seokmo channel. The ratio of decreasing amplitude and increasing phase per unit distance between stations is bigger than Seokmo channel. Although 3 major channel show a hyper-synchronous pattern, Yeomha shows more frictionally dominant channel and Seokmo channel is more dominantly affected by convergence effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.482-488
• /
• 2011

Seadike is a coastal structure constructed in the rear region of the foreshore to maximize its usability by preventing direct effect of wave. The expected construction field is determined under the design wave and tidal condition where minor wave overtopping is anticipated. Thus, the location of seadike is generally fixed at the highest site of the surrounding area with seadike crest height controlling the permissible range of wave overtopping volume. But a lot of times, frontal sand beach of the seadike continuously deforms due to incident waves, resulting failure in maintaining its initial slope. The erosion and deposition of the seadike front cause changes in the crest height and volume of wave overtopping and decrease in the setting depth of the seadike, which endangers seadike region as a result. In this study, the relation of local scouring and setting depth of the seadike front in the run-up region is examined by using 2D hydraulic model tests and numerical simulations by modified SBEACH model. As a result, the study learned that if appropriate boundary condition is applied to the modified SBEACH model, it is possible to create practical estimations on the local scouring at the seadike foot when erosive waves flow into the region.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.210-217
• /
• 2015

Fluoride removal by acid and heat treated red mud were studied in batch and column system regarding contact time, initial concentration, pH, adsorbent dose, and filter depth. The results showed that acid treated with 0.8 M HCl, had highest adsorption capacity of fluoride and adsorption capacity decreased as heat treatment temperature increased. Sorption equilibrium reached in 30 min at a initial concentration of 50 mg-F/L but 1 h was required to reach the sorption equilibrium at the initial concentration of 500 mg-F/L by 0.8 M acid treated red mud (0.8 M-ATRM). Equilibrium adsorption data were fitted well to Langmuir isotherm model with maximum fluoride adsorption capacity of 23.162 mg/g. The fluoride adsorption decreased as pH increased due to the fluoride competition for favorable adsorption site with $OH^-$ at higher pH. Removal percentage was increased but the amount of adsorption per unit mass decreased by adding the amount of 0.8 M-ATRM. It was concluded that the 0.8 M-ATRM could be used as a potential adsorbent for the fluoride removal from aqueous solutions because of its high fluoride adsorption capacity and low cost.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.480-492
• /
• 2013

After the introduction of geothermal power generation technology based on engineering reservoir creation that can be applied on non-volcanic region, industrial need for studies on the efficient and economic execution of costly deep-depth drilling work becomes manifest increasingly. However, since it is very difficult to predict duration and cost of boring work with acceptable reliability because of many uncertain events during the execution, efficient and organized work management for drilling is not easily achievable. Especially, the round trip that discretely occurs because of the abrasion of bit takes more time as the depth goes deeper and it has a great impact on the work performance. Therefore, a technology that can simulate the occurrence timing and depth of round trip in advance and therefore optimize them is essentially required. This study divided the abrasion state of bit into eight steps for simulation cases and developed a forecast algorithm, i.e., TOSA which can analyze the depth and timing of round trip occurrence. A methodology that can divide a unit section for simulation has been suggested; while the Bourgoyne and Young model has been used for the forecast of drilling rates and bit abrasion extent by section. Lastly, the designed algorithm has been systemized for the convenience of the user.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.35-45
• /
• 2010

The soil tests have been performed on the specimens obtained from about 1,150 sites including landslides and non-landslides areas in natural terrains for last 10 years. Based on the results of those tests, the average soil properties are estimated and the simple equations for estimating permeability are proposed according to geologic conditions. The average permeability in Granite and Mudstone sites is higher than other sites and the content of silt and clay in Mudstone and Gneiss sites is higher than other sites. The correlation analysis and the regression analysis were performed to estimate the coefficient of permeability according to geological conditions. As the result of the correlation analysis, the coefficient of permeability is selected as a dependent variable, and the silt and clay contents, the water contents and the dry unit weights are selected as independent variables. As the result of the regression analysis, the silt and clay contents and the void ratio were involved commonly in the linear regression equations according to geological conditions. To verify the proposed the linear regression equations, the measured result of the coefficient of permeability at other sites was compared with the result predicted with the proposed equations. As the result of comparison, there were a little bit different between them for some data. However the difference was relatively small. Therefore, the linear regression equations for estimating the coefficient of permeability according to geological conditions may be applied to Korean soils. However, these equations should be verified and corrected continuously to improve the accuracy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.3
• /
• pp.280-287
• /
• 1997

This study was carried out to investigate agricultural status and soil fertility of Bonghwang-cheon watershed area which is located at Chodong-myeon, Milyang-si. The acreage of arable land was about 1,209ha, and the population was 3,706 people. Out of total arable land, paddy was 64.4%, upland 19.6% and orchard 16.0%. Chicken was the largest in the number of livestock and poultry, but pig seems to contribute most severly to water pollution. The geology in the lower stream was alluvium but andesite and derivated materials from it were occupied most upland areas. Tuff was scattered in the small area near by the alluvium of Nakdong river, and diorite and granodiorite were located at the low hill and mountains respectivately. The principal paddy soils in the area were Geumgog, Jisan and Imgog series etc of fine loamy on sloped valleys and fans. The Pyeongtaeg series, fine silty family of imperfectly drained on plain was irrigated by Chodong reservoir. The clayey Honam series on alluvium was distributed along the low hill while Gyuam series, coarse silty alluvial soil way close to Nakdong river. In chemical properties of soils, the vinyl house soils were higher in EC, and orchard soils in OM, $P_2O_5$, exchangeable canons than other soils.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.